Elitech Temperature Data Logger RC-5+ and RC-5+ TE

แชร์
ฝัง

ความคิดเห็น • 42

  • @windkl
    @windkl 2 ปีที่แล้ว

    Extraordinary device with exceptional accuracy in measurements!

  • @Famdoc1000
    @Famdoc1000 3 ปีที่แล้ว +1

    I purchased the RC5+ for continuous temperature monitoring for storage of COVID vaccine, as required by the CDC and the NYCDOH. I am quite satisfied with the device, found its set-up process relatively easy, accompanied by this video and am able to upload data for submission to my health department.

    • @ElitechTechnologyInc
      @ElitechTechnologyInc  3 ปีที่แล้ว

      Hi, we really appreciate your feedback. Any problems, please contact us freely.

  • @SonicOrbStudios
    @SonicOrbStudios 8 หลายเดือนก่อน

    Love these for diagnostic in refrigerators at my apartment complex

  • @vincebush
    @vincebush 2 ปีที่แล้ว +2

    I could not find the Thermal Time Constant info on any data sheet so I took a chance and purchased one. I measured a whopping 8 minute Time Constant. It take 40 minutes to reach a new temperature. FAR too slow for what I need so I returned it.

  • @starhopper457
    @starhopper457 ปีที่แล้ว

    I now have one and so far love it. A question though - can it store more than one program and then I pick which one to run? I may need it for an astronomical event where I may not have immediate access to a computer to adjust things, so having multiple templates would be nice.

  • @PaulaAndreaAriasArellano
    @PaulaAndreaAriasArellano ปีที่แล้ว

    Hello, I need help, the pause and play symbols appear on the LCD screen of the RC5+ at the same time.
    How can it be removed to start recording data???

  • @Carla-hq6yp
    @Carla-hq6yp ปีที่แล้ว

    Do you have a Elitech temperature logger/device with a Bluetooth option?

  • @cwilliams9400
    @cwilliams9400 2 ปีที่แล้ว +1

    Should I leave it in the fridge and it will regularly monitor the temp?

    • @ElitechTechnologyInc
      @ElitechTechnologyInc  2 ปีที่แล้ว

      Hi, that's right! The logging interval can be set in our free software according to your preference.

  • @Carla-hq6yp
    @Carla-hq6yp ปีที่แล้ว

    Does the RC-5+ have a Bluetooth option to retrieve temperature log?

  • @MohamedAhmed-nh6ef
    @MohamedAhmed-nh6ef ปีที่แล้ว

    Is this data logger reusable or it will log for certain period then it life end like 60 days or 90 days logger ?

  • @Neinei0913
    @Neinei0913 2 ปีที่แล้ว

    hello, device shows 6/21/2021, how to change to current date and time? thanks

  • @unionse7en
    @unionse7en ปีที่แล้ว

    any way too download csv data to a mobile phone in the field, rather than a laptop?

  • @ronkloiber
    @ronkloiber 2 ปีที่แล้ว

    Hello, I have the RC-5+ I am able to start recording after I have set the parameters in software, but if I stop the recording, I am not able to start it again without saving parameters to it again. Is this normal? if not, how can I start and stop multiple times? Does it append to an existing log, or start a new file?

  • @DIVA17MARIAN
    @DIVA17MARIAN 2 ปีที่แล้ว

    Hello I have a question about the Calibration (temperature) parameter, how to use it?

    • @ElitechTechnologyInc
      @ElitechTechnologyInc  2 ปีที่แล้ว +1

      An offset (not slope) calibration is possible using the RC-5 software. With the device connected to a USB port (and the software permitted to "make changes to this computer" despite the "unknown publisher" or missing certificate): Click "Parameter Set" (in toolbar or Settings menu), then enter the required delta (negative to decrease the reading) as "TemperatureCalibration" near the bottom of the second column, then click button "Save Parameter", confirm and Exit. Note that although the Up/Down arrow buttons change the offset by a full degree, you can edit to the displayed resolution of 0.1°. For any further questions, you may have a look Elitech FAQ part.

  • @cburshtein
    @cburshtein 2 ปีที่แล้ว

    I just got mine but it's showing NC and the play+stop icon are on and off constantly. It doesn't start when the play button is pressed for 5 seconds. Where can I get assistance?

    • @ElitechTechnologyInc
      @ElitechTechnologyInc  2 ปีที่แล้ว

      Hi Cecilia, the NC message appears with two possible reasons. One is the temperaure is out of the measurement range. Another one is the sensor issue. You may contact our support team via support@elitechus.com

    • @windkl
      @windkl 2 ปีที่แล้ว

      probably it is configured through the app to "external" sensor type. You need to change the sensor to "internal" .

    • @cburshtein
      @cburshtein 2 ปีที่แล้ว

      @@windkl It was not, it continued to go off and on randomly.

    • @windkl
      @windkl 2 ปีที่แล้ว

      @@cburshtein I see. Then it's definitely defective.

  • @auniesakinahh3030
    @auniesakinahh3030 2 ปีที่แล้ว +1

    sorry hi , how to set up the date .

    • @ElitechTechnologyInc
      @ElitechTechnologyInc  2 ปีที่แล้ว

      Hi! To setup the data and time, please connect the device to your computer, open the software ElitechLog. Go to Parameter, and select the correct time zone and click Save Parameter in the end. If the time zone setting field is greyed out, please click Save Parameter directly, it will sync to your computer time automatically.

  • @windkl
    @windkl 2 ปีที่แล้ว

    Could you provide info about the response time of temperature measurements?

  • @caslamdq
    @caslamdq 2 ปีที่แล้ว

    How do I have to set the parameters to get an hour-by-hour daily record during a month?

    • @ElitechTechnologyInc
      @ElitechTechnologyInc  2 ปีที่แล้ว

      Hi! Are you trying to set the logging interval to 1 hour? If so, please connect the device to your computer, open the software ElitechLog, go to Parameter, find Logging Interval and set it to 1 hour 0 min 0 sec. Click Save Parameter in the end. Then you device will be ready to start a new logging with 1-hour recording interval.

    • @caslamdq
      @caslamdq 2 ปีที่แล้ว

      @@ElitechTechnologyInc Hi, thanks for your answer!. Yes, I have set the logging interval to 1 hour. However, it recorded during 6 days and wrote one register. Thus, I have just one temp Max and Min. What I need is a daily record with its Max and Min records. Is this possible?.

    • @caslamdq
      @caslamdq 2 ปีที่แล้ว

      @@ElitechTechnologyInc Hi, thanks for your answer. What I need is to get a daily record with its Max And Min Temp for at least 1 month.

  • @FB-gm6el
    @FB-gm6el ปีที่แล้ว

    i wish things like "low battery!" and "recording in process" were a bit clearer/more intuitive...

  • @coolmonkey619
    @coolmonkey619 2 ปีที่แล้ว

    Hi can I use this as a stand alone room sensor.

  • @meme-mm2wp
    @meme-mm2wp 2 ปีที่แล้ว

    Hi, is the device can be calibrated?

    • @ElitechTechnologyInc
      @ElitechTechnologyInc  2 ปีที่แล้ว

      Yes, you could send the unit to your local calibration center for the re-calibration service.

  • @muhammadarfanulaziz1507
    @muhammadarfanulaziz1507 3 ปีที่แล้ว

    it can be submerge in liquid for 24 hour?

    • @ElitechTechnologyInc
      @ElitechTechnologyInc  3 ปีที่แล้ว

      Hi Arfanual! No, they cannot be submerged into the liquid.

  • @ablosport312
    @ablosport312 2 ปีที่แล้ว

    Can it measure temperature from +2 to +8°c?

    • @ElitechTechnologyInc
      @ElitechTechnologyInc  2 ปีที่แล้ว

      Hi, yes, the measurement of RC-5+ and RC-5+ TE is both -30°C~+70°C.

    • @ablosport312
      @ablosport312 2 ปีที่แล้ว

      @@ElitechTechnologyInc thank you very much..

  • @rajkumars9867
    @rajkumars9867 11 หลายเดือนก่อน

    Avalible in low cast any one u want contact me