Great video, just a few pointers for anyone looking to get the MHI AC: 1. Most important - Vacuum your copper lines before you cycle the gas in the system for the first time. The vacuum pump is to be connected to the lines and run for 20-25 mins, until the pressure shows zero on the pressure meter - hold this vacuum for 20 mins to ensure that there is no leak in the line. - almost 99% of all Residential AC Installation personnel skip this most crucial step. 2. Use high quality copper for the high pressure lines - the ones with smaller diameter - Mandev and not cheaper unbranded copper 3. PCB drives fail on all machines - even the most robust TRANE, Daikin, BlueStar etc. try not to run the machine more than 12-14 hours a day if your cooling load is really high - i.e. compressor is running continuously at peak performance - measure with ammeter 4. Size AC as per cooling needs - inverter ACs are not ideal where there is a very high cooling load due to ambient and external factors - like lots of glass area, or the room is on the top floor etc. Provision for the extra cooling capacity ideally.
So will a 1 ton inverter ac work for a 100 sqft, sealed but not insulated with direct sunlight coming from two sides and the roof the majority of the day?
Your reviews are helpful and honest. Calm voice and good grammar are music to the ear. A welcome change from the 1001 other channels that call every other ac "best" and just want you to use their affiliate links.
Dear Sir, your candour and clinically thorough assessment of this otherwise very good offering made for sound viewing. Your honesty in sharing your disappointing coupled with your fair assessment have helped me immensely in decision-making on ACs as well. Keep your videos coming. At the end of the day it seems as if there are some loose ends in the MHI way of addressing matters that seem to undercut its own commitment to engineering excellence.
It is sad to see such a wonderful product being handled like this however considering performance of other air conditioners, options are limited..if service is good , product is average.. hope MHI improve their service and start taking ownership of faults instead of playing blame game..all things apart , excellent video and articulation is top notch.
I am also experiencing something along these lines. I had bought 3 ton MHI inverter ACs. One of them jas stopped cooling. When contacted the dealer, he didn't respond for 2 days as he said he had no staff. When finally the staff arrived, he didn't even care to touch the AC and said that the cooling coil is gone and it will cost ke like 20k, with no warranty of functioning. He also said that his boss is a scammer and he personally threw away like 5 ACs this week because "MHI has this problem and is a shit product" he said. Then this worker went on to say me that I should buy a different AC from the firm he has already set up 😂. Idk what to do, I'll probably have to bring a non official expert to check out the problem. That dude literally told me to put my AC in trash 🗑️ I personally think the lack of refrigerant is the problem. This video has me convinced that I should get a second person to do this. It's a shame really
Never buy brands which depend on local harami dealers for service. That's why I always buy LG or Daikin which have a good market share and network. Anyways, do check your AC with an independent technician, it's probably a gas leak in the pipe.
@@Chopper153 Daikin having it for last 10 years they use 3rd part service center too and provide 0 warranty on any parts currently the guy is saying coil i gone on my 3 yr old unit and replacement is 9k without warranty not acceptable. Daikin Technicians are not trained and awaful.
I’ve got 4 Mhi acs oldest being from 2010 and youngest from 2018 no leaks. Oldest one only recently gave an issue. Their service network has gotten terrible they assign techs which have no training or diagnosis method just go by what they feel. Misplace screws chop wires to remove things etc. I have been doing the cleaning etc myself as most of these services folks always ruin things it misplace screws and then ask you to pay to make it right.
At 3.5 seconds you can clearly see that it's cooling capacity is 7100 watt not 7700 watts..and power consumption is also high as per brosher..plus this ac consume 2500 watt of power but they have written 1840 watts max
That is really concerning, I was very keen on the MHI however now watching your experience and this low quality service I will have to think about an alternative. thank you for sharing.
@@jacobfamilyyoutubechannel2937 for that you’ve to get knowledge about HVAC and keep an eye on technicians when they work at your home and correct them and get your work done properly. They fool people who don’t have knowledge but who have knowledge are treated good by the technicians.
No matter which brand you buy, it's the service which makes you cry. I live in a small city and struggling to get my Hitachi Inverter issue diagnosed. I would not recommend buying an inverter ac.
Yes, we’ve just had Mitsubishi air conditioning installed and they said they shouldn’t be against the ceiling. Ours have a gap of approximately 5cm or just over 2 inches.
Please suggest whether rubber pads are required to be placed below the four legs of the outdoor unit while installing it on wall mounting brackets to avoid any vibrations. Will they come along with ODU package?
Experience same actually you have won experienced technician/engineer that you buy this Aircon my personal experience last 4 years about iapl group they only focus on sales not after sales service no doubt machine is too good but installation most important in ac and the air condition never run out of gas exception pipe leakage etc please contact best won technician ialp group only provide 3rd party service local technician
One of the main reason people are skeptical about buying Mitsubishi products is their poor after-sales service. Rather buy an inferior product comparatively with great service
This is the problem with every company in India.. SHODDY Technicians who first do not install the AC with proper care & leave important steps. Then if there is a problem then mishandle the issue & the product itself like its trash & has no value.... They do not care how you spent your hard earned money to get a good product which is priced at a premium compared to other brands.... Then the common thread is they badmouth inverter AC's & still want customers to buy non inverters only. The world has moved on to Inverter AC's but these people refuse to learn & move o this new technology which is now almost over a decade old in India. Had this experience with ~5-6 AC' techs & authorized Daikin technicians as well.... The inverter AC has more electronic components & sensors for the working of the AC for which they need to learn how to find faults using Ampere meter & multi meter on the PCB to pinpoint the specific component which is not working but they simply have one response for every electronic problem.. PCB is gone & need replacement. Maybe its a scam run by the companies to get more money from customers but this is only an assumption on my part. Maybe these technicians are so lazy that they refuse to learn & move on to Inverter AC's repair properly & will continue to do so for the next 5 10 years till the companies are forced to stop making Non Inverter AC's in India by BEE...
I got the installation done by our personal technician who has been serving the top clients in our city since many years and rather than getting it installed by dealers technicians and my dealer was Eco cool and he has monopoly of selling MHI acs here in Ghaziabad and service provided by them is worst I have seen so far.
After gas did it work well ? It is both dealer and the company fault for employee technicians who are scandalous to extract more money from the customer.
Does ur room ceiling get's direct sunlight?...i see u have false ceiling done..is there any insulation done under the false ceiling like glass wool etc?
IAPL group is basically an importer with no technical expertise. This is bad enough but God help you if you need a replacement part given that MHI AC division is not present in India.If you insist on buying Mitsubishi I think Mitsubishi Electric is a much better buy at least you get Mitsubishi Group warranty and authorized service.
That is not the case. I have both ACs installed at my home. Mitsubishi Electric has also outsourced it’s installation to third party. It is pretty much upto the installer on what quality of service it intends to provide whilst try to find the balance between workload and manpower. Overall, I am satisfied with both the installations. MHI (non inverter) AC have higher air flow, slightly lower power consumption and higher capacity compressor. Hence, the slight premium over ME. If you have a service center in your city, do visit them and they’ll clear all your doubts regarding MHI ac. If you don’t have MHI service center, go for ME. Even OGeneral’s service reputation isn’t great at many places. It’s hit or miss.
Mhi is not registered in india as a company.. Mitsubishi electric can provide u replacement if unit is faulty where as mhi can't...i have both electric msgk18va and mhi srk20css 1.6 ton..my mhi compressor went faulty within 3 months...iapl is agreeing to change compressor and not whole unit...
Great review. I went with Panasonic CS/CU-QU26ZKYF which has been working well. 2.2 ton (convertible) for 65K including Installation with almost similar specs of the MHI you reviewed.
@@dibyadishdas1551 Cooling is good, room is around 450 sqft. Once cooled, average power draw is around 2 amps. During initial cooling phase, it goes to 7 amps at nominal capacity. Outdoor Unit is under a shade.
Do Panasonic provide 3mtr copper pipes with the AC boxes . Their website doesn't mention that . And some owners on TH-cam & Amazon reviews have said they had to pay extra for pipes as their Panasonic ac didn't come with copper pipes
Feel sorry for your bad experience my friend. But a product this experience MUST provide top quality pipings to ensure longevity and performance and not leave it to the choice of these shady so called technicians to pick some random cheap pipe quality which is not going to be the best ones as they would want to eat some money there too. And this is now obvious from the leaks in just one year. You must have thrown that crappy pipes atleast now and gone for new high quality ones to ensure pain free operations as everytime you need to shell out for labour and gas charging too.
Every brand have PCB problem in inverter AC and low cooling problem are just too common with inverter AC. I got this AC in non inv model and man it’s perfect in chilling and service part we can’t do anything every brand have 3 rd party service is SSDs so it’s more or less same in terms of quality. I myself saw service of MHI O General Voltas Daikin and LG in all of them LG technician are always more oriented for customer satisfaction for other brands it’s your lick like I got bad technician for Voltas and daikin but Okok for O General whereas MHI technician which I got is really knowledgeable cuz he works with these MHI ACs in commercial spaces and learnt a lot to handle pipes in long running length and AC technically too.
The model you mention is from a different company, Mitsubishi Electric. It is also a very good option and perhaps just as good as the MHI. It has a lower ISEER rating though, meaning slightly more power consumption. Hope this helps.
It's a good model. But make sure your dealer is trustworthy. Everything depends on the quality of installation as the machines themselves are top notch.
Hello there, I am planning to get two of these Air conditioner for my shop, I want to ask you about it's cooling, is it up to the mark, and how much energy it consumes., And do you think Mitsubishi heavy ac an good option.?
@@Ayan9gaming Top floor or bottom floor doesn't determine what kind of AC to buy. If your AC is used for more than 8 hours a day (like a bedroom), get inverter. Else fixed speed is better.
im using the same machine coincidentally i got this machine at the same time when Ashish bhai got his ... as i was searching about this machine in youtube i came to know about his channel with his Mitsubishi AC video last year as of now no issues did my 1st service in my home town there is no Mitsubishi Service i did the 1st service with the local technician i used mandev pipes even though its not available in my home town i made it (mandev pipes) to get from hyderabad during the installation by the god grace no issues as of now machine quality is very good even i found no issues in Ashish bhai's machine too in this video apart from gas and pipe issues it seems initially there was no proper installation that's it i.e., pipes... i think his machine is also working great... happily you can consider MHI Machines even Ashish bhai saying you can consider MHI...
Why is My Mitsubishi spitting mud like water or dirt stains out of My AC. No matter how much I clean it or service it. I've hardly bought Mitsubishi slim model few months back maybe 4. And they suck at service. They said it's because of dirt which i can't believe. They cleaned the whole thing although they are irresponsible and rough but again within few weeks it's spewing out same dirt filled spots . What to do kindly help. No matter how much i complaint them they do nothing except coming and putting some n cleaning it just to happen the same
Hardware wise the MHI is in a different league, much better than the LG. However LG provides piping with the AC and have company technicians install everything. LG 2 Ton ACs are only 3 star and they don’t go bigger than 2 ton. In terms of inverter and non inverter, I prefer inverter ACs for their much lower consumption and slow spooling compressors. A large number of people have warned that they can suffer PCB issues. Between my 4 inverter ACs (LG, Panasonic, MHI) none has had that thankfully as yet. So my recommendation would be as follows: if the AC needs to operate in very harsh conditions and high temperatures, go with the MHI, if the area is not that large and is not directly exposed to the sun, go with the LG. Hope this helps.
Lg provides 10 feet copper pipe which are not pure copper Some other material are used. But Mitsubishi will not provide But the installation man will bring the pure copper pipe
I bought a Mitsubishi Mr Slim AC unit 23K BTU last summer. Less than 11 months later it died. I called the installer who explained that if he took it apart, it would void the warranty, so I called Mitsubishi. Three weeks later and they are still "waiting for parts." I live in Thailand and the peak of hot season 43C+ this year was spent with no AC in my living room/lounge. I am not happy and will never buy another Mitsubishi product as long as I live. They are very happy to sell products, but infuriatingly slow about honoring their warranties. Unacceptable.
Most technicians advice to stay away from inverter acs cause of few reasons. Pcbs are more on inverter acs all inverter acs which ever brand has two or more pcbs. Old school acs also used pcbs but inverters have more microcontrollers and require more knowledge to repair. Most of these techs are untrained to follow procedure. When regasing you need to remove all the gas, add nitrogen and do a leak test then pull a deep Vacuum and monitor for vacuum drop which can show leakage. You also need to add the gas only by weight which none of them do and they always use pressure method some may say 120 some 140 some even less it’s hard to get the right pressure in any mini split more so inverter. They find it will give an issue and always blame inverter ac. Brazing they should’ve cleaned the copper portion before brazing else that weld will come off later. They do not follow the Torque spec for tightening the flare (pipe connection) plus they also use Teflon tape which many manufacturers say never use. Most of these techs also ruin the ac. I’ve got about 4 Mhi acs inverter and non inverter. The oldest one is an inverter and after about 14/15 years gave its first issue.
Love the MHI, but I faced the same challenge, took them 6 hours to install a split unit. Then indoor drain pipe was leaking, again the next day they had to send someone n fix it…
@@TechnologyRig though i really liked your emphasis on engineering quality of MHI ACs the service component is a huge wild card ... And if the installation and design of PCBs is another weak link then to my mind they can potentially negate the high quality engineering.... Overall the burden lands on the customer's head and wallet.
@@jacobfamilyyoutubechannel2937 the quality is good can vouch for it. Have mine since 2010 srk71 only recently there’s a major fault worked problem free all these years. I myself used to clean them as the dealers are terrible and don’t take care of the unit. The weakest link is the service dealers most of them won’t install as per guides won’t vacuum will not charge the ac as per weight but just use pressure and go. And definitely never uses nitrogen when leak checking
After watching the three months review of the same AC of this video, I decided to go with Inverter AC myself (SRK18 YSX2-W6). Now that you have had the bad experience, makes me wonder if I should buy it! And No I will not go with any inverter AC of any other brands other than MHI. I want to either go non-inverter or the interested model mentioned. Any thoughts?
Like I said in the video, this is just my personal experience at the one-year mark. This does not necessarily represent everyone’s experience. And the part that failed was not provided by Mitsubishi, the piping, which was supplied by the dealer. So the hardware itself is solid, you must ensure that the installation is 100%. Unfortunately or fortunately I report about products as I experience them, without any filters. So yes I would still recommend MHI.
@@TechnologyRig Oh! That clarifies. The parts that faulted was not provided by Mitsubishi. BDW, your vocabulary and accent is really elegant and fantastic. Any suggestions on how to improve mine like yours?
@@Mr-Royn i have also buy the model (SRK18YXS2-W6) and installed this week, after watching the review am having some feeling arises in my gut but touch wood everything is fine till. There is an important thing i came to know that you have to register for your AMC for PCB and Compressor if the ac is installed by the dealer of your area but you have purchased it from the some other dealer. this is the case happening to me now.
Don't buy it they are liars srk18yxs2 ki cooling capacity 5600 watt hai aur jhooth bolke 5825 bta re brosher me .ac ki unit pe 5600 watt likha power consumption bhi bhut zyada hai..naa koi pcb shock proof hai
My father also gave me the task to buy the ac for the room.....Money eas not the problem.....I also loved mitsubishi ac......I also thought of buying mitsubishi ac....but however before buying any electrical equipment ,I have a habit of checking the service centre and the distance of the service centre from my location...in which the mitsubishi failed...that changed my decision.....
Told you before they are liars..actual cooling capacity on ac unit is 7100 jbki brosher pe yeh 7700 likhte hain dhokha dene ke liye..power consumption bhi zyada hoti..never buy this..only .non inverter models were good
Hi Sir, This is J. Durga Prasad from Hyderabad. Recently I have purchased Mitsubishi Heavy Industries 1.3 TR Split AC 3 Star Non-Inverter Hybrid Model No: SRK15CXS-W6 for my living room in my Apartment flat. Five days back it was installed and is working fine. Now I would like to register the product with IAPL group as a part of warranty policy. In the blank warranty card which came along with AC packing, there is a column regarding "Compressor Number" in addition to Serial Nos and Model Nos of IDU & ODU. I could not able to find out "Compressor Number" on ODU Serial Number plate. Kindly guide me in this regard. Thank you.
Has the registration been done ? I had purchased srk20css non inverter 14 days back and when I called their customer care they said no registration is required for non inverter Acs. Please respond and clarify.
@@harikriz7 I have completed product registration by sending scanned copies of all relevant documents to IAPL through email for my Non-Inverter AC as well.
No wonder mitsubishi motors was shut down bcoz of poor after sales support. I have suffered with my lancer lxd. I have a lg gold model window ac 1.5 ton and it has never ran out of gas after me using it for 25 years.
I faced Similar issues when the technician blew up my motherboard and blamed it on me, while i saw the whole thing, my only fault was that i did not record every step they did, and they did poor quality jugad to make it work, sorted the fuse with the wire which blew out the board. Service totally denied to pay the cost and also had the audacity to say we will take the AC with us, to which i replied let me call the police, and only then they were scared. in the end I had to shell out 8000 rupees for new motherboard.
Split acs are nothing but permanent recipe for disaster. No matter what you do the reliability of these machines are very low. Window ac has no substitute till date . Flawless performance, rock solid reliability, no freebies but pure performance.
I'm having mhi 1.6 ton split AC with R32 gas, installed one year above, if i sleep in the ac next day i can't open my eyes, it's full of irritation and dryness,even i tried different temp settings, still same issue,i suspect the gas r32 ,, anyone facing the same issue with mhi
It’s impossible for gas to mix with air, especially everyday. It takes a few seconds for the gas to leak out and then the AC will not cool. I think perhaps your issue is related to dry air directed towards your face… which may cause dryness in the eyes?
It is always better to buy a fixed speed non inverter AC which is actually comparable to a 3 star AC. These are robust .There are no hassles and have a solid life. the service and spare parts costs are very low. It is better to actually buy 2nos. Of 1 ton non inverter ACs instead of a single 2 ton inverter AC. The evaporator and condenser sizes do not scale linearly with capacity in a 2 ton AC. So having 2nos. 1 ton AC is much better as the surface area of evaporator and condenser is much much higher . This itself would give higher efficiency.
@@aaryan27 yes but cooling capacity will be higher than 2 ton AC and it will not run long enough to cool the room so eventually power consumption reduces in the long run. Most ACs don't run at full capacity one the room cools.
If you have higher usage of more than 1600 hrs a year then you should go for Inverter AC only under residential use with proper sealed rooms. Above 2500 hrs usage every year you should go for 5 star Inverter with the best ISEER you can afford....
Get the most efficient AC in 1.95 ton with 4.2* rating - mhi. 25cwx-s6. I have it and it is pulling only 1475 watts at nights. In hot summers goes to like 1600w to 1700w. *Non inverter*
That's not in my case with my DAIKIN inverter ac and I got my all problems solved with zero Cost they have trained authorised persons and solved my pcb under warranty. Daikin has More practical and Much more stronger network than all Ac companies in india. Mitsubishi ac are good no dought but it requires properly trained technicians or it will spoil your hard earned money. Go with Ac Which make more sense in comparison with this so called heavy duty acs. Daikin Have robust cooling and Power saving with Good service as well. Mitsubishi ac are hard to maintain with their pethetic service network and overpriced expensive parts
Same experience here. LG and Daikin have good services in my area. Also I'm usually very strict during installation and make sure proper procedures are followed. So far in 3 split ACs, no gas leak has occurred due to good installation.
Yeh mitsubishi heavy waale liars hain..na koi inki ye star ratings shi hai..mai guarante dene ko tyar hoon agr ye ac 5 plus iseer ka ho...brosher me 7700 cooling capacity likhi jabki agr ac ki unit ke upar dekhoge to 7100 hi hai aur power consumption bhi bhut zyada hai...same with other inverter models
idk but ac quality now is downgraded i feel,and easy to leak on evaporator,they put more thinner copper materials on evaporator to cut cost,the ac will not last 1-2 years in coastal area without rust undercoat or 3-5 years in normal area,atleast only one brand i trust on my country is Gree,the materials i checked is far more good than others comparing big brand like panasonic or daikin they had less copper materials and i heard many case the expensive daikin the evap easy broke down only 2 last years (installation follow right procedure,vaccum 15-20 min before pump refrigerant to system and using 0.8 pipe installation)...
Nope.. I am suffering with DAIKIN parts failing every year. Something fails every ow or then even though I've used it with V-Guard Stabilizer from day one & have a three phase connection with proper voltage.. Mine is their JTKM 5 star 1.5 ton AC which is their top of the line product, Its utter crap. So far have changed 1) Blower motor (Bearing started making noise after 1.5 years) 2) Remote receiver from indoor unit stopped working (Replaced Last year) 3) Vane motor started making tic tic noise this year when its flaps are opening or set in vertical motion 4) Compressor now getting switched off after 5-8 mins of operation. Been waiting for parts since 28th Apr 2022 & still its not available. For the last complaint technician told that Gas is leaked, F3 error code came, after recharging he says sensor is not working & maybe PCB is gone... AC is 4.5 years old.... All repair done by DAIKIN only....
@@HailStonE999 v guard stabilizers are horrible they have aluminium instead of copper windings and overall poor quality.My brand new Daikin ac had unacceptably high noise in its first year,I changed the stabilizer to bluebird and the problem miraculously disappeared!
lol daikin in indonesia case : evap leakage before 4 years and the installation using right procedure vaccum 20 mins and using good pipe 0.8,gree is far more good materials I check myself on hvac ac store,no 2 is panasonic....
Damn that's very disappointing, my MHI unit similar to yours has been going strong for over 2 years now -- used everyday for 14-18 hours a day. Cleaned religiously every 6 months. The installation guys did a great job on my unit, so sad to hear about your experience. It's such a great machine!
Indian service mens are never properly trained even the ones certified from lg or others do not know basic stuff have no brain to think about it they just follow like a 3yo learning abcd. I have 10ac & 5 of them are inverter, 1 of them is 22yo. I take the free installation from dealer but when they come to install i supervise their work. Not a single one of them ever pulls a vacuum, i have my own equipment to do this before opening the valves,most of them will do the pipe on right side and put the flare nuts out side which makes repair & maintenance unnecessarily complected, most of them do not use a spring or proper pipe bending tool (which i guess your installation guys did not do & that's how they cracked the bends when cleaning the ac) . I have 4 pannasonic ones in my restaurant & not a single one has failed in last 5yrs of daily use. I clean them every 6m cus they get a lot of oil & dirt. Inverter or non inverter is not the issue. Proper preventative maintenance & knowing your stuff is the issue. I have never seen a single indian service men as good as the ones we see in other countries. Indian ones do not even know how the thing works & so they take hours of fiddling to find any fault. Lg ones are pretty crap too.
Sorry but this install is done poorly: as per mhi instructions a pressure test needs to be performed before releasing the gas, this was not performed during initial install and with the repair. Also, when welding the line they should used backflowgas inside the line. Otherwise you get soot inside the machine. It looks like your line was to short from the beginning… R32 gas has a higher operating pressure than your previous units. This higher pressure will show faulty installations sooner, eg leaking gas. The machine was leaking from the start, considering you lost all the gas on a short line within a short periode of time or during the service a leak was created 😢
Why is My Mitsubishi spitting mud like water or dirt stains out of My AC. No matter how much I clean it or service it. I've hardly bought Mitsubishi slim model few months back maybe 4. And they suck at service. They said it's because of dirt which i can't believe. They cleaned the whole thing although they are irresponsible and rough but again within few weeks it's spewing out same dirt filled spots . What to do kindly help. No matter how much i complaint them they do nothing except coming and putting some n cleaning it just to happen the same . Is this the problem of soot you were talking about?
@@ayanroy4651 I think your drainline is clogged. Out the indoor unit 3 lines can be seen. One is de drain line for moisture. If it’s placed so the water cannot leave it with mold or spew water in your rooms
I own Mitsubishi heavy srk20css s6 1.6ton, 2016 purchase. Not a single issue till date, only last year it required indoor unit wet cleaning since evaporator coils were jammed due to dust, got it serviced from my dealer for 1500 & the cooling & air throw was back to day 1. Curious asked about pcb rate, glad to hear since mine was a non inverter model the cost was just 5000😂. I reside in odisha, temperature at my place rises to 45-47 degrees, all ac’s sweat with such high ambient except this one. Will go for another one definitely again this year.
I also have the same model if I put the temperature🌡️ of ac set on 18 I have to wear blankets, my room size is around 250sqt Best ac company in the world Never compare to other brands
Purchased O general premium inverter ac. Had a gas leakage issue and now pcb issue. Pcb was covered under warranty. For gas leakage check and refill he charger me 4000-5000₹ . I own voltas and bluestar acs too. Dont waste money on this so called heavy duty premium ac
Sabse best desert cooler with heavy exhaust 🪭 fan rest ac of any company are nuisance headache and heavy stone hole in pocket to maintain and bear ac bill😊
Great video, just a few pointers for anyone looking to get the MHI AC:
1. Most important - Vacuum your copper lines before you cycle the gas in the system for the first time. The vacuum pump is to be connected to the lines and run for 20-25 mins, until the pressure shows zero on the pressure meter - hold this vacuum for 20 mins to ensure that there is no leak in the line. - almost 99% of all Residential AC Installation personnel skip this most crucial step.
2. Use high quality copper for the high pressure lines - the ones with smaller diameter - Mandev and not cheaper unbranded copper
3. PCB drives fail on all machines - even the most robust TRANE, Daikin, BlueStar etc. try not to run the machine more than 12-14 hours a day if your cooling load is really high - i.e. compressor is running continuously at peak performance - measure with ammeter
4. Size AC as per cooling needs - inverter ACs are not ideal where there is a very high cooling load due to ambient and external factors - like lots of glass area, or the room is on the top floor etc. Provision for the extra cooling capacity ideally.
I have the non inv 1.6 ton Mitsubishi heavy ac... performing poorly...grill temperature 16 degrees😢
@@RishabhSingh-xz6fz 16 degrees is good ?
Good points
So will a 1 ton inverter ac work for a 100 sqft, sealed but not insulated with direct sunlight coming from two sides and the roof the majority of the day?
Your reviews are helpful and honest. Calm voice and good grammar are music to the ear. A welcome change from the 1001 other channels that call every other ac "best" and just want you to use their affiliate links.
Dear Sir, your candour and clinically thorough assessment of this otherwise very good offering made for sound viewing. Your honesty in sharing your disappointing coupled with your fair assessment have helped me immensely in decision-making on ACs as well. Keep your videos coming. At the end of the day it seems as if there are some loose ends in the MHI way of addressing matters that seem to undercut its own commitment to engineering excellence.
couldn't agree more
It is sad to see such a wonderful product being handled like this however considering performance of other air conditioners, options are limited..if service is good , product is average.. hope MHI improve their service and start taking ownership of faults instead of playing blame game..all things apart , excellent video and articulation is top notch.
Extremely detailed review. Thank you for the information.
Ondia is doing well
I am also experiencing something along these lines. I had bought 3 ton MHI inverter ACs. One of them jas stopped cooling. When contacted the dealer, he didn't respond for 2 days as he said he had no staff. When finally the staff arrived, he didn't even care to touch the AC and said that the cooling coil is gone and it will cost ke like 20k, with no warranty of functioning. He also said that his boss is a scammer and he personally threw away like 5 ACs this week because "MHI has this problem and is a shit product" he said. Then this worker went on to say me that I should buy a different AC from the firm he has already set up 😂. Idk what to do, I'll probably have to bring a non official expert to check out the problem. That dude literally told me to put my AC in trash 🗑️
I personally think the lack of refrigerant is the problem. This video has me convinced that I should get a second person to do this.
It's a shame really
Never buy brands which depend on local harami dealers for service. That's why I always buy LG or Daikin which have a good market share and network. Anyways, do check your AC with an independent technician, it's probably a gas leak in the pipe.
@@Chopper153 Daikin having it for last 10 years they use 3rd part service center too and provide 0 warranty on any parts currently the guy is saying coil i gone on my 3 yr old unit and replacement is 9k without warranty not acceptable. Daikin Technicians are not trained and awaful.
Yes, I too am very disappointed with Mitsubishi response to maintenance of their products still under warranty.
I’ve got 4 Mhi acs oldest being from 2010 and youngest from 2018 no leaks. Oldest one only recently gave an issue. Their service network has gotten terrible they assign techs which have no training or diagnosis method just go by what they feel. Misplace screws chop wires to remove things etc.
I have been doing the cleaning etc myself as most of these services folks always ruin things it misplace screws and then ask you to pay to make it right.
At 3.5 seconds you can clearly see that it's cooling capacity is 7100 watt not 7700 watts..and power consumption is also high as per brosher..plus this ac consume 2500 watt of power but they have written 1840 watts max
True. Some things in mhi brochure are not right. 1.95 ton 4* unit consumes only 1450w around where as brochure says 1635w
That is really concerning, I was very keen on the MHI however now watching your experience and this low quality service I will have to think about an alternative.
thank you for sharing.
Every company has low quality service from my experience in India. I've seen Voltas, Carrier, Daikin, LG & Samsung.
@@HailStonE999 same here. I’ve experienced lot of brands and service is the weak link for almost all.
Yes, service is the weak link but it is possible for us as consumers to keep a close eye on preventive maintenance.
@@jacobfamilyyoutubechannel2937 for that you’ve to get knowledge about HVAC and keep an eye on technicians when they work at your home and correct them and get your work done properly. They fool people who don’t have knowledge but who have knowledge are treated good by the technicians.
No matter which brand you buy, it's the service which makes you cry. I live in a small city and struggling to get my Hitachi Inverter issue diagnosed. I would not recommend buying an inverter ac.
whats the problm with inverter?
One thing I noticed you put indoor AC unit too close to ceiling (false-ceiling).
Yes, we’ve just had Mitsubishi air conditioning installed and they said they shouldn’t be against the ceiling. Ours have a gap of approximately 5cm or just over 2 inches.
Always Buy a Indian Brand AC for its Best Service Support.
I have Voltas and its service is one of the Best in the Market🎉
Please suggest whether rubber pads are required to be placed below the four legs of the outdoor unit while installing it on wall mounting brackets to avoid any vibrations. Will they come along with ODU package?
So it good to buy daikin or gree model? Than mitsubishi? From Phillipines
Experience same actually you have won experienced technician/engineer that you buy this Aircon my personal experience last 4 years about iapl group they only focus on sales not after sales service no doubt machine is too good but installation most important in ac and the air condition never run out of gas exception pipe leakage etc please contact best won technician ialp group only provide 3rd party service local technician
One of the main reason people are skeptical about buying Mitsubishi products is their poor after-sales service. Rather buy an inferior product comparatively with great service
Is Mitsubishi Heavy Industries Hot and Cold ac good or one should stick with cooling only models?
This is the problem with every company in India.. SHODDY Technicians who first do not install the AC with proper care & leave important steps. Then if there is a problem then mishandle the issue & the product itself like its trash & has no value.... They do not care how you spent your hard earned money to get a good product which is priced at a premium compared to other brands....
Then the common thread is they badmouth inverter AC's & still want customers to buy non inverters only. The world has moved on to Inverter AC's but these people refuse to learn & move o this new technology which is now almost over a decade old in India. Had this experience with ~5-6 AC' techs & authorized Daikin technicians as well....
The inverter AC has more electronic components & sensors for the working of the AC for which they need to learn how to find faults using Ampere meter & multi meter on the PCB to pinpoint the specific component which is not working but they simply have one response for every electronic problem.. PCB is gone & need replacement. Maybe its a scam run by the companies to get more money from customers but this is only an assumption on my part. Maybe these technicians are so lazy that they refuse to learn & move on to Inverter AC's repair properly & will continue to do so for the next 5 10 years till the companies are forced to stop making Non Inverter AC's in India by BEE...
Daikin technician are running scam
I got the installation done by our personal technician who has been serving the top clients in our city since many years and rather than getting it installed by dealers technicians and my dealer was Eco cool and he has monopoly of selling MHI acs here in Ghaziabad and service provided by them is worst I have seen so far.
Could u review vintage ac
After gas did it work well ? It is both dealer and the company fault for employee technicians who are scandalous to extract more money from the customer.
Does ur room ceiling get's direct sunlight?...i see u have false ceiling done..is there any insulation done under the false ceiling like glass wool etc?
Need your long term review sir!
IAPL group is basically an importer with no technical expertise. This is bad enough but God help you if you need a replacement part given that MHI AC division is not present in India.If you insist on buying Mitsubishi I think Mitsubishi Electric is a much better buy at least you get Mitsubishi Group warranty and authorized service.
That is not the case. I have both ACs installed at my home. Mitsubishi Electric has also outsourced it’s installation to third party. It is pretty much upto the installer on what quality of service it intends to provide whilst try to find the balance between workload and manpower.
Overall, I am satisfied with both the installations.
MHI (non inverter) AC have higher air flow, slightly lower power consumption and higher capacity compressor. Hence, the slight premium over ME.
If you have a service center in your city, do visit them and they’ll clear all your doubts regarding MHI ac.
If you don’t have MHI service center, go for ME.
Even OGeneral’s service reputation isn’t great at many places. It’s hit or miss.
Mhi is not registered in india as a company.. Mitsubishi electric can provide u replacement if unit is faulty where as mhi can't...i have both electric msgk18va and mhi srk20css 1.6 ton..my mhi compressor went faulty within 3 months...iapl is agreeing to change compressor and not whole unit...
Sir will you recommend Daikin or mitsubishi
Always Mitsubishi
Purchase it your life will be set
Great review. I went with Panasonic CS/CU-QU26ZKYF which has been working well. 2.2 ton (convertible) for 65K including Installation with almost similar specs of the MHI you reviewed.
How is the cooling performance of the ac and your approximate room size for 2.2 ton ac.
@@dibyadishdas1551 Cooling is good, room is around 450 sqft. Once cooled, average power draw is around 2 amps. During initial cooling phase, it goes to 7 amps at nominal capacity.
Outdoor Unit is under a shade.
Do Panasonic provide 3mtr copper pipes with the AC boxes . Their website doesn't mention that . And some owners on TH-cam & Amazon reviews have said they had to pay extra for pipes as their Panasonic ac didn't come with copper pipes
@@manout-kidin8735 3mtr copper pipes included
@@dibyadishdas1551 good
Feel sorry for your bad experience my friend. But a product this experience MUST provide top quality pipings to ensure longevity and performance and not leave it to the choice of these shady so called technicians to pick some random cheap pipe quality which is not going to be the best ones as they would want to eat some money there too. And this is now obvious from the leaks in just one year. You must have thrown that crappy pipes atleast now and gone for new high quality ones to ensure pain free operations as everytime you need to shell out for labour and gas charging too.
Every brand have PCB problem in inverter AC and low cooling problem are just too common with inverter AC. I got this AC in non inv model and man it’s perfect in chilling and service part we can’t do anything every brand have 3 rd party service is SSDs so it’s more or less same in terms of quality. I myself saw service of MHI O General Voltas Daikin and LG in all of them LG technician are always more oriented for customer satisfaction for other brands it’s your lick like I got bad technician for Voltas and daikin but Okok for O General whereas MHI technician which I got is really knowledgeable cuz he works with these MHI ACs in commercial spaces and learnt a lot to handle pipes in long running length and AC technically too.
Why LG ? Why not Daikin or Panasonic?
Always buy a 30 thousand ac. Replace it every 3 years.
30 ka lakda kaam nhi krta hai bhai 😂
Ye baat shi kabi😂😂mne bi Asia hi krta hu 4 saal.hogye 23 hzr ka lia tha 1tton ab cooling thodi km hogyi sily ab new luga
could you please tell me the difference between the model which you have and the model what i have chose to install(MSY-GN26VF)..PLEASE....
The model you mention is from a different company, Mitsubishi Electric. It is also a very good option and perhaps just as good as the MHI. It has a lower ISEER rating though, meaning slightly more power consumption. Hope this helps.
Its a very good model. I have MSY-GN22VF since 2018 and i am very much satisfied.
It's a good model. But make sure your dealer is trustworthy. Everything depends on the quality of installation as the machines themselves are top notch.
Hello there, I am planning to get two of these Air conditioner for my shop, I want to ask you about it's cooling, is it up to the mark, and how much energy it consumes., And do you think Mitsubishi heavy ac an good option.?
A big medicine shop in my neighborhood has two MHI fixed speed ACs for the last 6 years. It runs almost all day long.
@@Chopper153 is inverter ac good for top floor or non inverter is best
@@Ayan9gaming Top floor or bottom floor doesn't determine what kind of AC to buy. If your AC is used for more than 8 hours a day (like a bedroom), get inverter. Else fixed speed is better.
How can we identify where there is no gas in airconditioner?
No cooling
Sir for top floor home room 200 sqft what is best inverter or non inverter?
What's the grill temperature ?
im using the same machine
coincidentally i got this machine at the same time when Ashish bhai got his ...
as i was searching about this machine in youtube i came to know about his channel with his Mitsubishi AC video last year
as of now no issues
did my 1st service
in my home town there is no Mitsubishi Service
i did the 1st service with the local technician
i used mandev pipes
even though its not available in my home town
i made it (mandev pipes) to get from hyderabad during the installation
by the god grace no issues as of now
machine quality is very good
even i found no issues in Ashish bhai's machine too in this video apart from gas and pipe issues
it seems initially there was no proper installation that's it i.e., pipes...
i think
his machine is also working great...
happily you can consider MHI Machines
even Ashish bhai saying you can consider MHI...
Ac ki unit ke upar dekhna cooling capacity kam hogi aur inke brosher me dekhna zyada likhi hogi..same with power consumption
Why is My Mitsubishi spitting mud like water or dirt stains out of My AC. No matter how much I clean it or service it. I've hardly bought Mitsubishi slim model few months back maybe 4. And they suck at service. They said it's because of dirt which i can't believe. They cleaned the whole thing although they are irresponsible and rough but again within few weeks it's spewing out same dirt filled spots . What to do kindly help. No matter how much i complaint them they do nothing except coming and putting some n cleaning it just to happen the same
Sir I'm confused whether I should go for 2ton lg or mistubishi ac? inverter or non inverter
Hardware wise the MHI is in a different league, much better than the LG. However LG provides piping with the AC and have company technicians install everything. LG 2 Ton ACs are only 3 star and they don’t go bigger than 2 ton. In terms of inverter and non inverter, I prefer inverter ACs for their much lower consumption and slow spooling compressors. A large number of people have warned that they can suffer PCB issues. Between my 4 inverter ACs (LG, Panasonic, MHI) none has had that thankfully as yet. So my recommendation would be as follows: if the AC needs to operate in very harsh conditions and high temperatures, go with the MHI, if the area is not that large and is not directly exposed to the sun, go with the LG. Hope this helps.
Lg provides 10 feet copper pipe which are not pure copper
Some other material are used.
But Mitsubishi will not provide
But the installation man will bring the pure copper pipe
I bought a Mitsubishi Mr Slim AC unit 23K BTU last summer. Less than 11 months later it died. I called the installer who explained that if he took it apart, it would void the warranty, so I called Mitsubishi. Three weeks later and they are still "waiting for parts." I live in Thailand and the peak of hot season 43C+ this year was spent with no AC in my living room/lounge. I am not happy and will never buy another Mitsubishi product as long as I live. They are very happy to sell products, but infuriatingly slow about honoring their warranties. Unacceptable.
Most technicians advice to stay away from inverter acs cause of few reasons.
Pcbs are more on inverter acs all inverter acs which ever brand has two or more pcbs.
Old school acs also used pcbs but inverters have more microcontrollers and require more knowledge to repair.
Most of these techs are untrained to follow procedure.
When regasing you need to remove all the gas, add nitrogen and do a leak test then pull a deep
Vacuum and monitor for vacuum drop which can show leakage. You also need to add the gas only by weight which none of them do and they always use pressure method some may say 120 some 140 some even less it’s hard to get the right pressure in any mini split more so inverter. They find it will give an issue and always blame inverter ac.
Brazing they should’ve cleaned the copper portion before brazing else that weld will come off later.
They do not follow the Torque spec for tightening the flare (pipe connection) plus they also use Teflon tape which many manufacturers say never use.
Most of these techs also ruin the ac.
I’ve got about 4 Mhi acs inverter and non inverter. The oldest one is an inverter and after about 14/15 years gave its first issue.
You are in which city? Any idea about quality of MHI service in Ahmedabad?
Located in Gurgaon. Their service is nothing great unfortunately. Better to have a known service guy work on the AC, as long as no parts are required.
Love the MHI, but I faced the same challenge, took them 6 hours to install a split unit. Then indoor drain pipe was leaking, again the next day they had to send someone n fix it…
Yes unfortunately it’s all down to individual installers… It depends how good or bad they are. The hardware itself is top-notch though..
@@TechnologyRig though i really liked your emphasis on engineering quality of MHI ACs the service component is a huge wild card
... And if the installation and design of PCBs is another weak link then to my mind they can potentially negate the high quality engineering.... Overall the burden lands on the customer's head and wallet.
@@jacobfamilyyoutubechannel2937 the quality is good can vouch for it. Have mine since 2010 srk71 only recently there’s a major fault worked problem free all these years. I myself used to clean them as the dealers are terrible and don’t take care of the unit. The weakest link is the service dealers most of them won’t install as per guides won’t vacuum will not charge the ac as per weight but just use pressure and go. And definitely never uses nitrogen when leak checking
After watching the three months review of the same AC of this video, I decided to go with Inverter AC myself (SRK18 YSX2-W6). Now that you have had the bad experience, makes me wonder if I should buy it! And No I will not go with any inverter AC of any other brands other than MHI. I want to either go non-inverter or the interested model mentioned. Any thoughts?
Like I said in the video, this is just my personal experience at the one-year mark. This does not necessarily represent everyone’s experience. And the part that failed was not provided by Mitsubishi, the piping, which was supplied by the dealer. So the hardware itself is solid, you must ensure that the installation is 100%. Unfortunately or fortunately I report about products as I experience them, without any filters. So yes I would still recommend MHI.
@@TechnologyRig Oh! That clarifies. The parts that faulted was not provided by Mitsubishi.
BDW, your vocabulary and accent is really elegant and fantastic. Any suggestions on how to improve mine like yours?
@@Mr-Royn i have also buy the model (SRK18YXS2-W6) and installed this week, after watching the review am having some feeling arises in my gut but touch wood everything is fine till. There is an important thing i came to know that you have to register for your AMC for PCB and Compressor if the ac is installed by the dealer of your area but you have purchased it from the some other dealer. this is the case happening to me now.
Don't buy it they are liars srk18yxs2 ki cooling capacity 5600 watt hai aur jhooth bolke 5825 bta re brosher me .ac ki unit pe 5600 watt likha power consumption bhi bhut zyada hai..naa koi pcb shock proof hai
My father also gave me the task to buy the ac for the room.....Money eas not the problem.....I also loved mitsubishi ac......I also thought of buying mitsubishi ac....but however before buying any electrical equipment ,I have a habit of checking the service centre and the distance of the service centre from my location...in which the mitsubishi failed...that changed my decision.....
Told you before they are liars..actual cooling capacity on ac unit is 7100 jbki brosher pe yeh 7700 likhte hain dhokha dene ke liye..power consumption bhi zyada hoti..never buy this..only .non inverter models were good
Hi Sir,
This is J. Durga Prasad from Hyderabad. Recently I have purchased Mitsubishi Heavy Industries 1.3 TR Split AC 3 Star Non-Inverter Hybrid Model No: SRK15CXS-W6 for my living room in my Apartment flat. Five days back it was installed and is working fine. Now I would like to register the product with IAPL group as a part of warranty policy. In the blank warranty card which came along with AC packing, there is a column regarding "Compressor Number" in addition to Serial Nos and Model Nos of IDU & ODU. I could not able to find out "Compressor Number" on ODU Serial Number plate. Kindly guide me in this regard. Thank you.
Has the registration been done ? I had purchased srk20css non inverter 14 days back and when I called their customer care they said no registration is required for non inverter Acs. Please respond and clarify.
@@harikriz7 I have completed product registration by sending scanned copies of all relevant documents to IAPL through email for my Non-Inverter AC as well.
No wonder mitsubishi motors was shut down bcoz of poor after sales support. I have suffered with my lancer lxd. I have a lg gold model window ac 1.5 ton and it has never ran out of gas after me using it for 25 years.
I faced Similar issues when the technician blew up my motherboard and blamed it on me, while i saw the whole thing, my only fault was that i did not record every step they did, and they did poor quality jugad to make it work, sorted the fuse with the wire which blew out the board. Service totally denied to pay the cost and also had the audacity to say we will take the AC with us, to which i replied let me call the police, and only then they were scared. in the end I had to shell out 8000 rupees for new motherboard.
Split acs are nothing but permanent recipe for disaster. No matter what you do the reliability of these machines are very low.
Window ac has no substitute till date . Flawless performance, rock solid reliability, no freebies but pure performance.
I'm having mhi 1.6 ton split AC with R32 gas, installed one year above, if i sleep in the ac next day i can't open my eyes, it's full of irritation and dryness,even i tried different temp settings, still same issue,i suspect the gas r32 ,, anyone facing the same issue with mhi
It’s impossible for gas to mix with air, especially everyday. It takes a few seconds for the gas to leak out and then the AC will not cool. I think perhaps your issue is related to dry air directed towards your face… which may cause dryness in the eyes?
Ye galat tareke se lagaya gaya hgaram hava uper ki jati h vah jagah nahi mil rahi h
They were supposed to vacuum before filling gas, they did not do it. Again scammed u not cool
What about samsung?
It is always better to buy a fixed speed non inverter AC which is actually comparable to a 3 star AC. These are robust .There are no hassles and have a solid life. the service and spare parts costs are very low. It is better to actually buy 2nos. Of 1 ton non inverter ACs instead of a single 2 ton inverter AC. The evaporator and condenser sizes do not scale linearly with capacity in a 2 ton AC. So having 2nos. 1 ton AC is much better as the surface area of evaporator and condenser is much much higher . This itself would give higher efficiency.
Power consumption of two 1 ton AC’s is going to be higher than one 2 ton AC!
@@aaryan27 yes but cooling capacity will be higher than 2 ton AC and it will not run long enough to cool the room so eventually power consumption reduces in the long run. Most ACs don't run at full capacity one the room cools.
Nowadays, almost all brands are offering 5 years of PCB warranty. So it's quite safe to buy inverter ACs. The power savings are quite significant.
If you have higher usage of more than 1600 hrs a year then you should go for Inverter AC only under residential use with proper sealed rooms.
Above 2500 hrs usage every year you should go for 5 star Inverter with the best ISEER you can afford....
Get the most efficient AC in 1.95 ton with 4.2* rating - mhi. 25cwx-s6. I have it and it is pulling only 1475 watts at nights. In hot summers goes to like 1600w to 1700w. *Non inverter*
Consumer rights should make it impossible for sellers to restrict to their installers.
That's not in my case with my DAIKIN inverter ac and I got my all problems solved with zero Cost they have trained authorised persons and solved my pcb under warranty. Daikin has More practical and Much more stronger network than all Ac companies in india. Mitsubishi ac are good no dought but it requires properly trained technicians or it will spoil your hard earned money.
Go with Ac Which make more sense in comparison with this so called heavy duty acs. Daikin Have robust cooling and Power saving with Good service as well. Mitsubishi ac are hard to maintain with their pethetic service network and overpriced expensive parts
Same experience here. LG and Daikin have good services in my area. Also I'm usually very strict during installation and make sure proper procedures are followed. So far in 3 split ACs, no gas leak has occurred due to good installation.
@@Chopper153 True brother installation is the part on which life of Ac Depends properly vaccum ac before start and All other procedures.
Yeh mitsubishi heavy waale liars hain..na koi inki ye star ratings shi hai..mai guarante dene ko tyar hoon agr ye ac 5 plus iseer ka ho...brosher me 7700 cooling capacity likhi jabki agr ac ki unit ke upar dekhoge to 7100 hi hai aur power consumption bhi bhut zyada hai...same with other inverter models
@@jagdeepsinghsidhu6660 sahi bola bhai Upar se itna zyada expensive hota hai ki sara Energy saving cost nikal jayega 😂
@@pathikpatel010 saving krta hi ni bhai bas logo ko moorakh bnana hota..uske baad Bechare bol to skte ni hote..
Mitsubishi electric is best.i am using it from 5years.now a days in pakistan its 47 to 49 dgree
idk but ac quality now is downgraded i feel,and easy to leak on evaporator,they put more thinner copper materials on evaporator to cut cost,the ac will not last 1-2 years in coastal area without rust undercoat or 3-5 years in normal area,atleast only one brand i trust on my country is Gree,the materials i checked is far more good than others comparing big brand like panasonic or daikin they had less copper materials and i heard many case the expensive daikin the evap easy broke down only 2 last years (installation follow right procedure,vaccum 15-20 min before pump refrigerant to system and using 0.8 pipe installation)...
Lg,Voltas, Daikin, Bluestar is good
Mit heavy only for the rich
Daikin spit ACs are fare better than MHI and general airconditioners in terms of cost s
Nope.. I am suffering with DAIKIN parts failing every year. Something fails every ow or then even though I've used it with V-Guard Stabilizer from day one & have a three phase connection with proper voltage.. Mine is their JTKM 5 star 1.5 ton AC which is their top of the line product, Its utter crap.
So far have changed
1) Blower motor (Bearing started making noise after 1.5 years)
2) Remote receiver from indoor unit stopped working (Replaced Last year)
3) Vane motor started making tic tic noise this year when its flaps are opening or set in vertical motion
4) Compressor now getting switched off after 5-8 mins of operation.
Been waiting for parts since 28th Apr 2022 & still its not available.
For the last complaint technician told that Gas is leaked, F3 error code came, after recharging he says sensor is not working & maybe PCB is gone...
AC is 4.5 years old.... All repair done by DAIKIN only....
@@HailStonE999 v guard stabilizers are horrible they have aluminium instead of copper windings and overall poor quality.My brand new Daikin ac had unacceptably high noise in its first year,I changed the stabilizer to bluebird and the problem miraculously disappeared!
@@HailStonE999 Daikin quality and after sales service is horrible currently.
lol daikin in indonesia case : evap leakage before 4 years and the installation using right procedure vaccum 20 mins and using good pipe 0.8,gree is far more good materials I check myself on hvac ac store,no 2 is panasonic....
Damn that's very disappointing, my MHI unit similar to yours has been going strong for over 2 years now -- used everyday for 14-18 hours a day. Cleaned religiously every 6 months.
The installation guys did a great job on my unit, so sad to hear about your experience. It's such a great machine!
Indian service mens are never properly trained even the ones certified from lg or others do not know basic stuff have no brain to think about it they just follow like a 3yo learning abcd. I have 10ac & 5 of them are inverter, 1 of them is 22yo. I take the free installation from dealer but when they come to install i supervise their work. Not a single one of them ever pulls a vacuum, i have my own equipment to do this before opening the valves,most of them will do the pipe on right side and put the flare nuts out side which makes repair & maintenance unnecessarily complected, most of them do not use a spring or proper pipe bending tool (which i guess your installation guys did not do & that's how they cracked the bends when cleaning the ac) .
I have 4 pannasonic ones in my restaurant & not a single one has failed in last 5yrs of daily use. I clean them every 6m cus they get a lot of oil & dirt. Inverter or non inverter is not the issue. Proper preventative maintenance & knowing your stuff is the issue. I have never seen a single indian service men as good as the ones we see in other countries. Indian ones do not even know how the thing works & so they take hours of fiddling to find any fault. Lg ones are pretty crap too.
Sorry but this install is done poorly: as per mhi instructions a pressure test needs to be performed before releasing the gas, this was not performed during initial install and with the repair. Also, when welding the line they should used backflowgas inside the line. Otherwise you get soot inside the machine. It looks like your line was to short from the beginning… R32 gas has a higher operating pressure than your previous units. This higher pressure will show faulty installations sooner, eg leaking gas. The machine was leaking from the start, considering you lost all the gas on a short line within a short periode of time or during the service a leak was created 😢
Why is My Mitsubishi spitting mud like water or dirt stains out of My AC. No matter how much I clean it or service it. I've hardly bought Mitsubishi slim model few months back maybe 4. And they suck at service. They said it's because of dirt which i can't believe. They cleaned the whole thing although they are irresponsible and rough but again within few weeks it's spewing out same dirt filled spots . What to do kindly help. No matter how much i complaint them they do nothing except coming and putting some n cleaning it just to happen the same . Is this the problem of soot you were talking about?
@@ayanroy4651 I think your drainline is clogged. Out the indoor unit 3 lines can be seen. One is de drain line for moisture. If it’s placed so the water cannot leave it with mold or spew water in your rooms
LG service is gud but parts quality is substandard
I own Mitsubishi heavy srk20css s6 1.6ton, 2016 purchase. Not a single issue till date, only last year it required indoor unit wet cleaning since evaporator coils were jammed due to dust, got it serviced from my dealer for 1500 & the cooling & air throw was back to day 1. Curious asked about pcb rate, glad to hear since mine was a non inverter model the cost was just 5000😂. I reside in odisha, temperature at my place rises to 45-47 degrees, all ac’s sweat with such high ambient except this one. Will go for another one definitely again this year.
Hi
How is Inverter Model Any Idea ?
Nice
I also have the same model if I put the temperature🌡️ of ac set on 18 I have to wear blankets, my room size is around 250sqt
Best ac company in the world
Never compare to other brands
That's a bad install so I can see why you experience alot of problem
Mitsubishi Heavy Industries is overhyped. Better get Electric instead.
Overpriced and liars
Service guy fukd up the ac while servicing
Purchased O general premium inverter ac. Had a gas leakage issue and now pcb issue. Pcb was covered under warranty. For gas leakage check and refill he charger me 4000-5000₹ . I own voltas and bluestar acs too. Dont waste money on this so called heavy duty premium ac
Sabse best desert cooler with heavy exhaust 🪭 fan rest ac of any company are nuisance headache and heavy stone hole in pocket to maintain and bear ac bill😊
Substandard pipe insulation
Mitsubishi Heavy Industries is overhyped. Better get Electric instead.