RV Camper Motorhome Wall Delamination, Easy DIY wall fix for Bulges & Bubbles on the Sidewall.

Rv Fiberglass Wall delamination is a problem for many RV owners. How and why delamination occurs is fairly straightforward.
In this video on RV siding delamination, a leaking window seal caused the fiberglass siding and plywood to delaminate on this RV.
This video shows how to fix the water damaged wall using the Composet SLV (r) special RV wall epoxy & a building a basic clamping system. Easy and inexpensive DIY for bubbled fiberglass walls on RV's, campers, motorhomes, and trailers. In many cases the Composet RV delamination Repair Kit can fix bubbles and bulges on Filon sided RV's.
This situation seems to be across all brands and models. Whether you own a Winnebago, Thor, Four Seasons, Coachman, Fleetwood, or any other brand, It's worth a look.
Camper, motorhome, and RV wall problems are typical caused by water getting in the wall. Leaking seals around windows, vents, doors, and hatches are common, even in brand new coaches. Cracked, missing, and improperly installed caulking is another problem area.
Delamination shows up as bubbles and bulges in the fiberglass siding. This gets worse over time as the delaminated area expands and contracts from temperature cycling.
Fiberglass resins and over-the-counter epoxies are not the best choice for repair delamination. A special formulated composite bonding resin called Composet SLV(r) is the best choice for gluing delmainated RV walls.
For more information visit www.delamrepair.com
For RV parts visit www.rvroofandwall.com
on FB at / composetproducts , or on Instagram @ #rvdelaminationrepair

[@blackfireclub]

Awesome video didn't know this could be done! Thank you!

[@bruceprigge5212]

thank you!

[@paulferguson2574]

scotty kilmer????

[@OffTheBeatenPath_]

Get your hearing checked

[@Xplorer228]

What kind of clamp system do you use?

[@شديدشداد-ط7ث]

أحسنت يا خواجه متاز

[@fireside007]

YOU ~ ROCK! !

[@stevebeaulieu2617]

Do you know if the resin will melt the styrofoam insulation ?

[@composetproductsl.l.c.dela2844]

The Composet SLV and the Composet Compobond are Styrofoam safe.

[@oldschooltwist18]

this looks to be about the same setup consistency as marine penetrating resin?

[@composetproductsl.l.c.dela2844]

The Composet SLV system is probably a little thicker than a penetrating resin. I can't say for sure because I am not sure which marine product you are comparing it to. The one thing I can add is that some of the penetrating resins/epoxies have a high solvent content (to make them penetrate), and the solvents attack Styrofoam. Composet SLV has zero solvents and is Styrofoam safe.

[@GimpyCamper]

Any ideas on how to apply pressure to the front of a curved RV?

[@composetproductsl.l.c.dela2844]

yes-it has been done

[@gerardocasillas6168]

Where are you locate

[@irresistible72]

I have been trying to find someone to help us fix our small delamination problem and I’m not finding anyone. Do you fix RV delamination for people?

[@2lauracoleman]

Did you find anyone to repair yours?

[@irresistible72]

@@2lauracoleman yes but the estimates we got-were a few thousands of dollars. At this point we are just making sure everything stays caulked good and so far it hasn’t got any worse, thank goodness.

[@btchhopperou812]

@@irresistible72 Drill a few small holes at the top of the delamination and use large syringes to 'pump' it full of epoxy resin(@home depot, etc.), just use LESS of the hardener so it sets over a longer period

[@irresistible72]

@@btchhopperou812 thank you 😊

[@mariofollowerofjesus8068]

Shouldn't the manufacturer be responsible for damage repair

[@composetproductsl.l.c.dela2844]

You would hope they would, but most warranties pretty much protect them from water damage.

[@brandonboisvert]

You'd be surprised to find out most rv manufacturers only offer a 1 to 3 year warranty on structural. Regardless if you spent $20K or $2million crazy huh

[@aterack833]

Not to deter away from your product, but gorilla glue (the squeeze tube) can work for small amounts of delimitation but needs strong mechanical clamping as it expands as it dries, it will have a hard time getting into the further out areas the product shown here could get to in a breeze and if you have more delimitation than what the gorilla can reasonably do (about 4 inches past tip of nozzle at best) then using this kit first is a must as the gorilla glue could block this product from doing its job, a turkey syringe with some IV tubing or similar can work but beware that it is very thick and will give a hard time going through, it’s also messier to use gorilla glue if the hose comes off, but for some people this product may not even be available to them, just offering an alternative fo those who need it, but if it’s anything more than an annoyance of delimitation (ie an actual problem) then it’s best to get a kit from these guys

[@composetproductsl.l.c.dela2844]

Gorilla glue is a good product. However, it is a "moisture cure" product that requires a certain amount of moisture/water to cure. Not always a good thing, especially because gorilla glue has a tendency to expand and push parts apart. It also has a limited temp rating