@13:32 Did you apply any thread locker on the ends of the Mounting Bolts of the Rear Axle beam, when installing the Beam back? Or just correct torquing is needed here? Thank you for the great film.
They were very tight for me when I tried to remove them. Give them a good clean with a wire brush, spray them with some wd40 of other penetrating fluid and get a wrench or bar with good leverage, chances are rust has probably seized them.
Not silly question, can get kinda confusing. If you have a solid enough trolley jack, go for the middle of the rear axle. It should be solid enough, that's how i do it. Otherwise you could get away with a bottle jack in front of the actual jacking points and put a stand quickly on jack point once up. But if sills are getting crispy, it might be a bit sketchy😬
Much better than those tick tock vids you're making , the short vids crack me up
Decent video man! Strongflex do poly bushes for K11s, got some on mine and they are good quality, if you decide to buy some.
@13:32 Did you apply any thread locker on the ends of the Mounting Bolts of the Rear Axle beam, when installing the Beam back? Or just correct torquing is needed here? Thank you for the great film.
Nice!🫡
Nice
NICE👏🏼👏🏼👏🏼👍👍👍👍💥💥💥
Me again , got all the other bolts undone , can't get step 7 the bolt won't come off , but will not bolt
They were very tight for me when I tried to remove them. Give them a good clean with a wire brush, spray them with some wd40 of other penetrating fluid and get a wrench or bar with good leverage, chances are rust has probably seized them.
Mate I know it's a silly question how do you jack these up
My seals keep crumbling
When I put the on the jacks stands
Ignore me I saw this
Not silly question, can get kinda confusing. If you have a solid enough trolley jack, go for the middle of the rear axle. It should be solid enough, that's how i do it. Otherwise you could get away with a bottle jack in front of the actual jacking points and put a stand quickly on jack point once up. But if sills are getting crispy, it might be a bit sketchy😬
I used 2 Lifts for motorcycle, which I mounted on small rolling boards. Very convenient.
where can u buy new real axels
Scrap yard might be your best option in terms of price.
First!
G'man👍
😂