Hey did you have to loosen the engine out to get the rear head off? I need to do my rear head gasket (front already done) - just wondering if the head can come off with engine still in the frame?
can be pulled out from above, the cylinder remains on the engine ,the engine does not have to be removed from the frame, only the antifreeze container is removed
I got one few days ago and have been checking it, and the bike after a while driving and in idle one Cylinder stop working they rear one, when i test the spark plugs, they are good, so do You know what it could be ? Also theres oil pumping through the hose to the air filter somehow, bike is not smoking and has nice torque, but after a while one Cylinder stop working, idle is stable no missfire unless i accelerate
@@denismorosan9717 I fixed today the problem with the cilynder turning off, now its working fine, but the engine is pumping oil in the engine breather, what it could be, seems like past owner adapted something in the rear cylinder
@oleg korider I have the 2004 model hyosung gt 650 with 13000 miles on it and goes pretty well and what troubles were they given with the cylinder heads.
I have problem after I start motorcycle and leave to stay on idle one cilinder stop working did change rear coil timing chain is in good condition as well engine got only 8560 miles on it need your help guys why is one cilinder stop working after I leave on idle for 5 min ish engine just keep dying
![HYOSUNG GT650 небольшое ТО обслуживание карбюраторов и не только [ 1 часть]](http://i.ytimg.com/vi/Ax2B9Tznnu0/mqdefault.jpg)
Hey did you have to loosen the engine out to get the rear head off? I need to do my rear head gasket (front already done) - just wondering if the head can come off with engine still in the frame?
can be pulled out from above, the cylinder remains on the engine ,the engine does not have to be removed from the frame, only the antifreeze container is removed
Front & Rear timing r same or different
Hi could you help me to fix timing hyosung 250
👍🏻👍🏻
Здарова Денис! Сможешь патсказат не запни шум паивилса в матрице и Теана прапал стук какоито такоиже мото
I got one few days ago and have been checking it, and the bike after a while driving and in idle one Cylinder stop working they rear one, when i test the spark plugs, they are good, so do You know what it could be ? Also theres oil pumping through the hose to the air filter somehow, bike is not smoking and has nice torque, but after a while one Cylinder stop working, idle is stable no missfire unless i accelerate
is it an efi model or with a carburettor the carburettor wants to clog the jets while standing and then it doesn't work well
@@denismorosan9717 it's carburator and about the oil in the breather ?
@@denismorosan9717 I fixed today the problem with the cilynder turning off, now its working fine, but the engine is pumping oil in the engine breather, what it could be, seems like past owner adapted something in the rear cylinder
@@FrankieCA99 how much oil is in the engine, did you check?
clean the air hoses from the engine to the air filter
Hello kahan se ho aap sir
Can u tell me the piston size diameter in mm for this 650??
🤷♂
81mm
2005-2006 year production hyosung GT650 have troubles with cylinder heads. old type must be replace.
@oleg korider
I have the 2004 model hyosung gt 650 with 13000 miles on it and goes pretty well and what troubles were they given with the cylinder heads.
Mere pass he 650 or 250 650 ka pistan khrab ho gaya
I have problem after I start motorcycle and leave to stay on idle one cilinder stop working did change rear coil timing chain is in good condition as well engine got only 8560 miles on it need your help guys why is one cilinder stop working after I leave on idle for 5 min ish engine just keep dying
you followed my video, what should be the distance between the intake and exhaust
www.manualslib.com/manual/1177055/Hyosung-Gt-650.html?page=95#manual
@@denismorosan9717 I did check that everything is fine in perfect order
@@mightysolutions2660 only idle or even when you give the gas
it can be a spark plug, or a dirty nozzle carburetor when clogged does not get fuel at idle
In my hyosung 650 one cylinder not firing..any solution bro??
check the spark plug
No spark is coming..but still not working..any sensor may be defect??
@@madhavkishan7561 which model is , efi or carburetor
check the charge on the battery, or coil
one cylinder works ?
Aap ka ph numbar
Hello kahan se ho aap sir
Mere pas 250 hey
Kia howa piston ko ?