i was at a shop and i was asking about a box stapler and the guy there gave me a like new in the box Manual Stick HC 150T C58 he told me the old owners of the shop had it and could not get it to work right for them ! first thing read the manual ! then remove stuck stappels ! works just fine ! and the best thing it did not cost even a dime ! hope you can get one the same way i got mine !
Chris, glad to hear you were able to get the tool to work without issue! If you ever experience any issues with the tool, feel free to reach out - We'd be happy to help you out. We also manufacture the staples for our tools out of Butler, PA - MADE IN THE USA! If you need staples for the tool, give us a call!
There are different versions of the stapler and staples that accommodate different types of cardboards. If you have the ECT/Burst for the boxes you're using (normally a stamp or seal with this info on the box somewhere) I can gladly let you know which model and type of staple would suit you best!
If stapling the top of the box to seal it, how down into the box do the staples go before it bends them back? Do you need space so it doesn't hurt the goods?
Thanks for reaching out! It really depends on the length of the staple you're using and the thickness of the box that you're stapling - we have a guide that can help you choose which staple is right for the boxes you're using, and once you know which staple you need we can match you up with a tool! If you have more questions or want me to explain in more detail, please don't hesitate to shoot me an email - jgalmarini@ismdirect.com - I'd be more than happy to help you out!
Hey Matt! You can get the botomit setup here: www.ismdirect.com/product/botomit-9x9-bt1/ or you can give us a call and we can set you up with the proper equipment to do what you need it to!
It does, but it will just be a little more tedious when it comes to stapling if the box doesn't have enough in it to give the flaps at least some stability when stapling - if this is the case, you may be better suited for one of our CL Anvil plier staplers that you can slide under the flaps to provide support for a strong stapling clinch and hold. If you have any more questions feel free to shoot us an email or give us a call!
@@ismenterprises2582 Cool .. Anvil plier stapler will not go full length, if carton is longer OR do you first staple one pin from one side with anvil plier and then next pin can be simply stapled .
i was at a shop and i was asking about a box stapler and the guy there gave me a like new in the box Manual Stick HC 150T C58 he told me the old owners of the shop had it and could not get it to work right for them ! first thing read the manual ! then remove stuck stappels ! works just fine ! and the best thing it did not cost even a dime ! hope you can get one the same way i got mine !
Chris, glad to hear you were able to get the tool to work without issue! If you ever experience any issues with the tool, feel free to reach out - We'd be happy to help you out. We also manufacture the staples for our tools out of Butler, PA - MADE IN THE USA! If you need staples for the tool, give us a call!
@@ismenterprises2582 thanks , it will take some time for me to use up the box of 2000 staples that came with it .
So it has this automatic "hands" to bend the staple from the inside, can the stapler and the "hands" goes through 1,6cm cardboard?
There are different versions of the stapler and staples that accommodate different types of cardboards. If you have the ECT/Burst for the boxes you're using (normally a stamp or seal with this info on the box somewhere) I can gladly let you know which model and type of staple would suit you best!
How much do the staples cost?
Give us a call or shoot me an email at jgalmarini@ismdirect.com and we can discuss pricing on staples!
If stapling the top of the box to seal it, how down into the box do the staples go before it bends them back? Do you need space so it doesn't hurt the goods?
Thanks for reaching out! It really depends on the length of the staple you're using and the thickness of the box that you're stapling - we have a guide that can help you choose which staple is right for the boxes you're using, and once you know which staple you need we can match you up with a tool! If you have more questions or want me to explain in more detail, please don't hesitate to shoot me an email - jgalmarini@ismdirect.com - I'd be more than happy to help you out!
I’m looking at one of those right now, but where do you get that bottom egg carton looking device ?
Hey Matt! You can get the botomit setup here: www.ismdirect.com/product/botomit-9x9-bt1/ or you can give us a call and we can set you up with the proper equipment to do what you need it to!
I want to buy
does it work on 3-ply corrugated box as well when box is not fully packed from inside ..??
It does, but it will just be a little more tedious when it comes to stapling if the box doesn't have enough in it to give the flaps at least some stability when stapling - if this is the case, you may be better suited for one of our CL Anvil plier staplers that you can slide under the flaps to provide support for a strong stapling clinch and hold. If you have any more questions feel free to shoot us an email or give us a call!
@@ismenterprises2582 Cool .. Anvil plier stapler will not go full length, if carton is longer OR do you first staple one pin from one side with anvil plier and then next pin can be simply stapled .
Even if carton is empty we can first do BoPP tape - and then staple and flaps will be holded by BoPP tape. I want one staple for 5 ply carton.
Sir stapler ka size kya ho ga
What is the price?
Currently, the manual stapler is $215.00, you are welcome to order online at www.ismdirect.com
Where can I get this machine in nairobi
Hey Jackson, we don't have any distributors in Nairobi unfortunately, but you may be able to purchase them from our website - www.ismdirect.com.
i need this masion how can e get hellp
Feel free to visit our website - www.ismdirect.com or shoot us an email to sales@ismdirect.com! We'd be happy to help you out!
Is this available in Bangladesh if yes where it is??
www.ismdirect.com - it would ship from the USA.
Is it available in kerala?
They are sold from the United States - we'd just have to work out the shipping to Kerala.
Di mana beli alat bgini
السعر والمكان
Nama produk dan belinya dimana
It is an ISM Carton Closing Stapler, can be purchased at www.ismdirect.com!
Cek harga bos
Gimana cara kerjanya
Harga berapa.. Minta nomer hp
Current price on the manual tool is $215.60 + shipping. You can give us a call at 724-431-0626!
Berapa harganya bang
ممكن رقم التلفون
Saya minta no hp yg bisa di hubungi
A good number to reach us at is 800-378-3430!
mas diberi suara untuk penjelasan biar mantap