Thank you so much for these instructions. We did it! It took us a bit longer than the 5 minutes allocated (times ten), but from your instructions we could tell exactly where things were not going according to plan (There was much more glue and Styrofoam than we expected, and we're not experts, like Jason)
Shame I did not see this before I ordered a new seal and the screw kit from the official liebherr parts place in Australia. The charged $56 for 30 screws. $55 for the seal. Worst, I order a new draw rail $96 (just one) Not worth more than $20 for a pair. I decided not to change the seal on the freezer door at the time, but asked it was over $200 for that seal, and it half the size of the other.
Hi Chris, We use screws because its a more permanent solution. The tape works its just not as good (in my opinion), the tape is much easier though and not all customers will have a drill. I've used tape in the past and had to go back to the job and install screws so we use screws for everything.
Thank you so much for these instructions. We did it! It took us a bit longer than the 5 minutes allocated (times ten), but from your instructions we could tell exactly where things were not going according to plan (There was much more glue and Styrofoam than we expected, and we're not experts, like Jason)
Сool, everything is simple and clear. Thanks for the nice review
Thank you
Shame I did not see this before I ordered a new seal and the screw kit from the official liebherr parts place in Australia. The charged $56 for 30 screws. $55 for the seal. Worst, I order a new draw rail $96 (just one) Not worth more than $20 for a pair. I decided not to change the seal on the freezer door at the time, but asked it was over $200 for that seal, and it half the size of the other.
Thank you !
Great video (long!) thanks. Not totally on board with drilling into the fridge door, why don't you glue the seal back in like the old one was?
Hola, me puedes decir si ese sitema es el del modelo liebherr CNPESF4013 ? si no es, que sistema seria? Gracias
Many thanks for a great video! How long were the self tappers you used? About 12mm?
Roughly 15mm but 12mm should work fine.
@@FridgeSeal thank you. I used 15mm M3. They worked fine but M4 would've been better. Main thing is fridge door seals now!
We used a mixture of 15mm and 12mm, and the 12s seemed a bit small. Lots of free play once they were in, whereas the 15mm bit in and pulled tight.
@@Sacha00Z Great Feedback! thank you Sacha - appreciate it.
Hi, I see you use screws vs the recommended Liebherr double sided tape kit, why do you prefer that method?
Hi Chris, We use screws because its a more permanent solution. The tape works its just not as good (in my opinion), the tape is much easier though and not all customers will have a drill. I've used tape in the past and had to go back to the job and install screws so we use screws for everything.
@@FridgeSeal Thanks. The $100 Can for double-sided tape seems a bit excessive. lol.
Do you have a video on how to fix leibeherr door handles?
Sorry we only do fridge door seals. i believe there is a hiden screw underneath the handle to remove it though. Goodluck
@@FridgeSeal thanks for taking the time to reply. I’ll look for that hidden screw
thanks but this format is unsuitable..
if still trying to find right video, search DSU liebherr. this is the other type.
Fuck liebherr...