Projection of Lines_Level 2 Problem 1
ฝัง
- เผยแพร่เมื่อ 23 ต.ค. 2016
- Download the Manas Patnaik app now: cwcll.on-app.in/app/home?orgC... A straight line 55 mm long makes an angle of 30 deg to the HP and 45 deg to the VP. The end A is 12 mm in front of the VP and 15 mm above HP. Draw its projections.
My Affiliate Links:
My Samson Go Mic: amzn.to/2xgE0qR
My Wacom Writing Tab: amzn.to/2xh8FEv
Books I refer: amzn.to/2xe550a
amzn.to/2xgbJ3E
amzn.to/2jJOMmf - วิทยาศาสตร์และเทคโนโลยี
ur videos are awesome...it really made me understand better....u literally proved to be my god at this exam point of time...thaanku so much..
Apurva...
Thanks for your appreciation and support
All the best.....
And do encourage and recommend this channel to your friends...
kathal padak
Manas Patnaik 6*=
Sir could you please put the solutions in nd bhutt 10th excercise
Best video ever.....need such teachers in every college in India!
Hlo sir i scored 32 marks out of 50 ...i cleared my engineering drawing exam only because of u so thank u so much sir 👍👍👍👍
I contact you
Hey..can I contact you how you do that,because day after tomorrow will be my viva
@@imamkhan6762 don't worry...watch TH-cam videos according to your syllabus and clear your concepts
@@tenacious2745 i am from iiit bhagalpur,and a computer science engineer, from 1 St year ,there Is no theory in Ed only lab exam and viva and also I didn't study it before ,during lab i only copy that ,but now it create fear in my mind
@@imamkhan6762 don't worry viva will be asked about basic definitions
Sir it's too clear and tq for using simple English
Engineering Drawing | Engineering Graphics |: th-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
Thank you so much sir ...Your videos have equally helped me in clearing my critical graphics subject .
So blessed
You are doing a great job sir !
Respect
Thank you sir.. Really appreciate what u are doing for us.
+Bhaskar Boora
Thanks for appreciating bhaskar.....
Do watch all the conte t thats available on this channel....
ANd do encourage your friends and classmates to subscribe to this channel so that all can learn drawing in the best possible way......
+Bhaskar Boora
Thanks afor appreciating bhaskar...
Do watch all the content thats on my channel....
And also encourage your friends and classmates to subscribe to this channel.....
It is really very helpful, because exactly this question was done in my class, but I didn't understand that, so thank you so much
Very very thankful for your great explanation sir,I am big fan of your explanation sir...
Sir today i wrote my EG exam well. it was just impossible without u thank u
Im finally confident how to make this
Thankyou so much ✨
+Shivani Pandey
All the best then Shivani
Excellent teaching I can't seen this type of teaching in my life I subscribed your channel after watching this one video keep rocking😍😍
Thank u sir,u have helped me a lot ,now I can play with this projection of lines topic extremely
Maanas ji, you are a very good and gifted teacher. Thanks for sharing your knowledge.
Sir ur explanation is awesome, thnk u somuch sir u helped me alot
Thank you sir. 🙏🙏
You really explained the concept well with the software.
Engineering Drawing | Engineering Graphics |: th-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
U r a man who is the best tutor in the you tube videos.u r the best . U really understand the mindset of students sir... Ur really amazing. Thanks a lot for your help and support
Thanks for appreciating my work.
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English
1. Orthographic Projection: th-cam.com/video/WG6H2pISUzQ/w-d-xo.html
2. Projection of Point: th-cam.com/video/fK4h5gM73w8/w-d-xo.html
3. Projection of Line:
OLD:
th-cam.com/play/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV.html
NEW:
th-cam.com/video/pzE0D-Ijxd4/w-d-xo.html
4. Projection of Plane: th-cam.com/play/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg.html
5. Projection of Solid: th-cam.com/play/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm.html
6. Section of Solid: th-cam.com/play/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v.html
7. Development of Surface: th-cam.com/play/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v.html
8. Auxiliary Plane: th-cam.com/play/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB.html
9. Interpenetration of Solids: th-cam.com/play/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM.html
10. Isometric Drawings: th-cam.com/play/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83.html
11. Conic Sections: th-cam.com/play/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ.html
12. Cycloidal Curves: th-cam.com/play/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z.html
13. Involute:
th-cam.com/play/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa.html
14. Plain Scale and Diagonal Scale: th-cam.com/play/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9.html
15. Complete Engineering Drawing in one single Playlist: th-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi
1. Orthographic Projection in Hindi: th-cam.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html
2. Projection of Point in Hindi: th-cam.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html
3. Projection of Line in Hindi: th-cam.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html
4. Projection of Plane in Hindi: th-cam.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html
5. Projection of Solid in Hindi: th-cam.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html
6. Scales Hindi-Urdu:
th-cam.com/play/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB.html
Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English
1. Forces:
th-cam.com/play/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0.html
2. Friction:
th-cam.com/play/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m.html
3. Shear Force and Bending Moment: th-cam.com/play/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7.html
4. Trusses:
th-cam.com/play/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7.html
5. Centroid and Centre of Gravity: th-cam.com/play/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p.html
6. Moment of Inertia:
th-cam.com/play/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy.html
7. Dynamics:
th-cam.com/play/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z.html
8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: th-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
Sir,your teaching is good and you are satisfing us with your video's using simple english and clear explation.
Really thankful for your vedios sir!! You made better understanding vedios 🙏🙏
Your videos are very easy to understand and really helpful, keep it up man.
Hi Ritik...
Keep learning and do let your friends know about this channel so that they can also benefit...
All the best
Yeah sure
You are doing a great job sir
Very very nice video....,.fully clearing all the concepts.....really helpful
I Legit learnt this sum during the exam and did it. Thankss!
sir ur explanation is awesome. can u give some example problems related to this topic
Great work! Really impressive
Thanks for being short and simple
Really appreciate what do for us thank-you so much sir .
Nicely explained with good animation
Sir your videos are simply great you have helped me understand the topic very well ..thanks a lot my entire class watches your videos for reference thanks a lot
Thanks a lot Vardan for appreciating the content...
Do check out Engineering Mechanics also on my channel page...
All the best...Have a great time and CHEERS...
You are the best in case of explaining this subject
Please make videos on grade and bearing of a line
Thank you for such a great video 💓...keep making more
All the best.
1. Engineering Drawing (English) :
th-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
2. Engineering Drawing (Hindi) :
th-cam.com/play/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU.html
3. Engineering Mechanics:
th-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
4. Mechanics of Solids:
th-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html
5. Theory of Machines:
th-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html
6. Machine Drawing:
th-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html
7. Engineering Services Examination_Engineering Drawing_Prelims:
th-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11:
th-cam.com/play/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM.html
9. Manas Speaks Series:
th-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Physics Channel Link:
th-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
My AMAZON Store - For all you students.
www.amazon.in/shop/manaspatnaik
Manas patnaik... You are awesome, thankyou
Thanks for appreciating Abhishek...........
All the best....
And do create an awareness amongst your friends and classmates about this channel. So that they can subscribe and learn Engineering drawing in the best possible way...
Your way to explain logically concept is very nice
Thank you are doing great job
Thanks for your comments Rupal....
All the best....
And do let your friends know about this channel on drawing and mechanics so that they can also benefit.....
Tq soo much..... Sir Even our faculty not teach like u sir always keep rocking sir
But sir what is the value of alpha, bite,Elevation length, plan length, A-B .please mention it.because it is necessary to write in the exam.
Super explanation Anna
I'm following ur videos during my exams TQ
Hi Aravind.......
Thanks for appreciating my work...
Keep watching and do let your friends know about this channel so that they can also benefit....
Your videos r really awesome..super explanation
Thanku for ur help Sir....your videos will make E.D. my favorite 😊💐
bro tq for ur efforts to provide video if I clear my exam it's jst becoz of u once again tq so much 😊
Thanks katukam for your kind words...
I am sure your hard work will take u a long way...
All the best man......
Excellent sir....super.......
Thank you so much.... It's really very helpful....
Thank u for all the videos
Thank u sir now I'm very easily drawing projection of lines ..
No words to describe! Thank you so much sir...☺
Sir thank u so much I watched every videos it's nice your teaching style is good but my request is please do the videos of projection of lines midpoint related problems
Three points A, B and C are 7.5 m above the ground level, on the ground level and 9 m below the ground level respectively. They are connected by roads with each other and are seen at angles of depression of 10°, 15° and 30° respectively from a point O on a hill 30 m above the ground level. A is due north-east, B is due north and C is due south-east of 0. Find the lengths of the connecting roads.
Thanks a ton for the help
really helpful videos sir. They truly are very useful. Please keep on helping us like this
+kanishk thakur
Glad to hear that kanishk.....
+kanishk thakur thanks brother
Thank you so much sir!!!
Thank u so much sir i was totally confused abt this bfre watching the video... Thanku so much
Hi Kailas....
Thanks for appreciating...
And do spread a word about this channel with your friends, classmates and juniors so that all can benefit.
Easily explained. Thank you sir.
Subjectwise Playlist:
1. Engineering Drawing/Graphics (English): th-cam.com/video/WG6H2pISUzQ/w-d-xo.html
2. Engineering Drawing/Graphics (Hindi): th-cam.com/video/SB83cUaAiCM/w-d-xo.html
3. Engineering Mechanics / Applied Mechanics: th-cam.com/video/Z4WN2Z9okfs/w-d-xo.html
4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: th-cam.com/video/Co4YlavCpeQ/w-d-xo.html
5. Theory of Machines: th-cam.com/video/Co4YlavCpeQ/w-d-xo.html
6. Machine Drawing: th-cam.com/video/iFCnFUR9Gdc/w-d-xo.html
7. Engineering Drawing for Engineering Services Prelims: th-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11: th-cam.com/video/0fejUC79LZY/w-d-xo.html
9. Manas Speaks Series: th-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Channel 2 Link:
th-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
Perfect explanation.....👍👍👍
Sir ,thank u so much, It helps more to me
Doing great job sir
Thank you so much sir.......I got O grade (Outstanding) in my exams
here one question
the front view of a line AB , 90mm long , measures 65mm. front view is inclined to XY line with 45 degree. point A is 20mm below HP and on VP and point B is in third quadrant draw it projection and show its inclination with HP and VP
Very well explanation sir
Thanks sir . It's very help for me
Really ur vedios are too good and usfull as well as. Thanks
All the best.......
Subjectwise Playlist:
1. Engineering Drawing/Graphics (English): th-cam.com/video/WG6H2pISUzQ/w-d-xo.html
2. Engineering Drawing/Graphics (Hindi): th-cam.com/video/SB83cUaAiCM/w-d-xo.html
3. Engineering Mechanics / Applied Mechanics: th-cam.com/video/Z4WN2Z9okfs/w-d-xo.html
4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: th-cam.com/video/Co4YlavCpeQ/w-d-xo.html
5. Theory of Machines: th-cam.com/video/Co4YlavCpeQ/w-d-xo.html
6. Machine Drawing: th-cam.com/video/iFCnFUR9Gdc/w-d-xo.html
7. Engineering Drawing for Engineering Services Prelims: th-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11: th-cam.com/video/0fejUC79LZY/w-d-xo.html
9. Manas Speaks Series: th-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Channel 2 Link:
th-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
Thank you so much sir for your valuable information sir...
Arre sir maza aa gaya ek hii baar mein samaaj aa gaya pura
Thank you sir
a. Draw the three principal views of a line 90 mm long when it is placed parallel to both HP & VP. One of the ends of the line is 60 mm above HP, 30 mm in front of VP and 40mm in front of the right PP.
Superb .made to understand easily
Thank you
Hi Siddalinga Prabhu......
Keep learning and do let your friends know about this channel so that they can also benefit...
All the best
Thankyou so much sir. Ur way of making us understand the topics is really appreciatable sir. Itz only bcz of u that i performed well in grahics👍
amazing video sirji. Thank you sooooo much : )
Thankyou so much sir you're really great sir
Thank you sir i understand it very well 💜
thanks for the video sir
Thanks a lot for the info sir.
Thanks Noel for the appreciation
All the best...
And do let your friends know about this channel (regarding drawing and mechanics) so that you all can benefit...
awesome sir
thank u because of u i passed in my exam
A line AB, 60 mm long, has its end A 25 mm from VP and 35 mm from HP. Draw its projections in 2nd and 4th quadrants if the line is parallel to both the principal planes. Sir please answer of questions
Good Way Of Explaination
Thanks sir helped a lot
Hi Vijay..
Thanks for appreciating the content...
All the best and do let your friends know about this channel so that they can also benefit....
Can u please make a video on how to draw side view for a line inclined to both HP and VP
Thank you so much sir 😍
Thanks for help
Thank you soo much it is soo clear
Thank you brother
Thank you sir 🙏🙏🙏
Thank you very much sir 👍👍👍👍👍
Awesome teaching sir
Thanks bro u helped me a lot in exams
+Vatsal Kachhiya
Hi Vatsal.....
I am sure these videos are helping u learn....
Keep watching and do let your friends know about this channel so that they can also benefit....
All the best.....
Sir how did you draw the arc from point b2' i.e. which command did use?
i m so thankful to you sir 🙏🙏 ....
+Arushi Tiwari
Hi Arushi......
Thanks for appreciating the content....
And do let your friends know about this channel so that they can also benefit....
All the best and Cheers.....
Nice bro... Thank you 😘😘😘😘
Thanks a lot sir love you
thanks.. nice explanation sir.
So good sir this video is so good
Thank you sir it's very useful
Sir ur video is good
Thank you
very nice your teaching
very nice explanation sir
Thank you so much
Thank you so much....aapne meri marks bhadvayi
You Help me a lot
Thank you so much sr
sir what we will do if arc length a'b2' is not sufficeint to cut the above line anywhere in any other similar problem...please tell
sir what if ab1 was shorter than the distance between the loci of a and b2. Then the arc wouldn't intersect to give point b right? this will happen if in the same case the line made a wider angle with HP.
kindly clarify
Tq sir it was really helpful...
Very clean