Select the group DCA1-8 button near the faders. Hold it down and faders 1 & 2 will have arrows. The Matrix 1-6 button will will bring up the transport options. Stop, Play, Return to zero, Reworn, & F.F
This really helped. Thanks. I was disappointed at first when I thought I could only control the first 8 channels of studio one, but your comment helped me out big time. Thanks.
@@dogefresh2 The best part is bringing a full session track for track back to the board from studio one. All of the effects come as well and then you can still add the power of the boards efx.
All audio from your daw will default to aux 1&2 on your console. In order to get it back track for track the way it went in if you truly want that hybrid mixing setup then... Go to your Input/Output section on the mixer screen for the session you have .Then create the amount of tracks you need. Go to back to the mix screen and go to the sends. Select the corresponding sub track for track... Sub 1, Track 1 so forth. And BOOM!!! Good Luck!👈🏾💪🏾
This video has been a great help for me. I was considering purchasing an iostation 24c by presonus to utelize the faderport features as well as the audio interface, especially for writing automation. Now that I got my x32 producer to control the faders and transport of studio one, I don't need the iostation 24c anymore. Thanks for the video.
Dude, thank you. I was trying to help a buddy set one of these X32s up with Studio One about 6 months ago, and I just couldn't get playback running for love or money. Thank you so much!
Thank you for your video! I need some more help though. Lol. I have an x32 digital rack so the settings under setup-remote are different. I can’t seem to find any x32 rack videos on set up for FL/Studio One.
congratulations, I need help I have the producer but I can't set it let me explain... in the CARD / LOCAL / AES A / BUS / routing how should they be set? then the whole SETTING part / communication with Studio one 6 in practice I would like to use it in remote DAW, thanks for the time you will dedicate to my request bye and congratulations again
Hello. I'm only trying to run a virtual sound check with studio one and the x32 rack. The recording part went okay. Except when I'm trying to make it play through each channel, that is not working right. I only get the Main LR playing through two channels. I have already assigned each input on my daw to the corresponding channel on the x32. Can anyone tell me if they know where I'm going wrong, please?
Hi Marcus, I have the x32 and using Studio One. I have a problem with getting the input signal to the tracks to record. I get the sound signal on the x32 and the x32 edit but nothing to the Studio One I’m using a Mac M1.
Thank you so much for your help, I'm having another problem, hoping for your help. I'm trying to control my mix with the dca group, when I press the mute button for the channel I have selected the mute button flashes correctly, now when I raise the #1 fader in the dca group to control fader #1 on the left side of the x32, vol on the dca fader does not work, no volume, hoping for your help?
Great video very helpful, I’d like to chat with you more I’m not getting the exact results. I’m waiting with my ex 32 to hook up to Studio one professional.
Not through the Hui mode... But when you bring everything back to the board track for track, you can bring the effects sound quality and also incorporate the effects of the Behringer. True Hybrid mixing at it's finest!🔥👈🏾
Hey sir, running into one last snag. Just got the board set up using all of your tips, but the only thing I can't get is playback from the board to the outputs. Is there some sort of routing thing I'm missing inside the x32? Right now outputs in studio one are pointed to out one and two. Thanks! Edit: managed to get playback working through the headphone output for some reason, just no love from the main outputs on the rear.
Select the group DCA1-8 button near the faders. Hold it down and faders 1 & 2 will have arrows. The Matrix 1-6 button will will bring up the transport options. Stop, Play, Return to zero, Reworn, & F.F.
Dumb questions: 1. When on the routing page is it absolutely necessary to use Local 1-32 or can it be set to AES50 A1-32? 2. Once you load Presonus do you have to create ALL 32 tracks are is there a way to get that to load automatically?
Thanks Bro,....I've been waiting for a few years now for someone to make an EXCLUSIVE Video for the (X-32 to Studio One Setup). This was a HUGE time saving help for me and my struggles to connect my favorite Mixer to my Favorite DAW. Now I can really start being creative with my Music. Do you have anymore X-32/Studio One ... Video's. I'm definitely going to subscribe to your Video Channel.
![ILLSLICK X YOUNGOHM - We're The same [Official Video]](http://i.ytimg.com/vi/yUJNkobYR0E/mqdefault.jpg)
![KRK - ชนิสรา Ft.WanMai , N/A [Official MV] Prod. By Sakarin](http://i.ytimg.com/vi/C-WMwwYobcU/mqdefault.jpg)
I have a problem. I use Studio one 6.6.2 Professional. Between x32 to pc connected. But i cant record sound from microphone .There iis not a signal.
Select the group DCA1-8 button near the faders. Hold it down and faders 1 & 2 will have arrows. The Matrix 1-6 button will will bring up the transport options.
Stop, Play, Return to zero, Reworn, & F.F
This really helped. Thanks. I was disappointed at first when I thought I could only control the first 8 channels of studio one, but your comment helped me out big time. Thanks.
@@dogefresh2 The best part is bringing a full session track for track back to the board from studio one. All of the effects come as well and then you can still add the power of the boards efx.
@@thadirtyabbott33 this I'd like to learn next.
@@dogefresh2 look for my name in the other famous place since it keeps being moved when I put it in... lemme know if that works
Just remove the DJ part and it should pop up
All audio from your daw will default to aux 1&2 on your console. In order to get it back track for track the way it went in if you truly want that hybrid mixing setup then... Go to your Input/Output section on the mixer screen for the session you have .Then create the amount of tracks you need. Go to back to the mix screen and go to the sends. Select the corresponding sub track for track... Sub 1, Track 1 so forth. And BOOM!!!
Good Luck!👈🏾💪🏾
This video has been a great help for me. I was considering purchasing an iostation 24c by presonus to utelize the faderport features as well as the audio interface, especially for writing automation. Now that I got my x32 producer to control the faders and transport of studio one, I don't need the iostation 24c anymore. Thanks for the video.
Dude, thank you. I was trying to help a buddy set one of these X32s up with Studio One about 6 months ago, and I just couldn't get playback running for love or money. Thank you so much!
No problem at all man!
How to overdub?
Thank you for your video! I need some more help though. Lol. I have an x32 digital rack so the settings under setup-remote are different. I can’t seem to find any x32 rack videos on set up for FL/Studio One.
at 38 seconds you have the card set to aux 1&2 set to DAW? Where is it that you set it to DAW?
A video about virtual sound check please?
Please I need to understand how to do a multi track recording from X32 to Studio one
congratulations, I need help I have the producer but I can't set it let me explain... in the CARD / LOCAL / AES A / BUS / routing how should they be set? then the whole SETTING part / communication with Studio one 6 in practice I would like to use it in remote DAW, thanks for the time you will dedicate to my request bye and congratulations again
Hello. I'm only trying to run a virtual sound check with studio one and the x32 rack. The recording part went okay. Except when I'm trying to make it play through each channel, that is not working right. I only get the Main LR playing through two channels. I have already assigned each input on my daw to the corresponding channel on the x32. Can anyone tell me if they know where I'm going wrong, please?
Look up...👆🏾 I explain how.
Good luck!👍🏾
Hi Marcus, I have the x32 and using Studio One. I have a problem with getting the input signal to the tracks to record. I get the sound signal on the x32 and the x32 edit but nothing to the Studio One I’m using a Mac M1.
Thank you so much for your help, I'm having another problem, hoping for your help. I'm trying to control my mix with the dca group, when I press the mute button for the channel I have selected the mute button flashes correctly, now when I raise the #1 fader in the dca group to control fader #1 on the left side of the x32, vol on the dca fader does not work, no volume, hoping for your help?
Thanks I appreciate you getting right to the point !!!
Any way to use the controls like Eq, Compression etc. inside of studio one from the M32?
Not on the X32 which is a bummer.. Gotta get the Wing for those features..
Great video very helpful, I’d like to chat with you more I’m not getting the exact results. I’m waiting with my ex 32 to hook up to Studio one professional.
Thank you for sharing :)
And what about controling plugins ?
Does Mackie HUI enables user to take control over them?
You're very welcome! I'm not 100% sure to be completely honest.. If I find out anything I'll definitely spread the word!
Not through the Hui mode... But when you bring everything back to the board track for track, you can bring the effects sound quality and also incorporate the effects of the Behringer. True Hybrid mixing at it's finest!🔥👈🏾
Hey sir, running into one last snag. Just got the board set up using all of your tips, but the only thing I can't get is playback from the board to the outputs. Is there some sort of routing thing I'm missing inside the x32? Right now outputs in studio one are pointed to out one and two.
Thanks!
Edit: managed to get playback working through the headphone output for some reason, just no love from the main outputs on the rear.
Just what I needed many thanks
Thank you for the great tips, I followed your instructions and I can control 1-8, but how do I get to the next 8 tracks, 9-16, 16- 24, 25- 32?
Select the group DCA1-8 button near the faders. Hold it down and faders 1 & 2 will have arrows. The Matrix 1-6 button will will bring up the transport options.
Stop, Play, Return to zero, Reworn, & F.F.
Yo thanks Bro, I know you said on instagram that you was going to do it this week...I appreciate you
No problem at all!
Dumb questions:
1. When on the routing page is it absolutely necessary to use Local 1-32 or can it be set to AES50 A1-32?
2. Once you load Presonus do you have to create ALL 32 tracks are is there a way to get that to load automatically?
save it as a template
Could you technically toggle in and out of the DAW remote while in a live setting?
I don't see why not!
Yes... I do It all the time...
Thank you so much
No problem!
THANKSS!!!
No Problem!
This is good stuff
Right on man 🙏🏾
Awesome
Thanks man 🙏🏾
Thanks Bro,....I've been waiting for a few years now for someone to make an EXCLUSIVE Video for the (X-32 to Studio One Setup). This was a HUGE time saving help for me and my struggles to connect my favorite Mixer to my Favorite DAW. Now I can really start being creative with my Music.
Do you have anymore X-32/Studio One ... Video's. I'm definitely going to subscribe to your Video Channel.
Glad I could help! This is the only video so far with S1. I do have another video about pairing it with Logic. Thank you so much for supporting!
Yaahn! Whats up man! Its been a long time since 150 Mass Ave...Really happy this popped up. Thanks for the video it seriously helped me out!
What's up man!!!! Glad you enjoyed it!
How can i contact u