Lidl PARKSIDE ® PIFDS 120 A1 weld 0,8mm steel without gas / Flux welding Test

PARKSIDE ® PIFDS:
www.lidl.de/p/...
Lidl PARKSIDE ® PIFDS 120 A1 weld 0,8mm steel without gas / Flux welding Test

[@jorgemotilva370]

Muchas gracias por el vídeo, hace 2 años que tengo esta máquina y por 89 euros que me costó no creo que haya nada mejor, he soldado muchas cosas con ella y hace soldaduras de calidad y es muy sencilla de usar, se puede soldar espesores finos, incluso carrocería de automóviles perfectamente, quizás solo se queda corta de potencia para espesores grandes, pero ahí prefiero el electrodo

[@giuseppebevilacqua2034]

Hello mate,i tested this morning.....great machine...👍👍👍👍👍👍

[@alexwade9921]

Can you go any thinner? 0.6mm steel, 24ga?

[@ionpiatra8302]

Buen trabajo!

[@edilbertoordonez1255]

Dónde la compraste

[@evanleebodies]

For the price, this is an amazing welder. Had mine for a few weeks now and it welds good straight out the box. However.......if you decide to get one the first thing you should do is remove the existing earth clamp and replace it with a good quality clamp. The supplied clamp is made of poor quality mild steel, I replaced mine with a decent quality clamp with a rating of 200A.

[@zaid-je5es]

Only mig welding in this machine??

[@dailydad6335]

Hi howndo you adjust wire speed because mine is coming out fast

[@sawek8880]

Can you weld cast iron with this welder?

[@evanleebodies]

Can cast iron be welded?

[@williamkilpatrick101]

Is it fitted with a 13amp plug for 240 volts?

[@haikatem]

Can this weld aluminum?

[@timobreumelhof88]

No

[@giorgosnak9927]

What is the thicknesses of the pieces you are welding!!

[@ivicastjepanovic7800]

0.8mm

[@Marc.Lanting]

it works much better with 0,9 on 0,8mm steel

[@mehere3013]

best wire for car panels

[@giulianorapone8047]

Ciao Gustavo dove posso comprare il filo per questa saldatrice 0,8 0,9 e da 16

[@adamjonas9646]

hey anserw pls can i weld car body with this welder?:)

[@ΒασίληςΚαρακούσης-τ6λ]

Από πού θα αγοράσω αυτό το μηχάνημα;

[@thequietroom3991]

Just bought one yesterday. Anyone able to tell me why my .9 wire arcs once with a pop, mc doesn't feed. Rollers are tight enough I reckon as it fed through from the start.

[@vladostevanovic356]

Kako podesiti da neprska prilikom varenja i koji materijal varis sa zicom
Od 1m i 0,9 m Tenks

[@DinoSaurusYT]

Ne moze da ne prska jer radi na punjenu zicu, ali zato postoji anti-spatter sprej, za one kojima se ne brusi pucne. Nasprejas, zavaris, ocistis cetkom - ne treba brusiti.

[@sharonluke3977]

That was the best video I’ve seen on this machine thank you. Can I ask would the 0.6 wire you changed to work on welding nuts together as I’d love to make a torso I’ve seen online..

[@peterbatka1869]

perfect video

[@aleksandarsrdanov1171]

Can I use "PARKSIDE® cored wire »PSFD B1«" with this device?

[@adamjonas9646]

why not?

[@aleksandarsrdanov1171]

@@adamjonas9646
Can you tell me what is the difference between Parkside welders PFDS 120 A2 and
PIFDS 120 A1?
Thanks.

[@BE-ART]

@@aleksandarsrdanov1171 The PIFDS 120 A1 has an inverter

[@aleksandarsrdanov1171]

Thanks

[@shanmuganathan5630]

What isthe prise?

[@spliffz0rplayingcallofduty637]

very cheap , 100 euro or so

[@mariuszklodowski2862]

Warto kupić tę spawarke????

[@Важныйэлемент]

Cześć. Kupiony dzisiaj w Hiszpanii. Będę w Polsce za 4 tygodnie. Jeśli nie zapomnę, napiszę jak to działa. Kupiony w Lidl za 89,99 euro.

[@damnthiccassboye7138]

Tak dobra

[@brianhowe982]

Definitely, I bought one it’s really good

[@solangigh.rusool7803]

Hi

[@janslavik8295]

Odradila ma tá bakelitová koncovka ktorá okamžite zhorí.

[@impazzitoinvolo]

Bella prova!
Molto bella! Presa in Italia a 119€:
th-cam.com/video/lmAM2_7ZxiM/w-d-xo.html
Unboxing con dati tecnici:
th-cam.com/video/eWA2f4oryZ8/w-d-xo.html

[@jaybradley3765]

Would this weld 0.7mm without blowing holes? Thanks