When I spawn in the npc's, they always walk on the same block, making them look like a big blob. Is there a way for the npc's to just bump into each other instead of going threw each other?
Fun Fact: You can make NPCs run multiple commands for one button. For example, let's say that you make a button named "Despawn Monsters". You could type the following commands into the command box (make sure to include the slashes (/) and press the Enter button after every command!) /difficulty peaceful /difficulty normal /say OK, I've despawned all monsters that were in the world; but more can spawn. I tried it out on my Nintendo Switch. Hope this helps! Have a wonderful day and may God bless you. Jesus Christ loves you! You're priceless and irreplaceable and you matter! Please stay safe and healthy. ^_^
@@noobm4n Sorry I'm replying late. Of course, you're welcome! May God bless. Jesus Christ loves you! You're precious and irreplaceable and you matter! Take care. :)
when you were trying to have it change gamenode you had forgotten it acts as a command block. so you would have to add @p or @a or whatever you wanted to that to make it work
Hello, so i just found out about these npc recently actually working so i ran across your video upon further inspection. If im not mistaken, to have it change your gamemode you need parameters (@p, @a, @r). So if you wanted to change the person's gamemode who is talking to tge npc, going "/gamemode c @p" should work unless someone else is close to the npc.
/gamemode isn't working because you're not setting the target. With NPC's, or the dialogue windows in general, you can enter @initiator where you would normally put like @s or whatever to refer to the player who triggered the convo
The NPCs seem to take a minute or two to register changes to its commands. It’s 2021 and judging by the date of this video, it’s seems this is a still an issue
This is very very late lol 😂 but if anyone sees this it always does this with npcs. When you want to specify them with their name, it says “no target matches selector”. So here’s a solution: Go basically inside the npc and you don’t need a command block and just command “/tag @e[r=1] add (whatever you want i will do a random one) A” after that you can move away from them. It should say “added “A” to 2 entities.” After that, you command “/tag @s remove A” and instead of saying “@e[name=“ in the command block you say “@e[tag=]” After that: There is one more that doesn’t work on some platforms it might on yours but it didn’t on mine. If it won’t work bc of the “tp”, say “run tp” instead of just tp. Hope this helps!
execute @e[name=Usee] ~ ~ ~ to ^ ^ ^0.68 facing @e[name=gwithworldpe.rm=5] is the command for them following you ina repeat command block with the user as the name u want
You could tp the npc to a iron golem to it with invisiblity It also makes it walk around but it wont follow you or you could use dogs but then you have to attack the mobs before they attack it
I got my npc to follow me but every time it walks it spams my chat with commands can you make a vid on how to fix that? If not then I'll look back to see if I made a mistake
Really needed some help. Doesn't work. execute @e[name=Tyler] ~ ~ ~ tp ^ ^ ^0.80 facing @e[name=Mason,rm=5] i tried this but the npc didn't follow me. Need some help please
If u wanna get d span egg /give @a spawn_egg 1 51
I knew that already
Thanks! But I know already! ☺️
Instead of @a you can use @p @s @a means every player @s means self @p means closest player
Oh
Spawn*
6:50 Is what you may have come here for.
😀
yep
TY
Yessir
You can get the dog to take the effect of invisibility And make the npc tp to the dog And it's going to look like the npc is moving
But invisibility only lasts 8 min max?
Man, you're a GENIUS! How's your comment isn't pinned yet?
You helped me so much, dude. Thx.
@@pedroson1424 😎
And you can use villagers for wandering
When I spawn in the npc's, they always walk on the same block, making them look like a big blob.
Is there a way for the npc's to just bump into each other instead of going threw each other?
Fun Fact: You can make NPCs run multiple commands for one button. For example, let's say that you make a button named "Despawn Monsters". You could type the following commands into the command box (make sure to include the slashes (/) and press the Enter button after every command!)
/difficulty peaceful
/difficulty normal
/say OK, I've despawned all monsters that were in the world; but more can spawn.
I tried it out on my Nintendo Switch.
Hope this helps!
Have a wonderful day and may God bless you. Jesus Christ loves you! You're priceless and irreplaceable and you matter! Please stay safe and healthy. ^_^
THANKS this will be very helpful for me
Can you make them walk around…. Per se a building?
That’s really cool! I didn’t know that! Wish you could do that with command blocks too.
even though this is a year old, ur still hella awesome thanks my guy
@@noobm4n Sorry I'm replying late. Of course, you're welcome! May God bless. Jesus Christ loves you! You're precious and irreplaceable and you matter! Take care. :)
when you were trying to have it change gamenode you had forgotten it acts as a command block. so you would have to add @p or @a or whatever you wanted to that to make it work
Or @s
I bet he was having a mega OOF Moment
@@TheFidionianempire735 im sad that oof got deleted
Hello, so i just found out about these npc recently actually working so i ran across your video upon further inspection.
If im not mistaken, to have it change your gamemode you need parameters (@p, @a, @r). So if you wanted to change the person's gamemode who is talking to tge npc, going "/gamemode c @p" should work unless someone else is close to the npc.
Btw nice vid
So how i found NPCS my friend found it in commands and did /give @s spawn_egg 1 51
/give @s spawn_egg 1 51
It's in Minecraft
Your Dp Is Cute
These are great for maps and so they were added in nether update!
They weren’t added in the nether update... you’re not the brightest person I see
why are the NPC names not showng up without looking at it?
You can change game mode you need typ /game mode 1 @p or 0
/gamemode isn't working because you're not setting the target. With NPC's, or the dialogue windows in general, you can enter @initiator where you would normally put like @s or whatever to refer to the player who triggered the convo
How to do when i press a button and they still talk?
The NPCs seem to take a minute or two to register changes to its commands. It’s 2021 and judging by the date of this video, it’s seems this is a still an issue
This guy should have one million subs
yes, he should! no, i mean really!
I’m on switch and Xbox I I can’t click on the box the change what he says on the bubble can someone help?
My npcs became my family
I try to tp it but it says no targets matched the thing or whatever it says can someone help me plz
This is very very late lol 😂 but if anyone sees this it always does this with npcs. When you want to specify them with their name, it says “no target matches selector”.
So here’s a solution:
Go basically inside the npc and you don’t need a command block and just command “/tag @e[r=1] add (whatever you want i will do a random one) A” after that you can move away from them. It should say “added “A” to 2 entities.” After that, you command “/tag @s remove A” and instead of saying “@e[name=“ in the command block you say “@e[tag=]”
After that:
There is one more that doesn’t work on some platforms it might on yours but it didn’t on mine. If it won’t work bc of the “tp”, say “run tp” instead of just tp.
Hope this helps!
The best content ever
Nice for my maps :)
The edit dialog is for the dialog of the NPC and the buttons are like the player doing that!
6:10 this might be what you looked for
I need the command for making the npc follows me
I think if you want to change the gamemode with the bot und have to give him OP and then Write /set gamemode 1 in the Advanced Settings from the bot
execute @e[name=Usee] ~ ~ ~ to ^ ^ ^0.68 facing @e[name=gwithworldpe.rm=5] is the command for them following you ina repeat command block with the user as the name u want
How does the nbc move why I like 2:34
I don’t get coordinate part what do they have to be?
My command block says: Syntax error: Unexpected “0.80”: at “ ~ talk later ^ ^ >>0.80
You have to spawn Npc with name already just worked for me on playstation
You can also write /give @s 64 51
Thanks this helped alot
Thank you
This is dope. Thank you!
Please tell a command that makes npc play with us
Good video dude.
¿Any way to make the NPC free roam?
Maybe make a loop of the command?
@@skyloh258 how would that work
Use villagers
How to fix it saying (npc) hello even tho npc is not its name
Omg thx so much
Very helpful
How did you get it to say the name?
The jet thing doesn’t need a command It’s just that you need to be in survival mode
It won’t let me turn on button mode
thanks this helps
Hi i have minecraft 1.20 is it going to work still?!
Yes I can make a friend now because i don't have a friend
COPYRIGHT
[Holy Strikes, lol]
@Vigozzz STRIKE IV
@@Jeremaiii114 STRIKE V
RAMESH M RAMESH HEMANTH *_STRIKE VI_*
how do i make it to a random person that joins my server
Soo i cant edit the diolauge on my ps4 why is that? Im in creative mode with op and im clicking it
I’m having the same problem, I’m trying to find answers but can’t hopefully it’s a glitch that gets patched soon.
execute @e[name=Jeff] ~ ~ ~ tp ^ ^ ^0.68 facing..
It can change gamemode , just tell it the @person u want to change gamemode
It can do game mode you forgot / first /gamemode survival @p
It won't allow me to touch the "type dialog here." I'm unsure as to how I cannot
4:52 its /gamemode c @p
Idk it needs / or not
Thanks
Wait how can you go on realms on Bedrock? I'm on Bedrock PS4 and I can't.
PS4 doesn't have realms/server compatibility yet
Oof
For some reason, my npc doesn’t speak, even I type the say command
/say ur momma gae
@@HcazZach IT DOESN'T NEED A SLASH
@@obbymaster357stickman6 yeah I know
I don’t understand the Coordinates part of the command block
You need to on coordinates for that pub
It can set game modes you just tipped it wrong is setgamemode c-a-s @a-p
Can you have like a proper conversation with an NPC ?
Vigozzz ok then we have to wait for a future update 😭
Hi luffy!
Lord Vomapoo 🙃
@@MELIODAS-hl5mm Uhhh, d-DONT HIT ME!! PLEASE!!!!! I'M SORRY!!! PLEASE FORGIVE ME!!!!
Haha I won’t 😉
Is there a way to make it fight mobs?
Not really, unless you do /kill lol
@@FirstMC haha so funny. Not really
@@skyloh258 chill out my guy
You could tp the npc to a iron golem to it with invisiblity
It also makes it walk around but it wont follow you or you could use dogs but then you have to attack the mobs before they attack it
What minecraft version are you using?
1.16.201
I have an Xbox it will not go to button mode I can’t use it :(
NICE
When I try to type a dialog it doesn't let me. Is there something I'm missing?
If ur on xbox use a mouse
doesnt work on the server wanted to use it to tell my friend i got him a elytra
Thank You Teacher🤣
I can finally make a wedding system in my smp thank you very much
Hi! I am a little
I got my npc to follow me but every time it walks it spams my chat with commands can you make a vid on how to fix that? If not then I'll look back to see if I made a mistake
“/gamerule commandblockoutput false” should fix that. This stops it from outputting the information into your chat.
@@deesteveng thx a lot
Well I knew that npc before:} But I didn't know how to get moviing ones.
it doesn't work
I Made animal crossing horizons with this thanks
Really needed some help. Doesn't work. execute @e[name=Tyler] ~ ~ ~ tp ^ ^ ^0.80 facing @e[name=Mason,rm=5] i tried this but the npc didn't follow me. Need some help please
Might have become outdated over the versions. I’ll need to try it out again whenever im free
execute @e [name=Alex]~~~tp^^^0.80 facing @e[name=Quincy,rm=5] it works for me
if you wanna spawn a ender dragon in minecraft bedrock type in chat /summon ender_dragon and the ender dragon will spawn
I’m not an old sub I still don’t have memory issues so idk wut u mean dude
It works with command lock to
I used the name for my npc as Mr beast but it didn't work and I used the same command, does this not work any more?!
if your putting spaces you need quotes
@@FirstMC thanks for the help!
RPG server here I come
Let go it work
Didnt work
Could seem to get it to work
bruh i didn't know about this
U have to/gamemode creative @p
Did you use /summon npc
Ofc he did dummy
Dude you have same subs as me
Nice
Well now he has 57 more subs than you
Doesn’t work for ps4
It doesn’t works?
It didn't work for you? Or wut
Dream stan
Its true
Always use /
Hi
Y my name
What?
@@madmaniac6778 her name is emily in the thumbnail and vid it says emily
Oooooooooh I'm dum
you weren't here
Emily Ded
Mcpdl got one call npc expansion
Love it
This isn't working for me, I've troubleshooted it many times but it keeps giving me a syntax error "Unexpected @e: at " execute @e"
I know this is commented very late lol but now for some reason you have to say “execute at @e” and it works for me
I can't press button mode.
Same
This isn’t working for me they keep acting really finicky
It works for me
And it should be/ summon minecraft:npc
or /summon npc
Execute @e[name=ferret]~~~tp^^^0.80 facing[name=TheGamerSiddhan,rm=5]
Gamemode c @p not gamemode c
I need some help is dis tech support?
The agent egg?
agent egg command: /give @p 1 56
agent is invisible because i dont know and if you spawn him somewhere you will cant kill him and build on him
I feel like he had a step that went past his editors eyes in the making of the editing of this vid
/give @a spawn_egg 1 51