Brother, this is such a great video. You have no idea how much stress you just took off my back. You showed me how to eat this elephant. I’ll shout you out when I am done. Stay tuned!!! Thank you, thank you, thank you!
Excellent video ! You saved me lots of time and it literally took me about an hour and a half to install everything. Thank you so much for this video bro 🙏🏽
The brackets which can be seen behind your air damns, were there any cuts in the plastic. Mine looks exactly like this but it seems that there was an additional plastic reinforcement that someone removed.
I'v never hurt my hands and fingers so bad with a chaotic bumper swap like this. Now i'm having issues getting the bottom holes lined up, there is no way i have to pull the bumper back to then screw in the screws.
Hey man I'm having the same issue. Did you figure it out then how to line up the bottom? I'm trying to install the m4 conversion bumper and I can't make the bottom part line up and consequently the two parts where connect with the fenders, near the headlights. I removed the black part he told to get rid but still nothing. Please help😓
@@Tayf32m4style Mine still didn't fit, acording to BMW the bottom shield was different which would caused this issue, i got rid of the bumper and got a M sport one instead which fitted like a charm. I know one thing for sure, never ever buy chinese or taiwanese quality car parts ever again.
Deciding between getting another sport bumper of m3 style bumper after my current sport bumper got damaged. May have missed it but did you keep the brake vents? also if you had to do it again is there anything you would change in your process or wish you had to make the process easier?
Ive watched a couple of your Video's, SUBBED because you have good content! I did not know you upgraded cars either! I just got my first N54 last week.
New game-🍺 every time you hear "bumper". 🥃 for every "front bumper". By the end of the video you will wake up with an m3-ish body kit fully installed.😂😂Great video. I'm guessing these instructions would generally apply to mperformance/msport bumpers also?
About $1300 if I recall correctly. No modification was required for the rear bumper to fit, other than swapping the plastic sensor bracket (new white bracket included with the bumper).
Hi, do you know if the tow hook size is the same for M3 and F30? I have the same bumper, and I tried the tow hook mounting license plate for the F30 but it was too short
I'm doing the same conversion but on a 320i. My car doesn't have front parking sensors though. The M3 style bumper has holes for them so I'm going to buy the sensors just to fill the holes. The only problem is, the 2 middle holes are bigger than the 2 outer holes. Was this the same for you?
@Taylor Rose gota use the airducts if the car didnt have any, assuming it wasnt an m sport. Also the wheel arches need to have the opening for the airducts. Wheel arches for M sport with air ducts connected from the front. That holds it in place.
Jd hy I have and 335i 2013 Mpackege and the ome bumper is broken so I buy a me bumper but my car have sensor parking and the bumper don't have the holes for the sensor you know what drill size I need in order to make it the holes?
I would pick the OEM emblem, stay classy
I love that bumper. I put it on my Infiniti!!!
I like the normal emblem the best but the carbon fiber one doesn’t look bad
Brother, this is such a great video. You have no idea how much stress you just took off my back. You showed me how to eat this elephant. I’ll shout you out when I am done. Stay tuned!!! Thank you, thank you, thank you!
Glad to help, Edwardo! That's why I make these videos! Good luck
If you really wanna finish the job you should also install the m3 style mirrors
Awesome video! Car is looking awesome 🤙🏼
Thanks man! Awesome kit!
What if you need a front license plate?
Very good video with view in details and excellent explanation !! I wish other posters to take notes ❤
This video saved my life! Amazing tutorial for this kit, cheers!
Awesome! I'm glad you found it helpful!
P.S. Any other emblem other than factory is RICE.
Justin Slawek why’s that?
Hahahah
Good job men!
Man*
Excellent video ! You saved me lots of time and it literally took me about an hour and a half to install everything. Thank you so much for this video bro 🙏🏽
Nice job. Solid video 👌🏽
I just did it to mines
Alpine white though
Looks amazing bro
Watching your channel is like watching Hollywood box office movie.
People should subscribe here great video.
Hahahah thank you
Emblem should be 100% up to you and red accents go well together with dark colors 💪🏼
i just took my bumper off today to do some work and it was all 8 mm with the t-style bolts on top
Well detailed and amazing
Keep the good work man!!!!
Those wheel look meaty! Car looks totally different!
Thanks man!
Video starts and ends 22:35 to 22:40
Thanks for this great video :)
I will change to this Bumper too
Greetz from Germany
I’m glad you enjoyed the video!
Just ordered this along with some spyder smoked headlights. Gonna be fun putting it all together
Fine work sir.
Amazing video, thank you very much!
Did u have your fog light error from the fog light delete coded out
No I still need to code it out. No new rivets needed other than the wheel well liners
When you left the fog cables like that.. Do u have any lights on dashboard?
The brackets which can be seen behind your air damns, were there any cuts in the plastic. Mine looks exactly like this but it seems that there was an additional plastic reinforcement that someone removed.
Carbon fibre emblem fo sure!👌🏽
Looks sweet dude
How was your air ducts lining up for this new bumper? Do you need OEM Msport ones or they lined up good with airflow ?
I'v never hurt my hands and fingers so bad with a chaotic bumper swap like this. Now i'm having issues getting the bottom holes lined up, there is no way i have to pull the bumper back to then screw in the screws.
Hey man I'm having the same issue. Did you figure it out then how to line up the bottom? I'm trying to install the m4 conversion bumper and I can't make the bottom part line up and consequently the two parts where connect with the fenders, near the headlights. I removed the black part he told to get rid but still nothing. Please help😓
@@Tayf32m4style Mine still didn't fit, acording to BMW the bottom shield was different which would caused this issue, i got rid of the bumper and got a M sport one instead which fitted like a charm. I know one thing for sure, never ever buy chinese or taiwanese quality car parts ever again.
Which Command clips are u using?
The oem fog lights from the old bumper can be intstaled on the new bumper?
Deciding between getting another sport bumper of m3 style bumper after my current sport bumper got damaged. May have missed it but did you keep the brake vents? also if you had to do it again is there anything you would change in your process or wish you had to make the process easier?
Good diy, very informative. Go with blk on blk emblem. All four pieces blk. Look sick
You did not cover the issue with the belly pan cover and sides extension not fitting with the M3 style bumber. What you did on yours?
Nice work bro!!!.
Thanks man!!
Wassup bro I’m planning on getting a 3 series 328i derive will I be able to get the M3 conversion bumper??
Hi, what type of clips did you use to secure the wiring for PDC and headlight washers?
I have the silver/black cf overlays on my OEMs. If you're getting new emblems I'd go with that color scheme
Oem is always the way to go
You can just use the stock bmw logo while you decide which one to buy right ? Or is it different ?
I do not see why not? They are double sided taped. Take some work to get off.
Justin Slawek if I’m not mistaking they’re not actually put on there with double sided tape they’re just two pins and that it
@@bmwhn7733 Yep. Just adhesive on the back. Heat / Pry tool / Fishing line and its gone!
Around how much the total kit will usually cost you? I'm thinking about doing same to my 2015 BMW 328i x, but not sure if it worth it
760
Ive watched a couple of your Video's, SUBBED because you have good content! I did not know you upgraded cars either!
I just got my first N54 last week.
Awesome! Thanks man!
Did you end up putting those air vents back on or keep it off
That’s so sick!
Looks great but ima prob keep the msport. it looks a too wide in the front without getting all the side fenders.
What are the clips you used for he windshield wiper hose?
Did this aftermarket bumper fit the stock front splash shields ?
Carbon fiber with black!! They're sick asf
Will m3 front splitters fit with the bumper or would you still need to use regular 340i add on splitters?
I was looking into this conversion myself. But I've got the automatic cruise control black box in the front grill. Did you see a way to retrofit it?
Hmmm... my dad's 550 has that box too. You'd probably need to create a custom mount of sorts.
@@JDCarsChannel it's surprising that the M3 never had cruise control as a option to buy
What size rims and tires are you using and is it a stock height and shocks ?
I need your help, i have m4 style f30 i need to cut the medal in front bumper because its on the way its not fittin to my f30 what to do?
Yoo Jd how much did the paint shop charge you? I live in Mass and I just got my m3 conversion bumper for my f30.
what kidney grills for this bumper I can’t find any for mine
Amazing! How did you deal with the fog light error? I did a delete but have the light. Wondering how you cleared yours. Cheers!
I have just been ignoring it 😂
You can probably code it out with Carly or BimmerCode
New game-🍺 every time you hear "bumper". 🥃 for every "front bumper". By the end of the video you will wake up with an m3-ish body kit fully installed.😂😂Great video. I'm guessing these instructions would generally apply to mperformance/msport bumpers also?
Hey man, nice job! Can I ask you one question? Did you buy it with painted, or you painted after you got it with unpainted?
Thanks! I bought it unpainted
How much did the kit set you back before painting? And did you have to alter the rear arches for the rear bumper?
About $1300 if I recall correctly. No modification was required for the rear bumper to fit, other than swapping the plastic sensor bracket (new white bracket included with the bumper).
@@JDCarsChannel that’s a fantastic price
how much did you pay in total for paint job for these pieces? just ordered my bumper and side skirts this weekend super excited thank u broo
Great video 👍🏼 where did you get this body kit and how much was it? Thinking of doing something similar to my 2012 330d
Hey JD Cars!
Do you have any Tips to me about style/modifice BMW x1 2011 ? Hope you answer me😎
Maybe an exhaust cutout to make it sound meaner?
Do you need to put new rivits in
what editing software do you use?!
Hi, do you know if the tow hook size is the same for M3 and F30? I have the same bumper, and I tried the tow hook mounting license plate for the F30 but it was too short
OEM emblem always. It suits better on black edition BMW
Damnnnn bruhh looking good 🤤
Thanks boss!
What year is the car? I got a 2013 328 worried that it won't fit
So do you not have to put the wings on for the m3 bumper to fit?
Sorry, what do you mean by wings?
@@JDCarsChannel oh sorry I forgot, I mean fenders
I'm doing the same conversion but on a 320i. My car doesn't have front parking sensors though. The M3 style bumper has holes for them so I'm going to buy the sensors just to fill the holes. The only problem is, the 2 middle holes are bigger than the 2 outer holes. Was this the same for you?
Sweet! Yes - the two inner holes are larger, but the included parking sensor brackets fill them completely
Looks good! you gonna get a hood eventually?
Thanks! Yes planning on it!
Are you gonna do the Interior conversion aswell??
Probably an M3 wheel... probably not the seats
Did have your bumper fit tested before having it painted
Nope. Just sent it
Nice!!
Did you do a trial fitment before paint?
Nope! Just sent it!
How do you remember where everything goes?
Just take photos of the process
Would the install be the same for the 2017 320i? Assuming the positions are the same and I only have parking sensors
Yes
Are those depo headlights or oem?
OEM
this looks amazing omg, what year is your car?
Thank you! This is a 2012
Send me the link to the emblem you got, trying to find one to fit mines
Did you completely removed the airvents ?
I left them in the car
Should I do this or m sport bumper
Totally up to you! The install process is virtually identical
How long did this take?
Where is the place to Buy these bumpers? Do they fit to a 2012 328i?
Kiesmotorsports.com ! Use code JD5 for a discount. They have bumpers for almost every year BMW 3 series
Is it possible to install M3 Style front bumper with BMW E66?
Nice video
A comparison in plastic/abs material with the OEM bumper could be interesting!
Thank you! Good idea!
Yo bro is the Bmw 335 and Bmw 318i the same or kind of the same because i want to know if the bumper will fit on the 318i
Unfortunately I don’t think it would fit
Where can I find that exact bumper?
i have the same setup on my f30 love it !!
I did that same conversion now im having trouble finding the undertreys and wheel arches that fit
Hi, I'm having the same issue. How did you solve it? Please help me
@Taylor Rose gota use the airducts if the car didnt have any, assuming it wasnt an m sport. Also the wheel arches need to have the opening for the airducts. Wheel arches for M sport with air ducts connected from the front. That holds it in place.
Did you remove the bottom bumper brace?
Yes
now you need the side view mirrors and the emblem
Fog lights are behind the mesh?
Not on this particular build. I opted to delete the fog lights for a cleaner look
@@JDCarsChannel clean
Yo JD how big are your rims and tires?
19inch wheels... more specs in my wheel video
JD Cars you ever run into flat tires problems bc of how low profile they are?
Jd hy I have and 335i 2013 Mpackege and the ome bumper is broken so I buy a me bumper but my car have sensor parking and the bumper don't have the holes for the sensor you know what drill size I need in order to make it the holes?
I don’t know the size sorry. You should measure to get the correct size
And other things how long takes to you reciving the emblems mine are taking for ever in tt
finding it hard to pick between a black sapphire 328 m sport (harman kard & 22k mi) and a white m sport (no harman kard & 33k mi) Any suggestions ?
I'd probably go m sport and then upgrade the speakers myself.
M3 fenders next
where can i get those rims
Keep it oem, I had carbon fiber ones but they just don’t look right for me🙈
My man!
Is that your house or your parents house? No hate I’m just curious. It’s a cool looking house and nice driveway. Great setup.