The etapAPP can be removed the same way as any other app, just delete the app. If you need any further assistance, please contact our Help Center at helpcenter.etap.com
Thank you for you interest in ETAP Software. To show the dimensions on the UGS drawing, simply click Editor mode and the dimensions will show. Please contact our technical support by accessing out 24/7 Help Center at helpcenter.etap.com
@@rhymanoserous This can have many different reasons why dimensions don't show. Please contact our technical support at helpcenter.etap.com for further assistance.
how to lay underground cable directly .Also, I need to check about the current carrying capacity depend on the depth of the cable laying position.Also expecting to add different layer above the cabling runway..is this possible in this software
Thank you for your interest in ETAP Solutions. Regarding your question, in addition to the underground “Duct Bank Raceway” system, which is explained in this video, ETAP has the option to define a “Direct Buried Raceway” system, which models the set of cables that are buried directly under the ground (within a Raceway with backfill). In ETAP Underground Raceway presentation, user can define the raceway size and the coordinates at which the cables are located, and the thermal properties of raceway backfill. User can easily adjust the depth of the cable laying position either visually or from the editor. ETAP allows arrangement of multiple raceways within one presentation. As long as the raceways and cables are laid out properly, user can conduct Ampacity calculations.” If you need any further assistance, please contact our 24/7 Help Center at helpcenter.etap.com
Thank you for your interest in ETAP Solutions. To get feedback on your question, please contact ETAP technical support via our 24/7 Help Center at helpcenter.etap.com
How do I remove Etap from my Android phone?
The etapAPP can be removed the same way as any other app, just delete the app. If you need any further assistance, please contact our Help Center at helpcenter.etap.com
How do you get the dimensions to show up?
Thank you for you interest in ETAP Software. To show the dimensions on the UGS drawing, simply click Editor mode and the dimensions will show. Please contact our technical support by accessing out 24/7 Help Center at helpcenter.etap.com
@@ETAPsoftware I’m using 20.0.4. I don’t see dimensions.
@@rhymanoserous This can have many different reasons why dimensions don't show. Please contact our technical support at helpcenter.etap.com for further assistance.
how to lay underground cable directly .Also, I need to check about the current carrying capacity depend on the depth of the cable laying position.Also expecting to add different layer above the cabling runway..is this possible in this software
Thank you for your interest in ETAP Solutions. Regarding your question, in addition to the underground “Duct Bank Raceway” system, which is explained in this video, ETAP has the option to define a “Direct Buried Raceway” system, which models the set of cables that are buried directly under the ground (within a Raceway with backfill). In ETAP Underground Raceway presentation, user can define the raceway size and the coordinates at which the cables are located, and the thermal properties of raceway backfill. User can easily adjust the depth of the cable laying position either visually or from the editor. ETAP allows arrangement of multiple raceways within one presentation. As long as the raceways and cables are laid out properly, user can conduct Ampacity calculations.”
If you need any further assistance, please contact our 24/7 Help Center at helpcenter.etap.com
How I can change the OD, ID and Thickness of the conduits, if they are different with what is in ETAP??
Thank you for your interest in ETAP Solutions. To get feedback on your question, please contact ETAP technical support via our 24/7 Help Center at helpcenter.etap.com
thanks
Thank yo for your interest in ETAP Solutions.