Making a NEON LED Night Light with Walnut
ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2024
- Thanks for stopping by! This video shows how I made a cool little night light using some LED Neon strips and walnut wood. Getting the neon to fit inside the cnc cutouts was quite the process. Hope you enjoy!
Link to the led strip used in the video (affiliate link):
amzn.to/3BCNbSU
Music by @dexbeats on Instagram, and @soundstripemusic
Follow me on Instagram!
/ agduzit
Amazing video and incredible talent, thank you so much for creating this. Owen loves it!
You’re most welcome!
Bro, you could be a TH-cam legend with this quality. Do more videos. Outstanding, thanks for sharing 👍👏
I’m super humbled. Thank you. I hope to make more videos soon.
Agreed, make more
Those router shots were insanely good, totally loved the camera work. However, I did mind those gaps between the led strips and the wood, also the connector housing/base was little bit rough with all that super glue
Great project and video edit! Look forward to your future builds.
Thank you so much!
This video needs more views. Awesome work.
Absolutely stunning work!
Suppppppppper badass editing on that quiet saw cut
Thanks so much!
Wow man. This was so good! Both the project and the video editing! Will be fun to watch this channel blow up!
Thanks for the kind words!
Looks great. Excellent job making the CNC parts interesting to watch. I haven't seen that type of LED before. I'll have to try them.
Thanks Dave. It’s always a challenge trying to make robots seem interesting haha
Amazing design, I agree that taking it vertical was the right choice really makes it stand out in the room a lot more. Thought it was really great how you adjusted your design on the fly to suit the different problems you came across 👍
Congrats man congrats! It was amazing
This is inspirational! Great work!
Nice Job Done bro !!!
It was fun to watch how you made that masterpiece !!!
super detailing,love your work
Looks awesome - Very beautiful work
Beautiful work 🙌🏼😁
You've got some talent, keep up the good work!
Thank you so much
You’re filming is on point my man! Did you use a flame to re darken that area of the laser engraving of your logo or how does that work?
Turned out amazing ❤️.
best one i saw. very nice work and well detailled design process !
Thank you!
That is beautiful.
That's awesome! Id love to have one for my room!
Nice work! And i mean all round. Great video (kept me watching) great cnc work and nice clean electronics! How do you make sure the led strips fit all the way and you dont end up having open spaces at the end of a letter? Great work man keep it up!
basically the strips can be cut to (in this case) a half inch, so the length of the runs for the letters are made to be rounded to the nearest half inch or so
It's rare that I don't have a cheesy, puny, or just eye roll-ingly comment...but this was so amazing and your VO was so freakin spot on. I can't wait for you to make more and more videos...selfishly haha
Dude I’m flattered! But disappointed that you couldn’t find a good pun lol. I look forward to those 😂
master at work
Bro idk how I came across this video, but its top quality. I was surprised to see you had such a low amount of views and subs. Your quality of video is very enjoyable for such a small channel. Keep up the good work dude. Everything was great!
Tip for removing hot glue is a bit of metholated sprits, white spirits or acetone but metho or white spirits are best and it will litterally fall off than the excess spirits will evaporate, has saved me sooo many times i cant count anymore!
Using my OneFinity CNC right now to do something similar for my wedding. Awesome project man, made me think about it in a totally different way.
Awesome! Congrats on your engagement 👍🏻
Really awesome! From the design to the video editing. Really talented. Subscribed!
hey man, please keep going your work are huge
Fantastic work!!
Thank you!
GENIUS!
thanks for sharing
Great film, well shot and edited. Nice narration/writing. The lamp is gorgeous, awesome fit and finish. Mahalo for sharing! ; )
Thank you so much for the feedback! I’m glad you enjoyed it.
Just wanted to say that I loved everything about this video: production quality, video editing, soundtrack, and overall pace were on point. Thanks for including some shots of where you had to improvise and your solution.
Beautiful and thanks for the upload! It amazing to watch and learn! Just subscribed!
Seriously cool. Super polished and well-shot video, too. Subscribed. :)
Perfect!
Great vid! Just subbed!
awesome video dude, great editing and design as well
Thanks a bunch!
Yes. Gotta agree. Great video. Looking to do same kinda sign. Yours really stands out in the crowd. Seen the link for strips. Need help though. New to neon. Other than strip, I guess you need what? Charger? Looked at Amazon. So I got strip idea. Going in blind…..what else is needed. Color will do me good also. Thanks in advance.
wow, nice work!
Thanks!
AMAZING 👏🏻👏🏻👏🏻👏🏻
Can you share the width/depth/bit used of/for the channels in the wood? Super cool project!
how much did you charge the client for this work of art? and how many hours total? great work
Awesome 🚀
I don't get why your views are so low.. the edit is incredible, all the videos sync with music, your skills are amazing.. I guess we will have to wait 8 years for this to be huge (thanks to youtube..)
Thanks, man! Hopefully one day YT features it!
Holy shit that's nice
My understanding is that you have to cut on specific areas of the light strip. I’m worried that with my project I might not be able to get these cuts to the perfect length because of this limitation. Did you just luck out on the cutting locations to line up perfectly where the ends of the strips were on the letters? If not, what was the trick you did to make it fill the channel all the way?
Hey great video, I would love to know which CNC Cutter are you using, if is possible… Thank you
Dope!
Beautiful work, thanks. I found yours by hunting for videos to learn to make led neon signs from scratch....that is, my knowledge is as yet minimal. Approximately how long did the project take?
That is cool
ooooooohhh coool i realy like it man
Awesome video! Where does everyone order their Neon led rope from? At least those in the United States.
This project is amazing! I love the look and the music in the video! May I ask, How did you design the letters so they fit the led perfectly?
The led strip had cut lines every 1 cm I think, so I was able to cut ONLY the strip just a little shy of the edge, but leave the silicone sleeve the full length of the letter channel. Hope that makes sense!
Wonderful job! What font did you use? Thank you
What kind of oil did you use?
Been working on something similar for a while but what i can't figure out is how to you put a channel in your text in the design software? Any tips would be very helpful. thanks
I used Adobe Illustrator. I just applied “Outline Stroke” to the text and it automatically created the channels. Had to adjust the settings a bit to get the right fit.
Great video man! You really lit it up! From
Lefty 👍🏻
Great job! Can I ask what CNC did you used?
I was just curious, I couldn't fully see the name or manufacturer on the orange pucks you had on the work table. Can you, or anyone else, tell me which brand they are? They are EXACTLY what I've been looking for!! Thanks!
They’re an old brand called Bench Dog Bench Cookies. I don’t think they are sold anymore; instead, Rockler sells them as Bench Cookies
Very Nice .....
Wow
genial tu vídeo..podrías decirme cómo es emprograma que usas para el diseño de letras
How is this video not 1m views???
killing it! great video, great edit. was it a bullet-style connector for power?
Thanks! I used T-tap style connectors since that’s what I had on-hand. Works just as good!
AGduzit sorry, i meant the external plug (that failed and got replaced).
Oh! Those were standard 2.1 x 5.5mm barrel connectors, which I got here:
12 Pack Female DC Power Cable Jack Adapter Connector Plug Led Strip DIY CCTV Camera System www.amazon.com/dp/B071NJBYJJ/ref=cm_sw_r_cp_api_i_WxGoFbTAEJCBV
Brilliant what wood did you use???
It’s walnut
what programs were used to design the light/font ?
Can I order my customized name led nion light??.
what gauge wire did you use for the soldering?
22
Good content!
Thanks!
Where did you get the neon leds?
Amazon
How much would something like this sell for?
This went for about $450
🇹🇷Çok güzel.. 👍👋
Do you make these to sell?
Can i get the files for cnc for please?????
Awesome Job!! I'm really interested in get one, by any chance you make those to sell? Please say Yes :)
showwwwww
Sadly link is broken :(
nice video, nice name.
Nice!
do you make and sell?
Hi, at this time, I don’t.
could have used that excess glue
can u make one for me custom? and how mutch
Send me a message: agduzit@ gmail
Only here for the algorithm
😁 seems to be doing its job
💀👌👏👏👏👏
LED is not NEON.
It sure isn’t, but it sure looks just like it!
@@AGduzit No. It doesn't.
where are you friend? are you okay, please share us somthing 🥺🤍
I want one
@wobydesign I do to ;)
It can be yours if the price is right
Yes! Love it good job! Your baby is lucky!
Can I order my customized name led nion light??.
Unsure what’s more impressive, your wood work or video work. Major props man. (Love the silent saw trick🤣😂)
Thanks! 🙏🏻
This is AWESOME AG! I made an LED neon sign myself for my channel and it's janky to say the least. This vid cleared up a lot of questions I had about cleaning up the soldering/wiring. Your craftsmanship is CLEAN! On top of that, your videography, editing, and post-production are all on point. I know you haven't posted in awhile, but I hope to see new videos up on your channel real soon. Liked and subscribed--came for the LED neon tutorial, stayed for the QUALITY. Cheers man and keep it up!
Your editing style is insane. I really enjoyed this video man.
Can I order my customized name led nion light??.
i have some similar LEDs but mine are only cuttable to 1 inch. it is such a pain
Hello! Can we ask for help on adobe illustrator please?
two things what cnc and laser cutter are you using?
It’s will getting heat so fast and maybe led chip will broke :(
So far it hasn’t broke. It’s been a year. And leds don’t usually get too hot that it would break the chip
@@AGduzit
Maybe you don’t turned it in more time but if it turn one more then 6h I think it will getting heat
U have to put aluminum heat shrink between wood and led it’s will be more efficient
Thanks for the tip!
@@AGduzit
U r welcome bro
Really cool.