Hello Jordane. Yes the pump flows more at idle but then there already is load on the rod bearings, when turning over without fuel / plugs out there isn't. Also its nice to see if there are no leaks because at 40psi its a mess, at 10psi its not
The higher your compression/boost, the more compressed air between the center electrode and tip. Why you need a tighter gap because it seems like the gap is actually larger, to the spark plug.
bmw really dropped the ball limiting the RPM on the DME for the s58. they destroked it, gave it the bearing clearance for 9k rpm from factory and then limited the rpms. the s58 piston speed, bore/stroke is literally screaming "rev me to 9 grand". Im about to 3d scan and mold up full carbon doors for my g42. if someone were able to bring me all 4 doors of a g80 to make hard molds and then scan both the mold and the door i can make full carbon g80 doors that will still hold windows and electronics. lets do some work together.
I don thave an s58 yet to rev to the moon but its coming. I just finished a bc 3.4l n54 with mid sleeves, n53 head, k20 honda studs sank super deep. copper gasket with a pure stage 3 8hp75 swapped. 2670 lbs , 1300+whp with real trans brake and 5k rpm stall. i rev it to 8500 as well but it will see 9k on the scramble. im about to go 7.6x 's once chris hurries tf up with my billet converter lol. 1.16 60' and 1400whp on tap with spray. its only a matter of time before i make a clean pass and take the fastest bmw quarter mile from the shop ct in an n54. ill see you at the bottom of the 8s, top 7s once you get this beast goin. ill say a prayer to the bmw gods for you when i beg them to let my car run good tonight LOL
This Chanel is so underrated why don’t this get more likes and views as it’s such good content
🔥🔥 You really wilded out. Wanted to see you do it full weight. You went straight to final boss lmao
Hello Jordane. Yes the pump flows more at idle but then there already is load on the rod bearings, when turning over without fuel / plugs out there isn't. Also its nice to see if there are no leaks because at 40psi its a mess, at 10psi its not
Legend. Love the front mount intake on my 240. Thank you for the awesome product
Appreciate the support. 🙏
Rk front mounts are trash- heat soak all day.
The higher your compression/boost, the more compressed air between the center electrode and tip. Why you need a tighter gap because it seems like the gap is actually larger, to the spark plug.
Can't wait too see this G80!
You learn so much information in so little time watching this.
jordan videos are like a whirlwind and im here for it... always haha
RAWDIATORS 😂 love the vids dawg
Lfg Jordan!!! get it done
This thing will be fast as fuk can’t wait to see it go down the strip😊
bmw really dropped the ball limiting the RPM on the DME for the s58. they destroked it, gave it the bearing clearance for 9k rpm from factory and then limited the rpms. the s58 piston speed, bore/stroke is literally screaming "rev me to 9 grand". Im about to 3d scan and mold up full carbon doors for my g42. if someone were able to bring me all 4 doors of a g80 to make hard molds and then scan both the mold and the door i can make full carbon g80 doors that will still hold windows and electronics. lets do some work together.
So far we got it up to 8500+ rpms.
I don thave an s58 yet to rev to the moon but its coming. I just finished a bc 3.4l n54 with mid sleeves, n53 head, k20 honda studs sank super deep. copper gasket with a pure stage 3 8hp75 swapped. 2670 lbs , 1300+whp with real trans brake and 5k rpm stall. i rev it to 8500 as well but it will see 9k on the scramble. im about to go 7.6x 's once chris hurries tf up with my billet converter lol. 1.16 60' and 1400whp on tap with spray. its only a matter of time before i make a clean pass and take the fastest bmw quarter mile from the shop ct in an n54. ill see you at the bottom of the 8s, top 7s once you get this beast goin. ill say a prayer to the bmw gods for you when i beg them to let my car run good tonight LOL
i still dont get why he prefers mhd over bootmod?
Yeah he says he will say why and then doesn’t say why.
Stop disappearing we need more videos on this lololo. Or videos in general.
Let’s fuckin goooo 🔥🔥🔥
Jordan, what do you like about MHD compared to Bootmod3? Serious question. Just trying to educate myself before I get an S58. 😄
Just seems like alot of extra..when the s58 firmula is out there 🤷. Either way keep it up
ur such a goat. please tune my supra.
❤❤❤❤
AWD? Or RWD?
Have some fiber glass doors made
Looks like he blew it up..
First !!! lol Jordan what up
No 1600HP No care
God damn Jordan- cut back on the coke a little bro
Nelson