Replacing the Logic Board on a Chamberlain Whisper Drive 1/2 Hp Belt Drive Garage Door Opener
ฝัง
- เผยแพร่เมื่อ 31 ม.ค. 2017
- Replacing the Logic Board on a Chamberlain Whisper Drive 1/2 Hp Belt Drive Garage Door Opener.
The logic board inside a garage door opener is the brains of the garage door opener. It contains the radio frequency (RF) receiver for the remotes and other control components. If the remote controls don't work or the garage door doesn't open and close properly, the logic board might have failed.
Warning: Undertaking repairs to appliances can be hazardous. Use the proper tools and safety equipment noted in the guide and follow all instructions. Do not proceed until you are confident that you understand all of the steps and are capable of completing the repair. Some repairs should only be performed by a qualified technician.
FOR PARTS AND TECH SUPPORT VISIT
www.chamberlain.com/parts-and-...
Thanks for watching!!
PLEASE GIVE A LIKE AND DON"T FORGET TO SUBSCRIBE!!
/ mudblokey - บันเทิง
I totally agree 100 percent, Chamberlain, has the BEST CUSTOMER SERVICE, out there... I will always buy my units from Chamberlain..
🔥💯🔥
Excellent video! Watching your video was better than reading the instructions. Thanks!
Glad to help!! 😁👍🏼
Very useful video. Thanks. You can also buy the entire back cover with the logic board already assembled on it from Chamberlain. That is even easier to install. Thanks agin.
🙏
101 subscribers and counting!!! I can't beive how may subs I have. Thankyou for subscribing. You rock!!!!
Liftmaster 1270
Good things come to good people!!
My wall controller isn't talking to my Chamberlain belt drive opener but my vehicle clickers work just fine. I called their customer service and they're pretty sure it's the logic board and they're sending me a replacement. I sure hope that does the trick.
Chamberlain tech support is generally spot on. Good luck keep us posted!
How should you connect the remote and wall button after changing your logic board?
The remote you'll have to activate the LEARN button. Then press the remote a couple times.
Wall button goes to terminals 1 and 2.
@@garagedoorgeniusThank you!
@@zfli1272 🙏🏼
I'm about to order a replacement like this. Battery backup won't stop beeping even with new battery or no battery. Do you happen to know have any advice on a simple way to just stop the darn beeping? Aside from that it works fine. In 10 years I've never needed the battery backup. Seems like there must be a way but I've searched and searched...
Kelly Wilson
Hi Kelly. If you unplug the battery that should have stop the beeping. Have you contacted Chamberlain tech support? The very well could be a logic board issue meaning that changing out the logic board is going to take care of that issue.
I know it sounds crazy, but yes, even when I unplug/remove the battery it keeps beeping. I did call them and they helped me troubleshoot. They were great, but that's how I came to the conclusion of the logic board. I think I'll just cough up the money and order it. Thanks for this great video on how to switch it out -- I have it saved so I'll be using your video when it arrives. And thanks for taking the time to reply. I love learning how to take care of stuff like this on my own, thanks to awesome people like you!! :)
You got this!!
Please don't hesitate to ask any questions.
Mine only goes down. Inspected the whole thing twice, via magnifier, multimeter, etc. All seems fine but even at the board arrows. The only one that works is down arrow, same with the clickers. You think is the logic board?
If I was a betting man I would lay my money down on a logic board. You could contact Chamberlain tech support to verify, kind of straight from the horse's mouth sort of thing. Plus if it's a newer machine it may be under warranty and they can send you one for free. Just depends on the age of it. I know they have had problems with wall buttons and logic boards.
@@garagedoorgenius just 4 years and 5 month old but let me tell. Like 10,000 cycles, we open and close it like 10 times a day.
@@garagedoorgenius luckily I was under their five year warranty. They are sending the module and logic board.
Awesome 👍🏼!
Hi, any idea the length of warranty?
Each model varies. I would have your model number and serial number and call Chamberlain tech support. If it's a newer unit I think most of them are three to five year parts warranty. But then again I would just check tech support.