ฝัง
- เผยแพร่เมื่อ 26 ธ.ค. 2024
- How to register and pair your receiver KAVAN R8 to your transmitter KAVAN V20.
👇 Read the full manual on our Wiki:
wiki.kavanrc.c...
Registration:
1. Hold down the pairing button on the receiver and turn it on. Wait for the red and green LEDs to light up.
2. Make sure your Internal RF module is set to TW Mode.
3. Begin the registration process by selecting [Register].
4. Press the [Register] button to complete the setup. The "Registration OK" dialog box will appear. Press the [OK] button to continue.
5. Turn off the receiver. This registers the receiver. However, you still need to pair it with the transmitter to use it.
Pairing
1. Turn off the power to the receiver.
2. RX 1 [Pairing]: Select [Pairing] to start the pairing process. A pop-up window will display the message " Waiting for receiver...".
3. Turn on the receiver.
4. Select the recently registered receiver. A message box will appear indicating that the pairing was successful.
5. Switch off the transmitter and receiver.
6. Switch on the transmitter and then the receiver. If the green LED on the receiver is lit and the red LED is not lit, the receiver is connected to the transmitter.
👇 Transmitter KAVAN V20:
kavanrc.com/ne...
👇 Receiver KAVAN R8:
kavanrc.com/ne...
The KAVAN V20 is made in official cooperation with FrSky.
💙 Follow us:
/ kavanrc
/ kavanrc
#radiocontrol #frsky #kavanrc
