I am getting error on Olivetti MB2 printer after installing a new ribbon cartridge "Please use the original ribbon". Any solution to this? As I want to use compatible ribbon in it.
Sir printer is not printing properly. After printing 1 2 page properly, printer is making sound (dhak dhak). Kindly suggest something what is the problem as we have done internet explorer print setup setting also but printer stops printing good format after doing good format printing for 1 2 pages. When it makes unusual sound its alignment got distorted. Printer keeps on printing right aligned after this sound. Kindly help
prob Paper pull and eject normally printhead issue Can try to calibrate first pls unplug printer cable before calibration refer video and still happen change printhead ..another issue change head cable with Printhead and check results
thanks a lot i did the calibration and the printer worked. Thanks
Video me clear nahi samjh aaya..
Ek to station 1 press kiye the baki dusra kya press kiya hai..? Jab open kiye tha uska dhakkan
I am getting error on Olivetti MB2 printer after installing a new ribbon cartridge "Please use the original ribbon". Any solution to this? As I want to use compatible ribbon in it.
Can you print images with it ?
do you mean print result after calibrate ? can see minutes 1.53
when i turn on the printer olivetti pr2 plus flashes BREAK and lights ON, how do I solve the problem. Thank you dear friend
Do full service and dismantle machanicm check board clean up maybe got stapler bullet inside still happen change mainboard and printhead
@@sanimototravel ok thanks a lot i solved the problem by cleaning the sensor shell
Respect, Olivetti pr 2 plus the left half of the paper has no print and the right half of the paper has a print. How to solve the problem? Thank you
Print test page to check how many printhead pin left. Then check mylar. Mylar cannot move around while printhead is moving
The station 2 light blinks whenever I start the printer kindly guide
Unplug com port cable and calibrate still happen replace printhead and clean photo sensor /mainboard
How to solve USB is not woking problem in logic card?
Check interface parallel / com / USB
or Replace new logic board
Break Button light blinking continuously
Test few time maybe can
My Olivetti pr2plus printer after switch on ready & station1 leds lights are blinking. What isd solution?
Remove machanicm and service printer try to clean mainboard (head cleaning spray) still got issue pls replacement mainboard
Sir printer is not printing properly. After printing 1 2 page properly, printer is making sound (dhak dhak). Kindly suggest something what is the problem as we have done internet explorer print setup setting also but printer stops printing good format after doing good format printing for 1 2 pages. When it makes unusual sound its alignment got distorted. Printer keeps on printing right aligned after this sound. Kindly help
Pls tighten carriage belt remove top cover screw potition at the back try unscrew and fix back
I have a problem with olivetti pr 2 + pulls in the paper and throws it out immediately, how to solve this problem. Thanks
Do calibration and check results
@@sanimototravel when I do the calibration light sation 1 and sation 2
@@mikidjuka5446 full service and takeout machanicm check board and cleaned
@@sanimototravel thanks a lot of serious problem just like you said
pull in and eject the paper immediately, how to solve a problem. thanks
prob Paper pull and eject normally printhead issue Can try to calibrate first pls unplug printer cable before calibration refer video and still happen change printhead ..another issue change head cable with Printhead and check results
@@sanimototravel thanks a lot i did the calibration and the printer worked. Thanks
Very good work
.
How to solve blinking station 1 and 2
Service and check mainbord replacement needed
Buat rakaman semula. xjelas lah . xdgr. sendiri rakam ka. good job.
Hp cap ayam ini je yg ade
tak dengar la suara merdu
Posa