Finding True Length& True Inclination Of a Line

Projections Of Points: • Projections Of Points/... ,
Projections Of Points: Location Of A Point: • Projections Of Points:... ,
Projections Of Straight Lines: Location Of Line: • Projections Of Straigh... ,
Line Parallel to Both H. P&V.P: • Projections Of Straigh... ,
Line Perpendicular to H. P & Parallel to V. P: • Projections Of Straigh... ,
Finding Traces of a Straight Line: • Projections Of Straigh... ,
Line inclined to H. P & Parallel to V. P: • Line inclined to H. P&... ,
Line Inclined to V. P& Parallel to H. P:
• Line Inclined to V. P&... ,
Line Situated On H.P(Marking Projections &Traces) : • Line Situated On H. P:... ,
Line Inclined to H. P&
V. P: • Line Inclined to Both ... ,
Finding True Length & True Inclination Of a Line: • Finding True Length& T... ,
Line Inclined to Both H. P&V.P: • Line Inclined to Both ... ,
Projections Of a line & it's Traces: • Projections Of a line ... ,
Projections Of a line & it's Traces: • Projections &Traces:Li... ,
#engineeringclasses #onlineengineeringclasses #onlinebtechclasses #engineeringdrawingclasses#engineeringgraphicsclasses#onlinegraphicsclasses
#onlineengineeringclasses #instrumentationandcontrolsystemsonline #mechanicalengineeringclasses #onlinemechanicalengineeringclasses #civilengineeringclasses #onlinepolytechnicclasses #onlineiticlasses
#onlinegateclasses #gatemechanicalclasses

[@venuyadav3470]

thank uh very much mam very helpful🤗🙏

[@Vaishnavi-ot6br]

thank you for your videos Dr.Noori. Whenever i have any doubt your videos clears it all real quick! I don't have to search for any other channels

[@engineeringclassesbydr.noo3377]

Thank u. Pls Like, Subscribe and share my channel with students .

[@priyanshusaini4701]

thanku so much mam i am so confused in these questions after watching ur videos its so simple to draw easily

[@TarunKumar-kf8bi]

Such a beautiful explanation

[@engineeringclassesbydr.noo3377]

Thank you. Share channel with Students.

[@devupallijayanth7879]

Thankyou very much mam,
Because of u im able to under stand the concepts of this engneering drawing....

[@engineeringclassesbydr.noo3377]

Good

[@user-bp2nj5og6f]

This video is very helpful for me

[@JasonLords-vw4lt]

Thank you very much

[@abhithapapani5849]

A very good explanation thankuuuuuu mam............ 💕

[@pcrmemes1828]

mam apne bhut accha samajya itna tu hamere ed wale sir 1 hr me karya tha
thank you
ple create more more video and sperate the gyan

[@engineeringclassesbydr.noo3377]

It's nice you are studying well. All the Best. Share my channel with students

[@rajithasamarla1605]

Thank you soooo much mam for this wonderful Explaination

[@paulaedet4222]

Thank you so much!!! You’re a true life saver!

[@engineeringclassesbydr.noo3377]

Thank you for nice compliment.
All the very Best.

[@mdlayeequllahqasmi4614]

Such a great explanation Thank you😊

[@bikkikumar485]

Thank you so much.

[@tarakpeddinti8138]

Medam plz do problems on inclination of traces and mid point .it will be very helpful for my exam

[@JustRealAsf]

You are the absolute best.

[@engineeringclassesbydr.noo3377]

Thank you.

[@vivekmalviya3036]

Thank u mam

[@NaveenKumar-fy5pl]

A straight line PQ has its end P 20 mm above H.P. and 30 mm in front of V.P. and the
end Q is 80 mm above the H.P. and 70 mm infront of the V.P. If the end projectors are 60
mm apart, draw the projectis of the line. Determine its rue length and true inclination with
the reference plane.

[@engineeringclassesbydr.noo3377]

Follow the same procedure as in video. It's a similar one.

[@venkateshguguloth7512]

Tq mam good explanation

[@katyayani3697]

Thank you mam

[@XcaliberrO07]

thank you mam.

[@engineeringclassesbydr.noo3377]

Share my channel with students

[@bharathkumarreddy9633]

Good explain mam

[@engineeringclassesbydr.noo3377]

Thank you. All the Best.

[@21yadav42]

4. A straight line PQ has its end P 20 mm above the H.P. and 30 mm in front of the V.P. and the end Q is 80 mm
above the H.P. and 70 mm in front of the V.P. If the end projectors are 60 mm apart, draw the projections of the
line. Determine its true length and true inclinations with the reference planes

[@vinayyelugu3609]

Simply Super👌

[@engineeringclassesbydr.noo3377]

Thank you.

[@gajagaruda8004]

Exdradinary explanation tq mam

[@engineeringclassesbydr.noo3377]

Thanks, share my channel with students

[@nanitechviews8774]

Tq so much mam

[@engineeringclassesbydr.noo3377]

Share my channel with your friends

[@sidhukarigari1778]

Thank you madam

[@engineeringclassesbydr.noo3377]

Share my channel with students

[@rameshpudi2336]

Very nice madam♥♥

[@engineeringclassesbydr.noo3377]

Share my channel with your friends

[@Emma-Dee]

What if the difference between projections isn't given?

[@engineeringclassesbydr.noo3377]

Take the given angles and true length of a line.

[@praveenmoses695]

It is like god sent you to save students 🥰🥰

[@engineeringclassesbydr.noo3377]

Very Nice & Big Compliment Praveen.Thank you very much.

[@SureshBabu-yx2ph]

Thank you very much madam. Your explanation is very good. It's easy to understand

[@engineeringclassesbydr.noo3377]

Pls share my channel with students

[@tamilarasan7679]

i'm also mam,thank you so much

[@engineeringclassesbydr.noo3377]

Share my channel with students, who are studying Engineering Graphics

[@509nandini7]

Mam can we apply grace marks for Engineering drawing subject

[@engineeringclassesbydr.noo3377]

Yes

[@sprrez]

Inclination aur lengths ke values 1-2 mm me differ krre hoge to marks katege kya?

[@engineeringclassesbydr.noo3377]

No

[@sprrez]

@@engineeringclassesbydr.noo3377 okay thankyou 🙏

[@M.durgakumari]

Please solve more problems mam

[@engineeringclassesbydr.noo3377]

Sure

[@animaqaar]

Mam apparent length aur apparent inclination kaise nikalte hain . Kal Mera exam h .🥺

[@engineeringclassesbydr.noo3377]

Apparent length and inclination means true length, true inclination (angle)

[@animaqaar]

@@engineeringclassesbydr.noo3377 thnkuh mam

[@quicklearner9598]

th-cam.com/video/RjnGtOaUcoY/w-d-xo.htmlsi=zKMS0B4xYO51yueX

[@yudhirkothari]

A line PQ has its end P, 10 mm above the HP and 20 mm in front of the VP.
The end Q is 35 mm in front of the VP and the front view of the line measures
75 mm. The distance between the end projectors is 50 mm. Draw the projections of the line and find its length and true inclination with HP and VP.
yee wala ma'am
urgently please 🥲

[@motosansar3213]

babbal

[@anjitapoudel]

ekdam ramro

[@anjitapoudel]

Spandan

[@naveenofficial3663]

Thank you mam

[@engineeringclassesbydr.noo3377]

Share my channel with students