#488
ฝัง
- เผยแพร่เมื่อ 7 ต.ค. 2024
- In this video I head out to a new client with the Baumalight TRL 620d mini skid steer and @Kubotatractorcorp U-35-4 mini excavator to clear out a backyard and get it level enough to plant grass and mow!
Check out our Amazon Storefront for all of the products and tools we use daily!
amzn.to/47w7X5G
Check us out on Instagram and Facebook! @duderanchdiy
Email us Questions! duderanchdiy1@gmail.com
Featured Equipment at the Dude Ranch:
Kubota L3901 Tractor
Kubota U35-4 Mini Excavator
Baumalight TRL620D Mini Skid Steer
Eastonmade 22-28 w/ Attached 16' Conveyor
Eastonmade MS-324
Maratach Log Grapple
Big Tool Rack Tractor Carry All
Everything Attachments 55” Wicked Root Rake Grapple
WoodMaxx MX-8800 Chipper
Land Pride RCR-1260 Rotary Cutter
RuggedMade RS-737 Log Splitter with Auto Cycle and Hydraulic Wedge Lift
Stihl MS 192 T
Stihl MS 200 T
Stihl MS 201 T
Stihl MS 290 Farm Boss
Stihl MS 362
Stihl MS 500i
Husqvarna 455 Rancher
Husqvarna 580 BFS Backpack Blower
Milwaukee Hatchet Handheld Chainsaw
Mingo Marker Firewood Measuring Tool
Accu-Mark Magnetic Firewood Marking Stick
Polaris Sportsman 500 H.O.
International 4700LP Hook Lift Truck
Sure-Trac 7'x14' Low Profile HD Dump Trailer w/ Custom Built Log Arch & Winch
Nothing better than getting the second job of digging drain tile once the house floods!
I’m with Elliot good job tho but most likely b back to do future work
All I did was what the customer wanted! I suggested a catch basin with a proper drain pipe away from the house but they wanted to see how it worked
A workbrow grapple for the excavator would be a useful tool for these types of projects. Mike with Outdoors with the Morgan’s uses it quite a bit for brush and small stump removal. Nice job!
You guys did some nice work! What a tremendous difference. Much more visually appealing.
Thanks a ton!
Looks great Jake! That mini excavator is definitely the right tool for the job.
Great video,great work
Not bad at all Jake for your first time better than some other people would do 😮😊❤
Nice work! I tell the guys at my work to always try something new..... but keep your wife😂
Nice job, My teeth came loose on my Kubota also, i just welded them on.
I think you did a great job grading that area Jake. When you bought the excavator you mentioned you might do some side jobs other than firewood. I can see you doing a lot more of that type work.
Thanks dick! That’s the plan!
What is the plan for all the water that's going to flow to the foundation of the house now??
If water run off and drainage wasn't an issue before, then i think you'll be fine now. Especially once he gets some grass and shrubs growing in on the hillside
That’s a good combo of machines!
It seems like you might be able to cut down the steepness of the slope by using the rocks to build a retaining wall at the top of the slope. It also looks as if they need a swale between the house and the slope to keep the water away from the house and draining towards the street.
They didn’t want any rocks or walls, they said they had a perforated drain pipe to dump to the driveway, I suggested a catch basin with actual drain pipe but they wanted to see how it all worked out 🤷🏼♂️
Hey Jake how are you doing I'm okay I guess love your videos and a great job hope Chris is doing well
Good job 👍 I'm not an equipment operator, but it looks like your plan to level a trail across the upper section, move the material, then fill the trail back in worked well 😊
It seemed to work out pretty well!
I've had bad batches of roll pins.
I hope that house has sufficient weeping tile or this amazing transformation could turn into a very large water problem
The customer stated there was some buried close to the foundation. They wanted to see how it worked out for now.
Great job. Looks great.
Thank you!
That's going to be quite the single slope sluice sending all the water down onto the house don't you think
I suggested the potential of a catch basin at the bottom with a drain pipe going past the house down the hill. They said rain water hadn’t been an issue in the past so they would wait and see. 🤷🏼♂️
How's the AC been on the Kubota after you recharged it? Another awesome job and video Jake.
Didn’t work… replacing the ac compressor on Sunday and recharging the entire system 😂
I’m just an armchair excavation guy but you may have wanted to put in a little swale to divert water from the house- or maybe it’s already there and the camera did no justice…. With the siding going all the way to the ground, and a 20 plus degree slope, runoff might become an issue there. Again, I’m not hating, I think you guys did good, it’s just an observation.
The homeowner said they have a perforated drain pipe that dumps to the driveway… I suggested a catch basin and actual drain pipe but they wanted to see how it worked out 🤷🏼♂️
If the bucket tooth doesn’t fit tight on the shank on the bucket, that could cause the pin to break. I kept loosing teeth on my bucket and just said to heck with it and welded them on. I realize that isn’t an ideal solution but it’s only for personal use on my property so it’ll take a long time for them to wear out. It’ll be a good excuse to buy a plasma cutter if I ever need to change them 😂
Yeah I’ve though of doing that, can always cut the welds but I’d rather find a good roll pin
@@DudeRanchDIY yea I don’t blame you. When you put the tooth on the bucket shank, is there play between the tooth and shank? You could have it built up with weld so it’s a tight fit.
Nice work Jake👍 will promote you from sloperator to operator 😅
That’s quite a promotion!
What is the plan for all the water that's going to flow to the foundation of the house now??
What is the plan for all the water that's going to flow to the foundation of the house now??
The homeowner said they have a perforated drain pipe that dumps to the driveway… I suggested a catch basin and actual drain pipe but they wanted to see how it worked out 🤷🏼♂️