Super Bright LED Headlight with DRL and Turn Signals - Review and Install
ฝัง
- เผยแพร่เมื่อ 27 ต.ค. 2024
- 4x4 FLSTC was kind enough to send us a pair of 5x7 sealed beam LED headlights. They should be a nice upgrade for our Ambulance camper van.
You can buy the headlights here:
Use Discount code: ZKCRCP5T for 5% off
amzn.to/3Etw8WX
Tool List:
• Phillips Head Screw Driver
• Multimeter
• Wire
• Spade Connectors
• Crimping tool
• Heat Shrink
• Electrical Tape
• Soldering Iron and Solder - amzn.to/3l4e8cX (paid link)
#LED
![[LIVE] : ONE ลุมพินี 84 วันนี้!! คู่เอก "ก้องศึก vs เมืองไทย"](http://i.ytimg.com/vi/3kuzsAIDf1c/mqdefault.jpg)
Thanks, great video. Funny you got them for ambulance and jeep, I got them for ambulance and Fj40
They're not adjusted, but here it is. Great review!
Outstanding tutorial video, thanks, guys!!
Do they make it with a heated lens, if so, do you have the link or part number...
When doing something like this always try and do a "before and after" for comparison...
Some VLED V6 Tritons would complete the look for the factory indicators (front and rear).
When i turn my truck on 2005 f650 my daylights light turn on automatically. On my new LED lights i want to avoid the day lights or head lights from turning on and use the DRL in my new LED lights to be on instead. Any ideas how i can trick the truck relay or what ever controlls that to not turn on my headlights and turn on my DRL instead. ? Thanks for any ideas
I don't know. Maybe I'm just getting old and my eyes are weakening. But, I think these LED and HID lights should be banned. They are way too bright and aren't necessary. As much as I love Jeeps, the aftermarket LED and HID lights for Jeeps are the utmost worst of the worst. Just my 2 cents. Jeep on!
Definitely should not be banned😂
The only reason they are so bright is because people don't actually adjust them pr they adjust them to high especially the lifted f250s and silverados
@@hillcharlie2761fr. Stock f250's nowadays, with their dual-bulb non hi-beams are bad enough as it is. People start lifting their cars or even just slapping on (especially cheap) led bulbs/housings and everyone else ends up blinded.
I do believe that any and all bulbs should be further regulated. Lots of factory setups are coming out at higher and higher lumens. There's also a problem of nighttime blindness where the illuminated section is so bright compared to the unlit area that your eyes have more trouble with the light transition, making any other visible area hard to discern if there's something like an animal or pedestrian.
Don't think they should be banned, but they DEFINITELY need to be regulated better.
my name is Sky from SUNPIE Technology, we have 5X7 led headlights with RGB Halo, and I was wondering if you are interested in testing them.
i will!
I bought mines and they both work in low beam except when in high beam. Only one works in high beam. Anyone here know why?
If its one an not the other I would look into your wire connections
Can this be installed in a 2004 Toyota Town Ace?
Does the Town Ace have 5x7 headlights?
I have a 1980 I want to change the headlights for something like this, but the ones I have don't work the rest of lights work ,I buy regular headlights still don't turn on,can you have an idea what is the problem ? Thank you
I don't agree with removing the protective film before any installation just to slam the unprotected light surface on the work surface.
Lol I talk about that exact thing in another light install video
Nice review bro. Let's say have a certain more modern car with reflector lights that doesn't fit a square sealed beam...what if I get these and take off the front cover of my lights, and the front cover of this light and put them into my existing headlight housing, then put the original headlight cover back on...(after making sure they are attached correctly? Is that a dumb idea? Haha I want LED lights but don't wanna deal with the cost of a projector retrofit.
I guess it really depends on the shape of the headlights. You can get LED bulbs that fit in just about any headlight assembly off Amazon.
@@JeepSheepTV yea but I don't wanna be that guy with leds in reflector housing blinding everyone haha. It's an 04 saab 9-5. It has relatively square headlights
@@BWTECH0521 I think people would find these quite bright as well. It also helps to point them downward as to not blind everyone.
I put these on my 79 ford but the bottom middle bulb does not light up at all? Why is that ty!
Did you find out why
Did you connect the extra wires coming out the back of the light? As shown in the video, the bottom middle light is an amber tun signal that you need to connect to your turn signal circuit. It takes a little bit of custom wiring but its not terribly difficult.
@@JeepSheepTV what about the drl white wire ? Thanks
I ordered these exactly same headlights from Amazon and they said it was compatible with an 88 dodge dakota they aren't the headlight housing doesn't match up any recommendations any help is greatly appreciated
It looks like the 88 Dakota might have a smaller sealed beam headlight. I cannot remember the dimensions but there are plenty of aftermarket lights in that size. Sucks that Amazon said it would fit...
@@JeepSheepTV thanks for getting back to I appreciate it I guess I'll do a little bit of researching to see what size I need. Thanks again for your help
Where are these made?
Where do you think?...
Installed in my 84 chevy and when i put the parking lights on i get amber on the driver side and white on the passengers side .im curious how did you guys wire them?
Do they fit 85 c10 chevy square body?