I knew someone would get my silly humor 🤣 Thank you!! But it's true. It reminds me of when I was little and I was afraid of the dog next door. My mom would tell me the "dog can smell your fear, so be fearless". I remember laying in bed at night thinking that do could smell my fear, 🤣🤣 so I would suck it up and not be afraid. I do believe the serger is the same...so we need to show it who's boss. Thank you again for being here.
@@SookieSews Yeah, the dogs can smell our fear! That was the most scary part of the dog business. So, you certainly go my attention, when you said that sergers can smell my fear. hahahahaha Thanks for your good work.
I put a black marker dot on the tiny raised line on the foot. I think I'm going to use black nail polish instead because that mark disappears after a while. I've also added lined tape (for quilting) to the bed to help guide it. I have an old Babylock 5280D from the 90s. It still works perfectly. Great tips!
Love the black marker idea, but too bad it removes quickly. Once I was told to use model airplane (or model car) paint. I've not personally tried, but since it is oil based, it supposedly doesn't rub off. Might be worth a try if it's easy to find a small bottle. Glad your serger from the 90s still works. Love hearing that.
Yes, my L890 presser feet have notches! I found a great help was to highlight the right needle notches with one color and the left needle notches with a different color of permanent marker.😊
That's a nice serger -- I've heard good things about it. Plus if I'm not mistaken, it has markings on the door of the machine for Seam Allowance in addition to the foot.
You can thread a needle and pull ¾" surged thread through or use a crochet hook to pull. At the beginning, you can sew about ½" down, stop and take the serged thread and place it in front of the needles; continue serging 🙂
So glad you're enjoying. OHH good question and I promise to go into more of that in up coming videos. Make sure you're subscribed to my channel plus save the Playlist of the Year of the Serger, this will help th-cam.com/play/PLbwpCJXJ_Jr4dK5TieKHL5A338ygco0jr.html&si=5q-LVcDyyMsYNL35 But the short answer is this. If the seam will end up inside another seam...don't worry--just clip the thread tail and move forward. If the thread tail will be exposed (like a napkin edge) then there are a couple of simple ways to prevent from unraveling. One-Seam Sealant (like Fray Check) then clip the thread tail close after it has dried and Two-Feed the thread tails under the backside of the stitch.
Those markings on your foot are wonderful! They will truly come in handy especially as we get into projects soon!! Hey and old is good. That’s what I keep telling my teenager when she says I’m old 😆
Lightbulb moment.. !! Thx for this video. I have the Baby Lock Vibrant which has the notches but I never understood or had anyone explain how it works..specifically, if i want to ckt a 1\2" seam a!lowance, how do confirm it?? When you show taking the cut off section and putting it next to the serged portion, it made perfect sense..if I don't have a chance to learn anything else today, I'm dancing on a cloud!!!!😅🎉❤
I’ve been aware of the challenge of getting the seam allowance correct and struggling to figure it out. I have the L 890. I’m aware of the markings on the foot but I’ll make sure to try the guide.
Sounds like you were able to take away some good stuff from the video. Try it out and get back to me letting me know if it was helpful. You've got a lovely machine :)
I own the Bernette b64 airlock serger. Is there a seam guide for this machine? I don’t see any markings on the machine itself so I never know if I’m serging my seams correctly. Any suggestions? Thank you 😊
Bernina 1300 DC (yes, it’s old) has raised ridges on the presser foot, but they are hard to see when you’re sewing. The machine has a plastic, rounded part to the right of the presser foot that has width markings, but it’s too far away from where you need it to be helpful. My manual said there was a seam guide available but my dealer could not find one for me. I was never able to use the serger to make anything that required an accurate seam allowance. It was great for infinity scarves, though. I just use it now for serging raw edges before prewashing fabric.
If you have some woven (not printed) gingham fabric remnants that are 1/8” or 1/4” apart, try using them to practice seam allowance & trimming. It was very helpful when I was just starting with my serger. Striped fabric scraps were good for learning, too. After I serged (usually 6” - 8” long seams), I’d take a look at the seam AND the fabric that had been trimmed off - amazingly helpful to see how straight my seam was compared with the stripes or the gingham plaid.
Too bad about not getting the seam guide for your serger-kind of like when my favorite lipstick shade was discontinued by Estée Lauder! Companies always seem to move on to new things. But don’t let that hold you back! Even without a seam guide, try the tape method or read through some of the comments here as there were some great suggestions. Your 1300 DC can do way more than just finishing edges-I’d love to see you put it to work on some fun projects! Please keep following along for more serger goodness :)
@@mcmccoy1184 What an excellent idea. Sounds as if I need to make a "hacks" video on seam allowance in the future. Thanks for sharing your ideas with others.
Those notches really will come in handy...especially the Blade groove to the far right. I use that when I'm doing a lot of flatlock stitching. Thanks for sharing.
Oh I loved my Babylock Imagine, had it back in 2000 I think, probably one of the original Imagines. It was my first air-threading serger and I was quite literally blown away when I first saw it demonstrated.
@SookieSews I saw a video that the ads at the beginning and end of a video belong to TH-cam. The middle advertisements are the ones you receive advertisement money from. The comment may sound rude but I don't mean it that way
@@Barbara-iz7bp I appreciate your feedback! I always aim to provide the best content possible, and I hope you found the tutorial helpful. Thanks for watching!
Download the Hello Serger Mini Handbook here bit.ly/3WjlElE
Sergers can smell fear 😅 😂 I break out in a sweat every time I use it..... Thank you for the tutorial.
I knew someone would get my silly humor 🤣 Thank you!! But it's true. It reminds me of when I was little and I was afraid of the dog next door. My mom would tell me the "dog can smell your fear, so be fearless". I remember laying in bed at night thinking that do could smell my fear, 🤣🤣 so I would suck it up and not be afraid. I do believe the serger is the same...so we need to show it who's boss. Thank you again for being here.
I also started smiling. So, I better get my act together, and stop being so scared of my serger. LOL
@@SookieSews Yeah, the dogs can smell our fear! That was the most scary part of the dog business. So, you certainly go my attention, when you said that sergers can smell my fear. hahahahaha Thanks for your good work.
😂🤣😅👍🏻👍🏻
Thanks so much for explaining the serger to me. I have a Brother 1034DX. So far I am using it to finish Sean’s, but want to do more with it. 😊
I put a black marker dot on the tiny raised line on the foot. I think I'm going to use black nail polish instead because that mark disappears after a while. I've also added lined tape (for quilting) to the bed to help guide it. I have an old Babylock 5280D from the 90s. It still works perfectly. Great tips!
Love the black marker idea, but too bad it removes quickly. Once I was told to use model airplane (or model car) paint. I've not personally tried, but since it is oil based, it supposedly doesn't rub off. Might be worth a try if it's easy to find a small bottle. Glad your serger from the 90s still works. Love hearing that.
My serger is a Bernina 2000DE and has markings on the foot, plate and cover.
Yes, my L890 presser feet have notches! I found a great help was to highlight the right needle notches with one color and the left needle notches with a different color of permanent marker.😊
That is a great idea! Thank you for sharing, hopefully others will see your comment :)
Thank you! This was very helpful!
Thank you for your kind words. I do try my best :)
Thank you - excellent video! Super helpful.
I have a Betnette B68 and it has notches
Thank you so much for sharing. I have a Brother 1034D....
That's a nice serger -- I've heard good things about it. Plus if I'm not mistaken, it has markings on the door of the machine for Seam Allowance in addition to the foot.
@@SookieSews yes it does have the markings, so I just need to be brave and serge ahead 🤷🏾♀️
I have the Bernina L 890 and use the guide and markings on the feet. I’m enjoying your videos!! Thank you for doing this.
You are so very welcome! Lovely machine that L890 :)
How do you finish the end without it unraveling?
Great information, thanks.
You can thread a needle and pull ¾" surged thread through or use a crochet hook to pull.
At the beginning, you can sew about ½" down, stop and take the serged thread and place it in front of the needles; continue serging 🙂
So glad you're enjoying. OHH good question and I promise to go into more of that in up coming videos. Make sure you're subscribed to my channel plus save the Playlist of the Year of the Serger, this will help th-cam.com/play/PLbwpCJXJ_Jr4dK5TieKHL5A338ygco0jr.html&si=5q-LVcDyyMsYNL35 But the short answer is this. If the seam will end up inside another seam...don't worry--just clip the thread tail and move forward. If the thread tail will be exposed (like a napkin edge) then there are a couple of simple ways to prevent from unraveling. One-Seam Sealant (like Fray Check) then clip the thread tail close after it has dried and Two-Feed the thread tails under the backside of the stitch.
This has to be one of my biggest reason for not using my serger......getting the correct seam allowance
I know right?? So many others feel the same way and once you practice and figure it out...you will be golden. Save this video for future reference.
@@SookieSews It's absolutely saved as a reference ......much appreciated
I needed this video, I havent used my serger yet . I hsve the Brother ST4031 HD.
Also i am having a problem downloading your serger mini book Thanks
Oooh!!! Love the clip on seam guide option! I have a Kenmore (😮 old! But still working!) serger with markings on the presser foot.
Those markings on your foot are wonderful! They will truly come in handy especially as we get into projects soon!! Hey and old is good. That’s what I keep telling my teenager when she says I’m old 😆
thank you for your instruction!!!!
You’re so welcome. Glad you’re enjoying!
Lightbulb moment.. !! Thx for this video. I have the Baby Lock Vibrant which has the notches but I never understood or had anyone explain how it works..specifically, if i want to ckt a 1\2" seam a!lowance, how do confirm it?? When you show taking the cut off section and putting it next to the serged portion, it made perfect sense..if I don't have a chance to
learn anything else today, I'm dancing on a cloud!!!!😅🎉❤
Forgive my typos😂
I’ve been aware of the challenge of getting the seam allowance correct and struggling to figure it out. I have the L 890. I’m aware of the markings on the foot but I’ll make sure to try the guide.
Sounds like you were able to take away some good stuff from the video. Try it out and get back to me letting me know if it was helpful. You've got a lovely machine :)
I own the Bernette b64 airlock serger. Is there a seam guide for this machine? I don’t see any markings on the machine itself so I never know if I’m serging my seams correctly. Any suggestions? Thank you 😊
Bernina 1300 DC (yes, it’s old) has raised ridges on the presser foot, but they are hard to see when you’re sewing. The machine has a plastic, rounded part to the right of the presser foot that has width markings, but it’s too far away from where you need it to be helpful. My manual said there was a seam guide available but my dealer could not find one for me. I was never able to use the serger to make anything that required an accurate seam allowance. It was great for infinity scarves, though. I just use it now for serging raw edges before prewashing fabric.
If you have some woven (not printed) gingham fabric remnants that are 1/8” or 1/4” apart, try using them to practice seam allowance & trimming.
It was very helpful when I was just starting with my serger.
Striped fabric scraps were good for learning, too. After I serged (usually 6” - 8” long seams), I’d take a look at the seam AND the fabric that had been trimmed off - amazingly helpful to see how straight my seam was compared with the stripes or the gingham plaid.
Well now you can use these tips. And you can always make a few markings on your fabric.
And rolled hems should still be a nonissue.
Sharpie permanent markers makes a very thin marker, you might be able to use this to darken your guidelines
Too bad about not getting the seam guide for your serger-kind of like when my favorite lipstick shade was discontinued by Estée Lauder! Companies always seem to move on to new things. But don’t let that hold you back! Even without a seam guide, try the tape method or read through some of the comments here as there were some great suggestions. Your 1300 DC can do way more than just finishing edges-I’d love to see you put it to work on some fun projects! Please keep following along for more serger goodness :)
@@mcmccoy1184 What an excellent idea. Sounds as if I need to make a "hacks" video on seam allowance in the future. Thanks for sharing your ideas with others.
I have a Bernina L 890 and there are notches on the foot
Those notches really will come in handy...especially the Blade groove to the far right. I use that when I'm doing a lot of flatlock stitching. Thanks for sharing.
i have markings on my presser foot and i have a guide. i have a babylock vibrant
I've heard very nice things about your serger!! What sort of a guide do you have? Is it built in or attach?
@@SookieSews its removable
I'm so excited to see this.....ok....back to the video 📹
You crack me up!! Sounds like you are enjoying the video. Literally that makes my heart happy!! Thank you
@SookieSews lol.....yes very much so.......I suffer from "serger intimidation" 🤦🏾♀️
Baby Lock Ovation has notch on presser foot
Die Übersetzung ist ja, aber der Ton der Original ist viel zu laut.
Not sure what you intended to say, Google translated it to not understand. Sorry. Happy to help if you can translate to English
Baby Lock Imagine and yes markings
Oh I loved my Babylock Imagine, had it back in 2000 I think, probably one of the original Imagines. It was my first air-threading serger and I was quite literally blown away when I first saw it demonstrated.
I have the cover stitch too. I purchased the Imagine in 2000 and the cover stitch was a gift for sales competition about ten years ago.
@@pamelagraham3100 Gift is even better :)
BL Acclaim. Yes it has notches
Excellent, I have heard very good things about your serger
Nice instruction but 3 adds in an 8 minute video is a bit excessive.
Thank you! Yeah, TH-cam likes to place their ads.
@SookieSews I saw a video that the ads at the beginning and end of a video belong to TH-cam. The middle advertisements are the ones you receive advertisement money from. The comment may sound rude but I don't mean it that way
@@Barbara-iz7bp I appreciate your feedback! I always aim to provide the best content possible, and I hope you found the tutorial helpful. Thanks for watching!