Don't forget to SUBSCRIBE for regular 'Essential RC' action using this link th-cam.com/users/EssentialRC Please SUPPORT 'Essential RC' and JOIN HERE th-cam.com/users/EssentialRCjoin for EARLY ACCESS to NEW videos
that was amazing,and the idea to get little airfix model and upscale very clever builder lots of skill involved ,,great camera work loved this video👏👏👍
So with an afterburner the exhaust only touches the nozzle, but no blades. So there is less surface which needs to be cooled. For some reason model jets don't even cool vanes or blades. Anyway, I always fear that pressure behind the turbine is bigger than on the intake of the plane and would backfire. Wouldn't it be safer to have an electric centrifugal compressor to blow cooling air through small holes into a cooling fin of the afterburner combustion chamber? You know, without an afterburner, velocity of the exhaust stays high and pressure low. After burner has a diffusor to max pressure for efficiency and to avoid flame out. Sure need high pressure. Bleeding air from compressor may be too high though. I thought, we keep the hot end of a turbine simple because the materials are so expensive to weld. So I am looking forward to this project.
Beautiful DIY build...and that was an extremely short take off distance for a jet.. Looks like it could do with some more setup tuning to make it a bit more stable but congrats to the builder and pilot. Great job!
Nice scratch built phantom, looks to me it's a bit tail heavy , the nose gear popping up on take off. I had a phantom 1-10 scale, Loved it & could slow it down on the approach, back off the throttle a bit and let it sink down in on its own. Would it be possible to get a copy of the plans?
Not if it's balanced properly with appropriate weight like batteries at the front...which it is. Looks great in the air. Don't understand what you are talking about!?
Add a Motionsic head tracker gimbal and digital FPV, imagine the havoc you could stir up with that model! Chase off the worst element of the GA crowd that like to ignore the 500 foot deck and low pass over RC model events.
I use a Medlin headtracker. Based on same thing. I don't see any folks adding FPV into turbines but I've just put it into my UltraFlash and will be flying that very soon
@@EssentialRC There's quite a few FPV gas turbine videos, and some wicked looking FPV gas turbine Heli videos. Mind you, every time they re-jig search, it gets harder to find anything we look for, especially with all the 'sponsored' search results!
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค2]](http://i.ytimg.com/vi/pZbsSDRrmXA/mqdefault.jpg)
Don't forget to SUBSCRIBE for regular 'Essential RC' action using this link th-cam.com/users/EssentialRC
Please SUPPORT 'Essential RC' and JOIN HERE th-cam.com/users/EssentialRCjoin for EARLY ACCESS to NEW videos
Watch Dr Zakir Naik’s videos :)
Wow perfect scratch build, Heart went into my mouth on the landing. Orsum Jet, a favourite of mine 👍🏻
That guy is a phenomenal rc modeller.
Yup
The build is so clean, amazing craftsmanship.
Labor of love..Congrats!
looks great, sounds even better and is flow perfectly. Javad is a badass
Couldn't agree more!
Beautiful plane
FANTASTIC!!! Thank you for sharing this exquisite build Dom!!
No problem 👍
that was amazing,and the idea to get little airfix model and upscale very clever builder lots of skill involved ,,great camera work loved this video👏👏👍
Thank you very much!
WOW what a GREAT built jet. AMAZING build the builder/owner should be VERY PROUD 🇬🇧👍✌️
beautiful!
That’s a beautiful airplane!
This is awesome I’m making my own rc turbine afterburners and I’m making an f4 phantom right now what a coincidence
So with an afterburner the exhaust only touches the nozzle, but no blades. So there is less surface which needs to be cooled. For some reason model jets don't even cool vanes or blades. Anyway, I always fear that pressure behind the turbine is bigger than on the intake of the plane and would backfire. Wouldn't it be safer to have an electric centrifugal compressor to blow cooling air through small holes into a cooling fin of the afterburner combustion chamber? You know, without an afterburner, velocity of the exhaust stays high and pressure low. After burner has a diffusor to max pressure for efficiency and to avoid flame out. Sure need high pressure. Bleeding air from compressor may be too high though. I thought, we keep the hot end of a turbine simple because the materials are so expensive to weld. So I am looking forward to this project.
Fantastic Aircraft!!!
Now what is needed is the boundary layer control shriek at landing !
Beautiful
Wonderful and brilliant scratch build👍👍👍..just saw the wind and thought 😱, but he did a great landing 👏
Never been an F-4 fan, but this is awesome!
same here never did like the f4's ... as an RC plane looks and sounds amazing ... as a fighter jet ... not so impressed ...
Nice job
Thank you! Cheers!
Beautiful DIY build...and that was an extremely short take off distance for a jet.. Looks like it could do with some more setup tuning to make it a bit more stable but congrats to the builder and pilot. Great job!
Full balsa RC plane
Yuo are the master
Nice landing 😂
Awesome plane, nicely done. Are there any plans available for this model?
Not that I know of. His build thread is on RCUniverse.com
@@EssentialRC found it, thank you.
😂😂😂Bless him he did a wonderful job, phantoms are definitely difficult to fly well, racey landing though 😬
Awesome 👏 this is one of my favorite planes ✈️
Mine too!
Good
Nice scratch built phantom, looks to me it's a bit tail heavy , the nose gear popping up on take off. I had a phantom 1-10 scale, Loved it & could slow it down on the approach, back off the throttle a bit and let it sink down in on its own.
Would it be possible to get a copy of the plans?
I wish there were more EDF, Ready to Fly Fighter jet 🛩 toys instead of just helicopters 🚁
Look on www.motionrc.com/ and you will find several.
Beautiful, twin engine seems more tail heavy.
Not if it's balanced properly with appropriate weight like batteries at the front...which it is. Looks great in the air. Don't understand what you are talking about!?
Is there a build video or pictures?
Looks like balsa isn't dead yet!
Well done on a great project.
Build thread on rcuniverse.com
Add a Motionsic head tracker gimbal and digital FPV, imagine the havoc you could stir up with that model! Chase off the worst element of the GA crowd that like to ignore the 500 foot deck and low pass over RC model events.
I use a Medlin headtracker. Based on same thing. I don't see any folks adding FPV into turbines but I've just put it into my UltraFlash and will be flying that very soon
@@EssentialRC There's quite a few FPV gas turbine videos, and some wicked looking FPV gas turbine Heli videos. Mind you, every time they re-jig search, it gets harder to find anything we look for, especially with all the 'sponsored' search results!
Sell to me. beautiful jet.
Eh, I really don't think so. 😄
Lmkq
Fraudemic.