Kaiweets KTI-W01 // test - review

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 ธ.ค. 2024

ความคิดเห็น • 8

  • @Guns_N_Gears
    @Guns_N_Gears 8 หลายเดือนก่อน

    1st
    Looks like a nice unit. Id like to see a comparo with a known brand to test accuracy.
    Great video David👍👍

    • @Woffy.
      @Woffy. 8 หลายเดือนก่อน

      There accuracy is sufficient for most non quantitive measurements as the non professional usually incorrectly assesses the objects emissivity and therefore the radiance of Infrared. A 'Black body' radiator would be 1, generally oil based products are 0.95. Table available on the net. Avoid measurements from Stainless steel, Nickel, glass, brass and cooper without applying a paint or tape to the surface to bring the emissivity to a close to 1 as possible.
      As a retired Themographer with a $35k IR camera under my desk I can say that this £240 camera offers some good features not seen on cameras under £500. The temperature overlay onto the visual image is a surprising feature as it the distance adjustment however no tripod bushing is a big mistake.
      For a budget camera without visual optics equal if not better to those toys you attached to phones, I would suggest you could do worse than the £119 GOYOJO GW192 from Aliexpress. FLIR cameras equal to the one featured would be around £800 and probably made by the same company but don't quote me.. hope this was helpful

    • @Guns_N_Gears
      @Guns_N_Gears 8 หลายเดือนก่อน

      @Woffy. Very, very nice and detailed reply!!!
      Thank you, and God bless:)

  • @twocvbloke
    @twocvbloke 8 หลายเดือนก่อน

    I guess they expected the end user to have three hands, given the lack of the tripod mount... :P

  • @sssssssss4258
    @sssssssss4258 6 หลายเดือนก่อน

    Thank you . Is there a comparison between this and a phone that has a thermal camera? what do you prefer ?

  • @reubenk7331
    @reubenk7331 8 หลายเดือนก่อน

    Well $300 isn't terrible compared to a lot of them I have seen. Thanks for the run down!

  • @martehoudesheldt5885
    @martehoudesheldt5885 8 หลายเดือนก่อน

    30 minutes and a 3D printer will have you a holder. or a piece of pipe with a bolt in the bottom.

    • @DavidMcLuckie
      @DavidMcLuckie  8 หลายเดือนก่อน +1

      Now you've got me thinking where I put the 1/4 20 nuts and bolts I bought.