great video brother thank you, I am currently installing mechanical pump on my TD27ETI and you helped me a lot. your English and explanation was very good, I understood the whole video well.
Great video my friend , I have to pull the pump out of my D21 . The teeth are angled and the slot is called a key way , your English is very good .keep up terrrano videos coming 👍👍
Greetings from Portugal, thank U for your share. My actual project is converting a '88 atmospheric D21 TD25 to turbo.I'm trying to learn how to swap from the original pump no lda to the pump that i bought with lda 1670080G07 from the Terrano II TD27. Other parts already mounted since i ve been collecting spares from 2 Terrano II i owned from last 20years.Hope that the pulley is the same with no issues has you prevent us with your video. Your video was very helpful, thank U very much. Best regards
Привет илья "Я хочу установить плунжер электрического насоса на механический топливный насос и мне интересно, нужно ли менять эту деталь( ексцентрик), или можно оставить ту, что на механическом насосе?"
Hi my friend.Let me know please,what is i crank the engine without the pulley and the mark that is on flywheel dissapear? Should i check the piston in 1st cylinder or there are some marks on the engines pulley ?
You are td27 guru i think. I have searched a lot to answer my 1 question and i hope youcan help me... What i can do and how to my td27 (turbo intercooler mechanical pump) to gain some more horses.fuel increase and boost is what everyone say but how to do right no one knows...i hope you reply...nice video man, keep it up
@@-jellunissanterrano8235 hey man.i will rebuilt my engine soon and i want to ask you if you do you have an Instagram or Facebook account in case i need more info.
Thanks for the good video, and good effort with the English. Do you know if the TD27 turbo engine has a diesel screen filter in the injector pump? My car (Nissan Terrano, approx 1990) runs rough with white smoke, very low power, but revs higher when pumping the manual diesel pump on top of the main diesel filter. It's as if the fuel can't get through something blocking the way. I changed the main diesel filter, but no change.
Hi I need to know if I change to a mechanical pump I need to change the injectors too or the one of the electronic pump are good to use Thanks Jonathan
No, you don't need to change injectors. they are the same. but injectors on mechanical pump sets on 105-115 bar, and electronic pump injectors sets on 130 bar.
Hi how are you? I found an injector pump for my 2.7 TDI but I need to send you some photos of it so you can help me identify some parts on the pump because I don't have that much information about that pump where I can send you the photos please Thanks Jonathan
Hi there, Thanks a lot for this illustrative video. I have a Nissan Terrano 2 / Ford Maverick with this transformation and all runs fine except the tachometer, which reads a higher rpm than it actually is. I believe that the tachometer signal in the new setup with mechanical pump is coming from the alternator and this is slower than the original signal coming from electronic fuel pump. Did you find this minor but annoying problem in your transformation? spasibo
I think on td27eti tachometer take signal from crankshaft position sensor, which is on engine front lobe above the pump or on the top of transmission bell
Hey, did you solve the tachometer problem? Because I am thinking to change the electronic pump with a mechanical one this month and generally speaking I don't like messing with the electronic system of this car. One time the speedometer was not working properly due to the rusted connectors and it made the radio volumes change during gas pedaling. :) My car's 2004, tdi 2.7, I think Spain manufactured...
Hi again if I don't find a nissan terrano mechanical fuel injector pump because it is not easy to find one here, can I fit another pump from a different car please. Thanks Jonathan
Well i know only nissan pumps terrano/pathfinder wd21, pick up/ king cab. Urvan/caravan, atlas. That's the models of nissan with td 23, td25, td27 engines with mechanical pump
@@BrunoSilva-yx8ri On old TD27T with mechanical pump that sensor installed under Fuel pump pulley in alluminium plate. and counts the speed of the teeth of the pulley
Help how? Original Terrano 2 2.7 TDI with Mechanical pump 2000+ was rare. Or you want to install mechanical pump instead electronical . what's the question?
@@-jellunissanterrano8235 yes I have the electronical pump on my terrano and I want to change it to manual.. so which car model fuel pumps are suitable for terrano 2.7 2004 do you know?
Hi i have a td27ti engine and i want to know if you install electronic pump on engine the pulley fits perfect like you show with mechanical pump and pulley. Because is hard to match then zz marks on this td27ti and i have to move crankshaft to can match the z marks.
I actually don't understand, you want to install mechanical pump on td27eti? If you want to install it, you should better use mechanical pump pulley and install z against zz marks. if you want to install mechanical pump with electronic pump pulley, you should shift z mark on one teeth
@@-jellunissanterrano8235 no, im.asking to install the electronic pump back on td27ti, if the marks fits straight in. Because is hard time to get the correct position
Thank you, just what I'm looking for. What else would I need to do to my Mitsubishi Shogun Sport 2005, to convert it to run on a mechanical injector pump? Thanks in advance.
@@bravo20ghost27 on mechanical transmisson northing. on automatic transmission need to install trottle position sensor and make automatic control unit friendly to him))
great vid mate. i am swapping a TD27 manual vehicle to a TD27T complete motor swap diner cat was a automatic. the TD27T has a TPS but the vehicle its going into is only wired for the TD27 fuel cutoff and throttle stop solenoid. can i just ignore the TPS wiring loom thanks
And on qd32eti you should install 11 millimeter plunger pair instead 10 millimeter, that installed on td27t mechanical pump. If you use td27t mechanical pump.
@@joshut4065 If you want to install mechanical pump from atmosphere qd32, you'll have a problem. Because atmo pump doesn't have turbo corrector, that add fuel, when turbo boosts.
I remove electronic injector pump then replace manual injector pump now the automatic gearbox is not shifting the gears for dutro what can be the problem
Mechanical pump had Trottle position sensor (TPS) on the top? that help electronic control unit of gearbox to see the engine speed. on electronic injector that TPS is inside electronic head of pump. I guess your pump don't have tps on top of pump, or you don't know how to to integrate into original wiring.
Yes, sure . But the plunger pair will need to be replaced from qd32eti pump and some other inside parts. And after that it should be adjusted on the fuel stand under the qd32eti nozzles. Because nozzles on qd32eti works on 130-140 bar against 105-115 bars on td27T. Or you should find QD32T mechanical fuel pump from Nissan Atlas, or Nissan Caravan
Илия my brother can you help me with something ,i am tinking of buying terrano 2.7 td 101 horse power but it doesn't have an AC an i am thinking of installing it from terrano 2 2.7 125 hp .Is it visible and can you give me advance on the procedure спасиба братле
@@goshogosho8368 Well, i don't remember, crankshaft pulley trickle for condition may have another departure on TD27Eti. But i may be wrong. I think you can install it? if you'll have full set
Needed this video 3 months ago i just had electronic pump rebuilt for QD32ETI terrano
great video brother thank you, I am currently installing mechanical pump on my TD27ETI and you helped me a lot. your English and explanation was very good, I understood the whole video well.
Thanks brother from Australia more help than local Nissan dealers 👍🏻😍👌
Glad to help
Awesome vid! Very helpful thank you and your English is very good you don't need to worry👌
Tranks)
good english,now i know how to take pump out
glad that i can help you
Great video my friend , I have to pull the pump out of my D21 . The teeth are angled and the slot is called a key way , your English is very good .keep up terrrano videos coming 👍👍
Thanks
Greetings from Portugal, thank U for your share.
My actual project is converting a '88 atmospheric D21 TD25 to turbo.I'm trying to learn how to swap from the original pump no lda to the pump that i bought with lda 1670080G07 from the Terrano II TD27. Other parts already mounted since i ve been collecting spares from 2 Terrano II i owned from last 20years.Hope that the pulley is the same with no issues has you prevent us with your video.
Your video was very helpful, thank U very much. Best regards
Muaaaaa
Привет илья "Я хочу установить плунжер электрического насоса на механический топливный насос и мне интересно, нужно ли менять эту деталь( ексцентрик), или можно оставить ту, что на механическом насосе?"
Great video. i want to install a td27 injector pump on zd30 will it work
Hi my friend.Let me know please,what is i crank the engine without the pulley and the mark that is on flywheel dissapear? Should i check the piston in 1st cylinder or there are some marks on the engines pulley ?
Brilliant. I had the wrong pulley . Top man ☺
You find a problem? It help you to solve it?)
Thanks for help.
You are td27 guru i think. I have searched a lot to answer my 1 question and i hope youcan help me... What i can do and how to my td27 (turbo intercooler mechanical pump) to gain some more horses.fuel increase and boost is what everyone say but how to do right no one knows...i hope you reply...nice video man, keep it up
Increase fuel preasure to 140 bar, install 11 or 12 plunger plug and change plunger lifting height to 0.275 or maybe 0.2. and increase boost.
@@-jellunissanterrano8235 hey man.i will rebuilt my engine soon and i want to ask you if you do you have an Instagram or Facebook account in case i need more info.
Where i could possibly find a 12 mm plunger plug. Is it fit from another car?
Thanks for the good video, and good effort with the English. Do you know if the TD27 turbo engine has a diesel screen filter in the injector pump? My car (Nissan Terrano, approx 1990) runs rough with white smoke, very low power, but revs higher when pumping the manual diesel pump on top of the main diesel filter. It's as if the fuel can't get through something blocking the way. I changed the main diesel filter, but no change.
One filter is in plunger pair. the second is under bolt for fuel supply in front of injector pump. Or it's air getting through the rubber ring.
@@-jellunissanterrano8235 вроде на электронных td27eti нет маленькой металлический сетки на топливо насосе ? На атласе у меня был на td27
@@jdmcarandmotorcycle Да, увы. только самому если ставить
Hello, where connect the black and red cable from pump? Thank you
Hey man. Great work. Where i could find a 11mm or 12 mm plunger plug for my pump so i could upgrade it?
Yes, but maybe need to change wave Washer
Hi I need to know if I change to a mechanical pump I need to change the injectors too or the one of the electronic pump are good to use
Thanks
Jonathan
No, you don't need to change injectors. they are the same. but injectors on mechanical pump sets on 105-115 bar, and electronic pump injectors sets on 130 bar.
Thanks so much for replying to me very helpful.
you 're welcome
Hi how are you? I found an injector pump for my 2.7 TDI but I need to send you some photos of it so you can help me identify some parts on the pump because I don't have that much information about that pump where I can send you the photos please
Thanks
Jonathan
I,like vido,
I,rikues mekanikal pum nisan cd 30 thak.
Salam i, from indonesia
Hi there, Thanks a lot for this illustrative video. I have a Nissan Terrano 2 / Ford Maverick with this transformation and all runs fine except the tachometer, which reads a higher rpm than it actually is. I believe that the tachometer signal in the new setup with mechanical pump is coming from the alternator and this is slower than the original signal coming from electronic fuel pump. Did you find this minor but annoying problem in your transformation? spasibo
I think on td27eti tachometer take signal from crankshaft position sensor, which is on engine front lobe above the pump or on the top of transmission bell
Hey, did you solve the tachometer problem? Because I am thinking to change the electronic pump with a mechanical one this month and generally speaking I don't like messing with the electronic system of this car. One time the speedometer was not working properly due to the rusted connectors and it made the radio volumes change during gas pedaling. :) My car's 2004, tdi 2.7, I think Spain manufactured...
Excelente!!!
Hi again if I don't find a nissan terrano mechanical fuel injector pump because it is not easy to find one here, can I fit another pump from a different car please.
Thanks
Jonathan
Well i know only nissan pumps terrano/pathfinder wd21, pick up/ king cab. Urvan/caravan, atlas. That's the models of nissan with td 23, td25, td27 engines with mechanical pump
Hi Leah, did you lost rpm gauge with conversion for mechanical pump?
Yes sure. I've lost it)
@@-jellunissanterrano8235 maybe there’s a way to get them back, the electrical pump has a sensor at the side, im wondering were can I install it
@@BrunoSilva-yx8ri On old TD27T with mechanical pump that sensor installed under Fuel pump pulley in alluminium plate. and counts the speed of the teeth of the pulley
Hello Thanks for your video, can you help me which car mechanical fuel pumps are available for Nissan terrano 2.7 2004
Help how? Original Terrano 2 2.7 TDI with Mechanical pump 2000+ was rare. Or you want to install mechanical pump instead electronical . what's the question?
@@-jellunissanterrano8235 yes I have the electronical pump on my terrano and I want to change it to manual.. so which car model fuel pumps are suitable for terrano 2.7 2004 do you know?
@@nikagugeshashvili1084 Terrano 1 wd21 90-95 year, terrano 2 R20 93-96 , nissan pick-up td27 turbo. buy only with original gear
thank you Ilia
Hi i have a td27ti engine and i want to know if you install electronic pump on engine the pulley fits perfect like you show with mechanical pump and pulley.
Because is hard to match then zz marks on this td27ti and i have to move crankshaft to can match the z marks.
I actually don't understand, you want to install mechanical pump on td27eti? If you want to install it, you should better use mechanical pump pulley and install z against zz marks. if you want to install mechanical pump with electronic pump pulley, you should shift z mark on one teeth
@@-jellunissanterrano8235 no, im.asking to install the electronic pump back on td27ti, if the marks fits straight in. Because is hard time to get the correct position
@@miguelfigueroa326 use original td27eti pulley, install marks z - zz and turn fuel pump off the engine a little.
Thank you, just what I'm looking for.
What else would I need to do to my Mitsubishi Shogun Sport 2005, to convert it to run on a mechanical injector pump?
Thanks in advance.
i'm good in nissan terrano) mitsubishi is not my area. I don't know that car))
@@-jellunissanterrano8235 ok, thank you. What else did you have to do on your car to have it fully running on that mechanical pump?
@@bravo20ghost27 on mechanical transmisson northing. on automatic transmission need to install trottle position sensor and make automatic control unit friendly to him))
@@-jellunissanterrano8235 thank you
Greetings from texas!
Greetings from Russia, Moscow)))
Great collection may have to use you for information on the td27 since I inherited 3. Two are turbocharged
Nice for that
great vid mate. i am swapping a TD27 manual vehicle to a TD27T complete motor swap diner cat was a automatic. the TD27T has a TPS but the vehicle its going into is only wired for the TD27 fuel cutoff and throttle stop solenoid. can i just ignore the TPS wiring loom
thanks
Hello,If I have td27ti 92kw Bosh electric fuel pump ,have it 11mm rotor head /plunger lifting too ? thaks for advice
as i know bosch pump have 10mm rotor head
When changing eti to manual can you use the eti injectors?
Yes. They are ,manual too. only first have sensor. but it's manual.
will you make a video on how to install sd23 inline injection pump into td27
Sorry, i haven't seen that message. I haven't any sd23 pump, so i don't think it's possible
Nice to know, keep this way
Thanks)
Nice vid 👍🏾
THX
Woodruff key not in correct postion. Turn the pump a fraction.
Hello is this the same problem with the qd32eti to install a mechanical pump ?
The same, but maybe it could be different amount of splines
And on qd32eti you should install 11 millimeter plunger pair instead 10 millimeter, that installed on td27t mechanical pump. If you use td27t mechanical pump.
Илья - Jellu о Nissan Terrano I have a mechanical pump from a qd32 and I am installing it on to a qd32eti
@@joshut4065 If you want to install mechanical pump from atmosphere qd32, you'll have a problem. Because atmo pump doesn't have turbo corrector, that add fuel, when turbo boosts.
@@-jellunissanterrano8235 🤔🤔 I think this is my problem. I used a qd32NA injector. I don't really feel the turbo.
I remove electronic injector pump then replace manual injector pump now the automatic gearbox is not shifting the gears for dutro what can be the problem
Mechanical pump had Trottle position sensor (TPS) on the top? that help electronic control unit of gearbox to see the engine speed. on electronic injector that TPS is inside electronic head of pump. I guess your pump don't have tps on top of pump, or you don't know how to to integrate into original wiring.
will a td27eti pump work on a qd32eti
Yes, sure . But the plunger pair will need to be replaced from qd32eti pump and some other inside parts. And after that it should be adjusted on the fuel stand under the qd32eti nozzles. Because nozzles on qd32eti works on 130-140 bar against 105-115 bars on td27T. Or you should find QD32T mechanical fuel pump from Nissan Atlas, or Nissan Caravan
ah sorry. td27eti pump, not mechanical. I think zexel td27eti pump can work on qd32eti, but without correction it won't work good.
do you have a spare tps sensor?
I don't use tps, it's not necessary with manual transmission.
Илия my brother can you help me with something ,i am tinking of buying terrano 2.7 td 101 horse power but it doesn't have an AC an i am thinking of installing it from terrano 2 2.7 125 hp .Is it visible and can you give me advance on the procedure спасиба братле
You doesn't have what? AC? What that means?
@@-jellunissanterrano8235 air conditioning for terrano
@@goshogosho8368 Well, i don't remember, crankshaft pulley trickle for condition may have another departure on TD27Eti. But i may be wrong. I think you can install it? if you'll have full set
Thanks man
This information is very helpful for me .
@@goshogosho8368 You're welcome
Your english understandable...do you have facebook? Need ti contact you for some information..thank you
I don't use facebook. But I have whatsapp, or instagram
@@-jellunissanterrano8235 ok, what is your Instagram name?