I saw a Mustang assembly line working once. The engine and entire drivetrain go up from underneath on the K member and someone runs the K member bolts in and they were super fast about it. From there it only took them a minute or two to hook up the engine's wiring harness, coolant hoses and A/C lines and that engine was installed in a minute or two. Great video!
You do incredible work! I love all the extra steps you do like painting all the under hood components. That engine looks so good by paying attention to detail. Some one is going to buy a one kind well done Cobra. Cannot wait to see it when it is all done!
I ALWAYS SAID LOOKS WISE THE 96 98 COBRA MOTORS LOOK AWESOME AND THAT'S WHERE IT ENDS THE STOCK INTERNALS ARE JUNK LOL I KNOW LOL I HAD 20THOUSAND ORIGINAL MILES ON MY 97 COBRA AND RACING I MISSED A SHIFT AND THE BOTTOM END EXPLODED. LOL IN MY OPINION THE BEST VERSION OF THE 4.6 ARE THE ONLY 04 TERMINATORS LOL NO HEAD TICK AND NO ISSUES BUT SOME LITTLE THINGS BUT YOU COULDN'T GIVE ME A 96 98 COBRA.
I'm putting together a 96, trying to do a 3v swap. I really could have used that hydro boost that you guys scrapped. BTW love the work that you all do! keep up the good work!
next project ..... hmmm twin t85 blowers and a super charger on lil cobra engine ya just put in... a fun idea hopefully you all will think about it and do a before and after dyno on it
Hey guys, love your channel, great work, just wondering if you are done with this project, would love to see the end results, please post a video of it up and running, thanks for making this videos, I'm a mustang fan and I've learned a lot about them just by watching you guys, again thanks a lot!!
@@tkoresto wow sometimes you get a gift. I'm from Chrysler engineering and veh. Development and I'm over 70 but the little kid in me is alive and the mustang is good for good for me.
Very important question on my 1998 cobra I have a charging problem, found a plug that is connected from the alternator harness that is not connected and can not find where it goes into, maybe you can help I have pictures 👍
What's up guys. Quick question. When you swapped out the ABS unit did you use any special tools? Is there any special procedures that need to be done? I would like to swap mine. It got wet by a bad water pump and the light is now on. Thanks for any reply
do you know if u can just swap cobra heads on to a 2v gt is it easy as just bolting them on. its a 2000 mustang gt and i wanna get 2000 cobra heads or dohc heads any info would be great!!!
Hey I was wondering if you an help me with this code-I have p1131 -lack of ho2s11 switch sensor indicates lean and p0131-sensor circuit low voltage bank 1 sensor 1 (it's not the sensor I changed that sensor 100+miles ago). Any advice?
Could any S197 mustang have red interior? In 94-95, you could only get red interior on black, white, opal frost (silver) and Rio Red. You don’t want someone with a yellow mustang rolling around with red interior. You also don’t want something like that sitting on your lot forever.
cpstang24 i have the same problem my car stalls when i put it on drive or reverse it starts up fine i rapleced the tps sensor and still does the same crap long story short ive had problems with it since i drove it top speed its a 3.8 v6 lol
I have a 97 cobra 61, miles lazer red all black int leather great condition but wrecked in tha front end bags did deploy but I replaced tha driver bag I would like to sell but not too sure on tha price ASKING what y'all think would be a gd price to sell please message back!!!! Thanks
That is a tight fit!. I sent you guys a description of my mustang as you requested. Have not heard back. I really need to sell my 97 Mustang GT. Can you help me out?
I don’t think they’re a real business. I couldn’t find a website or phone number when I searched last year. Found an email one of them gave in the comments of a video here. Emailed them with pictures of my car asking for a full restoration quote. All I got back was a “thanks for the subscribe” and “how long have you owned the car”. That was April 2020
How bout pulln ur pants up and puttn a belt on before u start workn in front of the camera liek that? No disrespect man, im just sayn.. Besides that great work!!!
Amazing video , as always ! Hey guys , it's not a good idea to put poly bushings in the upper control arms ... Just install rubber ones there ... That "quadrabind" horrible ford's rear suspension project is very dangerous ... For more tech , check at Maximum Motorsports website ...
i think the motor looks like it has to many colors like a clown motor or somthing i think it would have looked much metter with either all blue or all green
I saw a Mustang assembly line working once. The engine and entire drivetrain go up from underneath on the K member and someone runs the K member bolts in and they were super fast about it.
From there it only took them a minute or two to hook up the engine's wiring harness, coolant hoses and A/C lines and that engine was installed in a minute or two. Great video!
you guys make it look way to easy 😀 great job I can't wait to see it finished
You do incredible work! I love all the extra steps you do like painting all the under hood components. That engine looks so good by paying attention to detail. Some one is going to buy a one kind well done Cobra. Cannot wait to see it when it is all done!
jmfut thank youuuu!
I ALWAYS SAID LOOKS WISE THE 96 98 COBRA MOTORS LOOK AWESOME AND THAT'S WHERE IT ENDS THE STOCK INTERNALS ARE JUNK LOL I KNOW LOL I HAD 20THOUSAND ORIGINAL MILES ON MY 97 COBRA AND RACING I MISSED A SHIFT AND THE BOTTOM END EXPLODED. LOL IN MY OPINION THE BEST VERSION OF THE 4.6 ARE THE ONLY 04 TERMINATORS LOL NO HEAD TICK AND NO ISSUES BUT SOME LITTLE THINGS BUT YOU COULDN'T GIVE ME A 96 98 COBRA.
Fantastic workmanship and pride ... Nicely done!
Its satisfying seeing how you guys always do a very clean and good job, keep up the good work!
poor cobra. Seen where you was parting it out on Craigslist. glad to see you back up loading
Great video as always, can't wait to see the finished product! Keep up the good work guys!
Ok I subscribed. I totaled my super clean 96 GT last year and really miss my it.
I'm putting together a 96, trying to do a 3v swap. I really could have used that hydro boost that you guys scrapped. BTW love the work that you all do! keep up the good work!
Chris Carter we had more in stock!
Underside looks better than my fox!
next project ..... hmmm twin t85 blowers and a super charger on lil cobra engine ya just put in... a fun idea hopefully you all will think about it and do a before and after dyno on it
wheres the other video showing you all finishing it and the starting it up parts?
Man. I should send you guys my 97 cobra. Just turned 33k. But would love it on the level of this car.
Hey guys, love your channel, great work, just wondering if you are done with this project, would love to see the end results, please post a video of it up and running, thanks for making this videos, I'm a mustang fan and I've learned a lot about them just by watching you guys, again thanks a lot!!
One thing about buying a Engine from a wreck is that they probably drove it there. So it at least runs.
Don Berry motor ended up being fully built. We found the guy that wrecked it in Tennessee.
@@tkoresto wow sometimes you get a gift. I'm from Chrysler engineering and veh. Development and I'm over 70 but the little kid in me is alive and the mustang is good for good for me.
right on bro u did it right I have the same engine and mine was put in from bottom to ....good motors bro
Really enjoy your music guys seems to flow with the work. It's cool
Very important question on my 1998 cobra I have a charging problem, found a plug that is connected from the alternator harness that is not connected and can not find where it goes into, maybe you can help I have pictures 👍
What's up guys. Quick question. When you swapped out the ABS unit did you use any special tools? Is there any special procedures that need to be done? I would like to swap mine. It got wet by a bad water pump and the light is now on. Thanks for any reply
Nice job great videos you guys coming down to Myrtle Beach for mustang week in september? Keep up the good work guys
mark fellows yes we are!!! This will be out 13th year at Mustang Week !!!
what did the car look like now
Dammm i wish you guys were in colorado i need help with doing a cobra swap on my sn95 you guys do an awesome job
Yo! Any vids coming out soon? Miss seeing what you guys are up to! Jim
why did yall quit making videos, i have a 95 gt 5spd, and this channel was my addiction!
Ira Wiley maybe an emergency came up or worse, hopefully nothing happened to someone.
Love your vids, as always keep them coming!
I take it the whole car will be BAB eventually?
btw I forgot to ask what is the music in the movie and at the end of the clip on the outtro?
do you know if u can just swap cobra heads on to a 2v gt is it easy as just bolting them on. its a 2000 mustang gt and i wanna get 2000 cobra heads or dohc heads any info would be great!!!
Was that a mystic cobra that y’all parted out
well thought out small shop. nice ;-)
Great Job, where did the back round music come from ???
Going to be like a new car
Whats the color code for this paint? By the way looks gorgeous!
Hey I was wondering if you an help me with this code-I have p1131 -lack of ho2s11 switch sensor indicates lean and p0131-sensor circuit low voltage bank 1 sensor 1 (it's not the sensor I changed that sensor 100+miles ago). Any advice?
great work you Guys do what is the color of the under body you did
Bright Atlantic Blue.
Darren Daniel ford paint code K7
Looks fantastic
OK, which one of you put the driver side LCA in backwards? :)
What color did this car end up being? Teal, red or blue?
Could any S197 mustang have red interior? In 94-95, you could only get red interior on black, white, opal frost (silver) and Rio Red. You don’t want someone with a yellow mustang rolling around with red interior. You also don’t want something like that sitting on your lot forever.
what was that red thing on the exhaust that you were gonna weld
Hi every bady , is cobra engine same 2004 termonitor engine ?
tko I need help my mustang shuts off while in neutral while in gear it's normal no problem I need help
Fernando Contreras idle air control is bad or throttle position sensor.. or you need to clean your MAF sensor
cpstang24 i have the same problem my car stalls when i put it on drive or reverse it starts up fine i rapleced the tps sensor and still does the same crap long story short ive had problems with it since i drove it top speed its a 3.8 v6 lol
don't forget to square up that k member it would make for a good video
How much for the caster camber plates?? I need those!
how much you are selling this beast for tyler looks killer
bekir kurt we will probably eBay it
i say you keep it
Another awesome video! Thanks for the content!
I have a 97 cobra 61, miles lazer red all black int leather great condition but wrecked in tha front end bags did deploy but I replaced tha driver bag I would like to sell but not too sure on tha price ASKING what y'all think would be a gd price to sell please message back!!!! Thanks
Great install guys!
That is a tight fit!. I sent you guys a description of my mustang as you requested. Have not heard back. I really need to sell my 97 Mustang GT. Can you help me out?
Ken J forward it one more time!!! I get quite a few a day. Hard to get track and keep up with you guys!
Will Do!
Hey.... guys I have a 96 cobra convertible....I want you to paint it please let me know cause i want The ready for a show august 12 please...
Jimmy Alves email me tkoresto.tk@gmail.com
tko resto i did already with all muy info
How much would you charge to paint an 02 GT?
any new vids coming? thanks
awesome work....
Tengo un ford mustang cobra 98 nesesito que me agan ustedes un trabajo donde esta su ofisina del negosio para llevarles mi ford mustang
Looking good!
15:13 I'll refrain from making the 1 JayZee meme reference here... haha
Great work on the car, cool video, but the music is like the soundtrack to a bad dream.
What mm throttle body is on that for 4.6?
What color are these valve covers?
Why are you putting a '98 engine in a '96? Aren't they the same?
how come no new videos?
blue stanger sweet
Where are you guys located?
I need some work done,how do i vet a hold of you?
I don’t think they’re a real business. I couldn’t find a website or phone number when I searched last year. Found an email one of them gave in the comments of a video here. Emailed them with pictures of my car asking for a full restoration quote. All I got back was a “thanks for the subscribe” and “how long have you owned the car”. That was April 2020
Correction: I’ve been waiting to hear back from them since April 2019 not 2020. I sent three emails. It is June 2020 as I write this.
Gorgeous engine bro! When are you going to key west,i live 4hrs from there,lol. Glad Samantha showed up at the end
Morbid SVT COBRA we are headed down June 10th
Dam i work that saturday,that sux. But i work at 3pm and i think cars and coffee miami is that saturday at 8-11am,maybe u can make that.
How bout pulln ur pants up and puttn a belt on before u start workn in front of the camera liek that? No disrespect man, im just sayn.. Besides that great work!!!
i would have keep that front 98 clip
what happening to the videos
Amazing video , as always ! Hey guys , it's not a good idea to put poly bushings in the upper control arms ... Just install rubber ones there ... That "quadrabind" horrible ford's rear suspension project is very dangerous ... For more tech , check at Maximum Motorsports website ...
i think the motor looks like it has to many colors like a clown motor or somthing i think it would have looked much metter with either all blue or all green
413 boosted wait until it's complete! Might change your mind
Gloss paint on anything but the exterior is WRONG! semi gloss aka satin is better..
Too much gloss