I really love kart restoration videos! I own an old kart myself and I learn a lot from these videos! I hope to see more of these in the future. Thank you
Yet another legendary video from the House of Power. Yes... Superkarting is awesome ... everything you mentioned was spot on. Friendly tip... dump the motor and replace it with an RS125 (Honda). Slightly more horses and a ton more reliable. Then it will be time to put some fibreglass on ... 160km/h produces a fair bit of drag...and change the seat to one with a headrest...safety first ! Really love your work !! Well done.
@@PowerRepublic Hey Des, added to Craig's comment, don't forget to add bigger front brakes and short shifter interrupt to the 6 speed RS125 gearbox. Brucie
Road racing karts is pretty popular in the USA as well. It is a total blast. Additionally to CIK sprint karts and Superkarts, we also have specialized road race karts that are more narrow, longer wheel base with a full body. On some tracks, the "laydown" style enduro karts can reach speeds in excess of 150 MPH with the right engine package. Totally sane. ;)
Hey Jar, thanks heaps for tuning in and watching the vid! agreed, it a f n blast. can't wait till she's all fixed up and I can send it again . stay tuned for an update
Hey Derek, I just wanted to say thank you for all of your really helpful Videos! I've got a damaged Kart Chassies for a with many missing parts for about 2 years now. I am an absolut beginner in karting, but today I finally got the Rotax Max running and could do a little test drive. Your videos helped me so much! I'm really hyped for the first trackday. Thanks and greatings from Germany! Keep on Racing!
Hey Kerb, thanks heaps for wathicng all our videos, leaarning the skills and puttiing them to good use !!!! send us some photos of you at your local track !!
Good one Mate. I've had a run in a 125 Superkart at the Mt Cotton Hillclimb track, that was an experience indeed. I've found Autosol on the Axle help maintain them too.
Hi, great videos, have learned alot from you, much appreciated. I was wondering if you have any tips for keeping the tyres cool when the temps come up. I use mxj and can justify mxc money at the moment.
Hey Yo, yeah MXC or low volume MXQ are wicked hot conditions. otherwise make sur you are sriving stright without sliding to avoid overheating the rubber
Back in the late 70's, we raced and changed from gas to methanol/Klotz oil, and seized more damn pistons than there are birds migrating south!!! lol Extremely temperamental between rich and LEAN... :)
The 125 Gearbox class have always been part of Superkarting. The modern KZ engine's have really rejuvenated the class and are making serious HP 52+ which say them hit 200kmh at places like that the Bend
KZ 125s as part of a long track tour/schedule sure. But superkarts are meant to be (or at least were) quite a bit different with 250cc/450cc, rack/pinion steering, longer chassis, full bodywork etc. It’s just a bit weird to me, but I guess the term has superkart has expanded.
@@thiswillprobhrt correct but KZ karts fit the rules and are a great way for people to try Superkarts with their existing karts vs spending $$$ on purpose built Superkarts which is the main point of this video. A KZ kart with standard sprint plastics will never be as fast as a dedicated Superkart but that's not the point. Currently Tim Philp is running a KZ chassis with full bodywork and is very competitive against purpose built Superkart Chassis from Anderson etc.
hmm, think he gears down .... if the carb is lean on the idle jets, this could happen easy... combined with rockie mistake of gearing down to soon heading for corner.... or just being of throttle closed quite a few meters ...
I feel like that engine lock was more about lack of lubrication while downshifting cause the engine still spining very fast and the throttle is close do you run premix fuel/oil or is it automix sistem where you put the oil in a container and the fuel alone in the tank ?
@@PowerRepublic nah I don't think you would forget to put oil , but you know in scooters or 2t bikes we push the clutch and wack the throttle a couple time while downshifting / engine braking to make sure the engine gets lubrication , if you look into heavy tuned 2t bikes you will see they ride like that , but here of course you can't clutch while steering cause of traction loose , so I guess the engine shoud be able to tolerate it or have some kind of lubrication sistem independent from throttle position like a automix
Heya Des, I'm running the same Vortex motor as you, but in open class dirt here in NZ. What jetting are you running? I think the previous owner had it jetted completely wrong, possibly even the wrong needle.
geez, not sure if you want my jetting !!! but I had a 175 to start with and a rich float level. when I leaned it out in float and in main jet to 170, she no likey. do you run a lambda sensor in yours ?
Hahaha, maybe the jetting before you seized! Not running lambda, the only monitoring I have is rpm. Might have to improve that. Initial runs, it wouldn't pull over 5k rpm. After a lot of trial (and errors), got it running better until the big end seized. Jetting is K22 needle on 3rd groove, 168 main, 55 pilot, 60 air, air screw 1 turn out. I still don't think it's right
Cool...but that's NOT a Superkart!! I see they're eligable to race at the club, but the 250 International or Division 1, is what most people would consider a Superkart. Twin cylinder, full bodywork, big wings, big speed etc.
yeah agree, 250cc is definitely a Super Kart. the guys at qld superkarts are trying to get people started by using the 'normal' KZ or gearbox karts for newbies
Well I can say the way you learn is by blowing it up a few times , I know myself when you go that fast in your head your thinking God dam this mite be too fast then after a few times out there you get used to it ( ha ha ha ha I don't think so ) I have a TM 125 shifter and a x30 super 175 and I never get used to going that fast because they are fast
@@PowerRepublic would a BIREL RY28-S9 BARE FRAME work ? R a Birel 09 R30CY Bare Frame Chassis Kart which one would work best ? N thank you for ur response 🙏🏼🙏🏼
@@dirtysock1able all good bro. buying a bare Frame is the most expensive way to get your project moving. maybe wait till you can find a good second hand package and get that, cause there is just som many individual parts you will have to buy
Nyloc nuts!, sorry to tell you, but this is absolutely incorrect. Absolute false information given there. You do NOT need nyloc nuts on your wheels to race a Superkart in Australia. We use lock nuts, these are smaller and you will be able to fit a 10mil socket over them to fit in the rim. a Nyloc is to thick and the size socket you need will not fit in the rim to tighten them up. Other than that, great video.
![ILLSLICK - KILLSHOT REMIX [FULL VERSION]](http://i.ytimg.com/vi/RIK8RrqIAzE/mqdefault.jpg)
Boom! These vids are getting better and better. Slap another up and down thingy in her and send it again!
Yo, yeah its a coming !!!!!! Thanks heaps for watching and sharing the videos
Love this new style of editing! Makes it much easier to follow with the images and the explanations of what you’re doing. Brilliant stuff!
Thanks for the Feedback. My friend Zac King from Zac King Productions is reposible for the awesome new format !!!
www.zackingproductions.com
@@PowerRepublic I’ll be sure to check him out! Keep up the great work guys.
I really love kart restoration videos! I own an old kart myself and I learn a lot from these videos! I hope to see more of these in the future. Thank you
Hey Felipe, thanks so much of tuning in. Ill have to find some more old girls and bring em back from the dead for ya
That was awesome. Great to see you having fun with it Dez!
thanks Adz, you nearly ready for the big come back ??
Yet another legendary video from the House of Power. Yes... Superkarting is awesome ... everything you mentioned was spot on. Friendly tip... dump the motor and replace it with an RS125 (Honda). Slightly more horses and a ton more reliable. Then it will be time to put some fibreglass on ... 160km/h produces a fair bit of drag...and change the seat to one with a headrest...safety first ! Really love your work !! Well done.
Thanks for tuing Big guy !!!!
@@PowerRepublic Hey Des, added to Craig's comment, don't forget to add bigger front brakes and short shifter interrupt to the 6 speed RS125 gearbox. Brucie
Road racing karts is pretty popular in the USA as well. It is a total blast. Additionally to CIK sprint karts and Superkarts, we also have specialized road race karts that are more narrow, longer wheel base with a full body. On some tracks, the "laydown" style enduro karts can reach speeds in excess of 150 MPH with the right engine package. Totally sane. ;)
Hey Jar, thanks heaps for tuning in and watching the vid! agreed, it a f n blast. can't wait till she's all fixed up and I can send it again . stay tuned for an update
Hey Derek, I just wanted to say thank you for all of your really helpful Videos! I've got a damaged Kart Chassies for a with many missing parts for about 2 years now. I am an absolut beginner in karting, but today I finally got the Rotax Max running and could do a little test drive. Your videos helped me so much! I'm really hyped for the first trackday. Thanks and greatings from Germany! Keep on Racing!
Hey Kerb, thanks heaps for wathicng all our videos, leaarning the skills and puttiing them to good use !!!! send us some photos of you at your local track !!
Great video! I really enjoyed watching it and I'm looking forward to seeing more in the future. :)
thanks legend !!!
Love the Fp7 506 nose cone & nassau panel these are the same as i use looks great 👍
yeah bit of a throw back
Good one Mate. I've had a run in a 125 Superkart at the Mt Cotton Hillclimb track, that was an experience indeed. I've found Autosol on the Axle help maintain them too.
hey Burkie, never though oif that, ill give the axle some austosol next time for extrra brling
Thank you sooo much for this video and the differents tips inside!!! Regards
any time legend, thanks for watching
Great vibe as always dez! Nice new graphics too! keep it up mate! 🚀
hahahhah the graffics were my favorite !!! thanks heaps for wathcing and sharing the video !!!!
Another Great vid! I did the Same thing to the Axle on my first used kart, Sandpaper and a Drill! 👍
Hey Reddy, thanks for watching. yeah it definitely speeds up the process !!!!!
Great Video and can only help promote the sport of Superkarts
Thansk timmy, can you share the link on your page for me ??
@@PowerRepublic done, I manage/run the QSC social media pages
Could you make a video about how to mount a go pro or camera to your helmet and how to the just the right pov?
sure can legend, thanks heaps for watching
Hi, great videos, have learned alot from you, much appreciated. I was wondering if you have any tips for keeping the tyres cool when the temps come up. I use mxj and can justify mxc money at the moment.
Hey Yo, yeah MXC or low volume MXQ are wicked hot conditions. otherwise make sur you are sriving stright without sliding to avoid overheating the rubber
hey Dez. love the vids. 👍
wheres best place to by a dial indicator. ???
dpe ikd n mkc have none
www.ebay.com.au/itm/225351231530?chn=ps&_ul=AU&_trkparms=ispr%3D1&amdata=enc%3A1KIJrLti7TJm4CKGBgN3r9A88&norover=1&mkevt=1&mkrid=705-139619-5960-0&mkcid=2&mkscid=101&itemid=225351231530&targetid=&device=c&mktype=pla&googleloc=9069123&poi=&campaignid=15984321586&mkgroupid=&rlsatarget=&abcId=9300814&merchantid=7364522&gclid=Cj0KCQjwu-KiBhCsARIsAPztUF129IK84W6VsX9TSxvKNgyTReK9DftMAEnPCn4fOYpSD4xr81AenowaAqIeEALw_wcB
Back in the late 70's, we raced and changed from gas to methanol/Klotz oil, and seized more damn pistons than there are birds migrating south!!! lol Extremely temperamental between rich and LEAN... :)
yeah a cost of business as they say lol
Love the vid but when did 125's start getting called superkarts?
Exactly… I was hoping to see a real Superkart.
The 125 Gearbox class have always been part of Superkarting. The modern KZ engine's have really rejuvenated the class and are making serious HP 52+ which say them hit 200kmh at places like that the Bend
next time, the boys promised me a shot in the 250cc International. SHould hit 220kph plus in that bad boy !!!
KZ 125s as part of a long track tour/schedule sure. But superkarts are meant to be (or at least were) quite a bit different with 250cc/450cc, rack/pinion steering, longer chassis, full bodywork etc.
It’s just a bit weird to me, but I guess the term has superkart has expanded.
@@thiswillprobhrt correct but KZ karts fit the rules and are a great way for people to try Superkarts with their existing karts vs spending $$$ on purpose built Superkarts which is the main point of this video. A KZ kart with standard sprint plastics will never be as fast as a dedicated Superkart but that's not the point. Currently Tim Philp is running a KZ chassis with full bodywork and is very competitive against purpose built Superkart Chassis from Anderson etc.
Do you know, what exhaust gas temperauture should rotax max senior have?
Hey Jan, nah i havent used them a lot. t
Lambda is best IMO
Wow this video was awesome I'm thinking about getting a KZ
do it, so much fun !!! thanks heaps for tuning in and watching the vids
Hahaha I had MacGyver in my video too👍🏽👊🏽
the OG BOSS ! !!
have a go of a 250 twin
next time www.qldsuperkart.org are taking us out in the big dog !!!!
I’m looking for vids about what grade tyre to use /when and when to change as they are dead.
what class are you in ?
@@PowerRepublic arrow x4 senior IAME x30, Sydney weather 😙
Just purchased it at Christmas time.
hmm, think he gears down .... if the carb is lean on the idle jets, this could happen easy... combined with rockie mistake of gearing down to soon heading for corner.... or just being of throttle closed quite a few meters ...
yeah i'm blaming the driver too hahaha, but nah it was my fault, i changed the carby too much and she was lean AF
I feel like that engine lock was more about lack of lubrication while downshifting cause the engine still spining very fast and the throttle is close do you run premix fuel/oil or is it automix sistem where you put the oil in a container and the fuel alone in the tank ?
yeah not sure, maybe I forgot to mix the oil in the fuel. it doesn't use a oiler system, only pre mix
@@PowerRepublic nah I don't think you would forget to put oil , but you know in scooters or 2t bikes we push the clutch and wack the throttle a couple time while downshifting / engine braking to make sure the engine gets lubrication , if you look into heavy tuned 2t bikes you will see they ride like that , but here of course you can't clutch while steering cause of traction loose , so I guess the engine shoud be able to tolerate it or have some kind of lubrication sistem independent from throttle position like a automix
Heya Des, I'm running the same Vortex motor as you, but in open class dirt here in NZ. What jetting are you running? I think the previous owner had it jetted completely wrong, possibly even the wrong needle.
geez, not sure if you want my jetting !!! but I had a 175 to start with and a rich float level. when I leaned it out in float and in main jet to 170, she no likey. do you run a lambda sensor in yours ?
Hahaha, maybe the jetting before you seized! Not running lambda, the only monitoring I have is rpm. Might have to improve that. Initial runs, it wouldn't pull over 5k rpm. After a lot of trial (and errors), got it running better until the big end seized.
Jetting is K22 needle on 3rd groove, 168 main, 55 pilot, 60 air, air screw 1 turn out. I still don't think it's right
What engine is this, and what’s the reason for 1mm before tdc? This sounds like very little, can you explain this?
It’s a TM and the reason for retarded timing is that the straights are mega long and the pistons melt away as they get too hot 🥵
What kind of helmet is zac wearing at the end? Black one
not sure, I will check for you
Its the RXT Missile Full Face helmet :)
Cool...but that's NOT a Superkart!! I see they're eligable to race at the club, but the 250 International or Division 1, is what most people would consider a Superkart. Twin cylinder, full bodywork, big wings, big speed etc.
yeah agree, 250cc is definitely a Super Kart. the guys at qld superkarts are trying to get people started by using the 'normal' KZ or gearbox karts for newbies
Well I can say the way you learn is by blowing it up a few times , I know myself when you go that fast in your head your thinking God dam this mite be too fast then after a few times out there you get used to it ( ha ha ha ha I don't think so ) I have a TM 125 shifter and a x30 super 175 and I never get used to going that fast because they are fast
yeah they are pretty quick !!!!!!
@@PowerRepublic do you know what the temperature was when it burned up ?
How were you able to pick up a kz package for $2k?
No motor
Wat frame u using ? Wat frame can i use for a adult ? I'm tryin to build one too ... plz help r make a videos about it .... 🙏🏼🙏🏼
Bro, she's an older PCR brand KZ chassis from Italy. Handles like every other go kart really, super fun !!!
@@PowerRepublic would a BIREL RY28-S9 BARE FRAME work ? R a Birel 09 R30CY Bare Frame Chassis Kart which one would work best ? N thank you for ur response 🙏🏼🙏🏼
@@dirtysock1able all good bro. buying a bare Frame is the most expensive way to get your project moving. maybe wait till you can find a good second hand package and get that, cause there is just som many individual parts you will have to buy
@@PowerRepublic okkkk thank you !! I do that n just wait then
@@PowerRepublic n those frame i send u r use for 400 US dollar too ...
I wish I could afford one
keep saving, its mad fun
wd40 is not a lubricant its a solvent
Nyloc nuts!, sorry to tell you, but this is absolutely incorrect. Absolute false information given there. You do NOT need nyloc nuts on your wheels to race a Superkart in Australia. We use lock nuts, these are smaller and you will be able to fit a 10mil socket over them to fit in the rim. a Nyloc is to thick and the size socket you need will not fit in the rim to tighten them up. Other than that, great video.
There are other nyloc nuts of the same size that don't have this issue
fair enough, so any locking nut is fine for SKA ?
@@PowerRepublic yes, standard kart locking nuts are fine.
The music junked another video 👎👎👎👎👎👎💩💩💩😬
thanks for watching