Hi, normally metal flaps will have wobble issues. This is because the flaps are accidentally bent a little when we bring the fan up to the ceiling. its just like a car alignment can be adjusted. But for the noisy sound normally is the canopy(the fan cover) try to avoid the cover hitting the motor when it rotates. and for the top part canopy try not to stick too close to the ceiling leave some 10mm gap. if the noisy sound comes from the motor you could spray some WD-40 lubricant at the center of the rod and the motor area would help. if after applying the lubricant, but the sounds are still there then probably is the bearing issue, you can consider replacing a new fan, not worth repairing. Hope my comments help
Hi James, there is 2 method to mount the fan hook on ceiling. You can either use anchoring bolts like our friend (CG Teh) suggestions. Or use a wood to install fan hook. For me I prefer wood and ceiling metals strip's.. Because I use to it.. Both anchoring or wood works.. important is the top side must mount on concrete ceiling or roof trusses to have an extra support. An of cause cut the ceiling board and some patchwork takes part in this work too. I use a 2inch*4inch , 3ft length wood strip. - fan hook with 2*4 type. -some ceiling strip's .. Wood place horizontally, Put the hook on the wood, use ceiling metal strips to overlap the hook and wood screw it to secure on the sides and top. And this will be your custom fan hook. Next steps is to find a place that desire. Cut a 2ft hole in order to allow your body to access to the top. Then mount the custom made hook on the ceiling. Don't forget to add few support strip's , punch some holes on the concrete or mount on the roof trusses with ceiling strip's for extra support. Hope u get the idea. I will find chances to film this in the future
Thanks @@Handyman2Uchannel.. I’ve understood the plan already thank you so much for the tips. Keep going on with your videos, it’s very helpful and informative. Not much people are willing to share freely like you. Hope you will find success in TH-cam..
How I would like this KDK model to be sold in the Dominican Republic since the ones sold are the B56X5, N56LG, N56YG and M56LG and the control too since those from the DR have the numbers on the control and not on the wheel of control
O saya bicara dalam mandrian/Bahasa china. Tapi video saya ada cc boleh tekan dan dapatkan subtitle. Nanti i akan buat video dalam bahasa malaysia . apa2 i akan update di sini.. Stay tune.. Thanks for support🙏
![【DIY】没有电源和风扇勾，要怎样安装风扇 [电工教学] How to install a fan at new area without fan hook and power point](http://i.ytimg.com/vi/Cu7kohGMWzI/mqdefault.jpg)
![【DIY】没有电源和风扇勾，要怎样安装风扇 [电工教学] How to install a fan at new area without fan hook and power point](/img/tr.png)
Thank you for the detailed instruction. I installed myself and it works perfectly. ☺️
Glad to hear that 😀
Thanks for sharing....I just install ceiling fan by myself .....you are the best
Good for u bro 🙌🏻👍👍
想问发展商给的灯电线能用来装风扇吗？❤
可以啊，加个勾就可以挂风扇了
我的也是这一款，底部圆的那边有声音，可以喷WD-40吗？还是要拆开来看看。还有我上面没有安全线，这样是不是很危险？
还好，其实我家里的也是没有安全线，但是我少开。。可以的话就换一把。。
可以喷WD-40，会有帮助
您好，请问regulator的电线有分火线零线吗？
你好， regulator 其实两条都是火线。
原本在switch通往风扇的电线我们把它从switch拆出来,
放进regulator, 这regulator 还有一个链接电线的出口我们拿一条短的电线，一边接regulator 另一边进刚才在switch拆出来的链接口。
这样就可以用过regulator 来调风扇转动的速度。
@@Handyman2Uchannel 感恩您的回覆，支持像您的優質內容創作者！
你好，请问regulator那边的2条线，怎样接都可以的吗？因为我买了一架吊扇可是regulator那边的线1个写5a，一个写250v
你好，是的 怎样链接也可以的
一条从switch进regulator
一条是出给风扇
谢谢你。我成功了✌️
🤩👏👏
hi, is it KDK fans more likely to wobble? or because the installation not good enough causing it to very shaky and noisy ya?
Hi, normally metal flaps will have wobble issues. This is because the flaps are accidentally bent a little when we bring the fan up to the ceiling. its just like a car alignment can be adjusted.
But for the noisy sound normally is the canopy(the fan cover) try to avoid the cover hitting the motor when it rotates. and for the top part canopy try not to stick too close to the ceiling leave some 10mm gap.
if the noisy sound comes from the motor you could spray some WD-40 lubricant at the center of the rod and the motor area would help.
if after applying the lubricant, but the sounds are still there then probably is the bearing issue, you can consider replacing a new fan, not worth repairing.
Hope my comments help
请问我的天花板有三条黑，三条青和一条红，要怎样连接的？全部连接了风扇不会动，谢谢
这个原有的point 之前是在用着的吗？
先检查下红色开switch的话，testpen 测到有电吗。。
天花板三条黑要棒在一起， 然后和风扇的N 连接。
那三条青线也是棒在一起和风扇的青接起来。
如果红色有电源。那就要检查黑线了
你有downlight 吗？ 用它来接去红跟黑，看看这point有没有问题。
三条黑的要接好， 不然没有N 电路不完整，风扇启动不了。
红色的有电，我连接后，开switch青线也有电，是不是黑线有可能是地线来的？
@@Handyman2Uchannel新家的point来的
每个point有多少条一样颜色的都要连接起来吗？谢谢
Regulator 的兩條線不需要分對嗎？一條接去紅線，另外一條鎖去開關鍵。 這樣理解對嗎？
是的
hi....红线，意思就是电笔有灯那条吗？
Yes 😂
@@Handyman2Uchannel 谢谢你啊~那天你教我安那个water heater...我安到了。。。。现在，想试下风扇。。。😉😉😉
热水器安装得到，风扇你一定能😉
Hi, how do u secure your hook on plaster ceiling/gypsum board ceiling? If directly screw hook on plaster ceiling will the whole fan drop?
U can’t install the hook on plaster ceiling, must install at brick with the anchoring bolts, gypsum board can’t sustain the weight
Hi James, there is 2 method to mount the fan hook on ceiling.
You can either use anchoring bolts like our friend (CG Teh) suggestions. Or use a wood to install fan hook.
For me I prefer wood and ceiling metals strip's.. Because I use to it..
Both anchoring or wood works.. important is the top side must mount on concrete ceiling or roof trusses to have an extra support.
An of cause cut the ceiling board and some patchwork takes part in this work too.
I use a 2inch*4inch , 3ft length wood strip.
- fan hook with 2*4 type.
-some ceiling strip's ..
Wood place horizontally, Put the hook on the wood, use ceiling metal strips to overlap the hook and wood screw it to secure on the sides and top. And this will be your custom fan hook.
Next steps is to find a place that desire. Cut a 2ft hole in order to allow your body to access to the top.
Then mount the custom made hook on the ceiling. Don't forget to add few support strip's , punch some holes on the concrete or mount on the roof trusses with ceiling strip's for extra support.
Hope u get the idea.
I will find chances to film this in the future
Thanks @@Handyman2Uchannel.. I’ve understood the plan already thank you so much for the tips. Keep going on with your videos, it’s very helpful and informative. Not much people are willing to share freely like you. Hope you will find success in TH-cam..
师傅,可以给我你的工具list 吗？cordless drill model, drill bit size 还要其他重要的工具谢谢 ！
风扇太地，中间那个铁可以换的吗？
可以啊，五金店有卖， 可是那个safety switch 要记得绑着不然风扇不会转
请问ceiling 到地面9f，安装风扇会危险吗
九尺还好，你可以换短的rod . 五金店有卖8寸，10寸的。。 买了就跟原装的替换。
@@Handyman2Uchannel OK 谢谢
How I would like this KDK model to be sold in the Dominican Republic since the ones sold are the B56X5, N56LG, N56YG and M56LG and the control too since those from the DR have the numbers on the control and not on the wheel of control
Ty for sharing 😂
Thanks for watching 😉
Appreciate a lot . Your views means a lot to me 😃
@@Handyman2Uchannelmy dad also like you 😂 I also want it to learn 😊
@@Handyman2Uchannel你可以教我怎样安装冷气吗?😮
@Butter35664 Ur dad also 像我 ，还是喜欢我做的东西？😂
@@Handyman2Uchannel我爸爸也是跟你一样😂
你好 請問如果風扇用久了然後轉不快了 換motor的話要怎麼換啊 能夠出一個教程嗎？
哦那个是Capacitor ，
好吧我安排
谢谢你的教导
请教下，用两年了，start和低档时很响，开3号就没什么杂音，是什么原因啊？
你好，你可以尝试喷点wd-40 润滑油。 风扇有两个canopy盖，拉开下面的 然后在rod 的中间喷点下去。 这样会减低摩擦。
希望对你有帮助
你好，想请教你。风扇以开电。就会跳闸。是什么问题。
你好， 这个风扇的墙壁开关钮是有和其他灯的一起吗？
如果有就是说这风扇的（L) 链接有问题。因为其他的灯都可以正常操作。
你需要开风扇的盖来查看是否电线链接正确。 如果电线不小心相碰也会有这跳闸问题。
如果你看到电线链接是正确的， 那就把风扇自己的电线松开拆出来， 你准备一个LED downlight 链接到吊顶的那条电线来测试是否可以操作。
如果不能就是这条电路出问题。
如果能，就是风扇问题
我想请问我要把我的风扇换新的 我可以只是换风扇吗 regulator需要旧的拆下来安装新的吗
旧的regulator如果没坏可以用回。
@@Handyman2Uchannel 所以只是换买回来的风扇把了对吗 风扇和旧的牌子不一样 regulator也可以用回吗？
牌子不一样也可以用
我还有相关的问题 请问你可以给我你的联络号码 方便询问你吗
wa.link/c2nmdk
请问那个rod太长，可以改短吗？
如果你是用这款风扇的话可以， 五金店有卖。 最短的有8吋，长的有4尺都有。 如果要改再短点你就需要道具来“转洞”。 可是那个风扇盖可能就要牺牲一个，因为不够位放了
师傅 请问风扇吱吱声 会是什么问题？开小风或大风或者关掉用手转也会有吱吱声 这个声音我再听多几天就有幻听了😂
看声音是来自上面挂钩还是马达部位。 可以喷点WD-40 油在马达哪里。 如果是挂钩那边，上面的壳就别锁太高，留一个手指位
马达那边转动发出的声音 已经喷了油还是一样吱吱声 而且风扇的力度明显慢了很多 不过我的吊扇牌子是National已经用20年了 应该是够钟了吧？😥 。请问师傅有什么牌子的风扇经济实惠又大风的 求介绍🤓
20年， 可以换了。 耐用的话就是kdk 的regulator fan.
虽然现在的remote fan 价钱便宜，可是说起耐用还是kdk regulator 款。 K15v0 价钱大约 160-170(少于两百)
@@Handyman2Uchannel 师傅 K15v0 的 regulator款有没有5个叶的？叶越多比较大风吧？
@@VICTOR-nz2ur 这款三片叶的。 蛮大风下的啊。未必要拿五片叶的。
Tq for sharing
有4条线从天花板下来，两条青，两条黄，请问应该怎样接线？之前的吊扇两条青和一条黄绑在一起，一条黄则独自锁在接板上，所以我不知怎么接线。please help
找了天花板真的没有黑色的线？
那，你试下把一个黄接风扇L
另一个黄接风扇N看看
你家里之前的电工不够电线拿了别的颜色来弄。。 晕😂
@@Handyman2Uchannel 我把 L接黄线，N 接(黄+青+青), 那么G 该接什么？我是不是应该把绑在一起 黄青青拆开来？谢谢。那条独自的黄线是live, 刚刚检查了。
那个没有live 的黄不要链接青，不然也会跳电， 那个青也有可能是黑线。
所以两条青把它包好。 首先要确认看两条ceiling 来的黄，链接风扇一个L，一个N. 如果风扇会启动就恭喜你。 剩下那两条青就可以链接风扇earth. (不链接也可以，但把它包好)
如果没live的黄链接了N,风扇不会启动，那其中一条青就是黑线来的
@@Handyman2Uchannel 成功安装了，非常感谢你的教导
If you can do a video on installing KY-15B KDK then it will be good
Hello my bro, ky15b is old, and is not easy to find
Hi Joshua, this fan is similar to the model u mention. that model not sure still have a not..
旧的叶片生锈了，要换新的叶片上去。需要整个风扇都拆下来吗？
整架拆下来比较容易动手。不用那么长时间在楼梯上活动
@@Handyman2Uchannel 亲戚装修旧的吊扇不要了。我打算拿来更换自己已经生锈的叶片。不同型号的叶片可以代替更换吗？
一样brand 吗？ 应该可以但螺丝要用会你那架的。
请问 如果有底线 要接哪里
青色吗，ceiling出来的还是风扇？
风扇青色链接在rod 上面
请问转switch 4号去5号或转去其它号时风扇上面那支也会跟着转一些，造成有声音，请问是什么问题，怎样解决?买的风扇和你教的是一样的。谢谢
那个问题很正常罢了，那是因为你的风扇有力，所以一开电，那个风扇的力冲一下，所以会摇一下
錯誤方式 吊頭先才鎖葉片
请问你住在哪里？
KL 区 jalan klang lama
风扇会摇是什么问题
多数是因为叶子不平衡
我刚好有一个风扇是这样，我拍个影片看帮到你没有
U korea or ml
Malaysia
@@Handyman2Uchannel malaysia. Tapi cakap korea. Mana satu ni
O saya bicara dalam mandrian/Bahasa china. Tapi video saya ada cc boleh tekan dan dapatkan subtitle.
Nanti i akan buat video dalam bahasa malaysia . apa2 i akan update di sini.. Stay tune.. Thanks for support🙏
太实用了，谢谢