Hi. Im wondering if a 470mm spring fits in with no problems? My shop has available 4.3NM 465mm spring, and one stiffer one 4.6NM 470mm. I'd need a stiff one for road use.
I tried some Factory Connection springs and they rubbed the inside of the lower fork tubes so bad that it turned the oil silver from all the metal shavings. I had to buy all new bushings and seals, and polish out the inner and outer fork tubes. The anondizing looks ok now but I wonder how much damage was really done in there as it's hard for me to see in there. 2010 250sx....
hello jeff,i have a 2004 ktm 200 and im way too small for it,is there spacers i can take out of the forks to lower the bike,i only geen lane by the way im not jumping it?
Love it Jeff... and Kids pay attention... DON"T cheap out. Words to live by.
Super nice video in explaning how to adjust this new fork.
What preload do you recommend setting them at Jeff?
Thanks Jeff. Love these.
Hey Jeff. Can you tell me what size fork seal drivers, fork seal bullets I need to service the 4CS fork? Thank you for the expertise.
Hi. Im wondering if a 470mm spring fits in with no problems? My shop has available 4.3NM 465mm spring, and one stiffer one 4.6NM 470mm. I'd need a stiff one for road use.
I tried some Factory Connection springs and they rubbed the inside of the lower fork tubes so bad that it turned the oil silver from all the metal shavings. I had to buy all new bushings and seals, and polish out the inner and outer fork tubes. The anondizing looks ok now but I wonder how much damage was really done in there as it's hard for me to see in there. 2010 250sx....
hello jeff,i have a 2004 ktm 200 and im way too small for it,is there spacers i can take out of the forks to lower the bike,i only geen lane by the way im not jumping it?
Is there a possibility to make it 50mm lower ? (Scrambler project with fe 501 )
Sure.
What technique do you suggest?
Muy bueno aprender
48mm