I really like the idea of putting the sticky image on the block and then position the stamp on. I’m sure if I had known that I wouldn’t have made a mess on some of my stamps.
I have a similar problem with the solid image stamps mostly photopolymer but have had it with the cling mount on occasion. My flowers would not be solid like yours. What’s the secret to get them like that?
Hi Anne, Thanks for stopping by!! Oh, stay warm!! We got snow and ice here yesterday and I loved being snowed in. I had an excuse to wear warm slippers and craft all day!! Stay safe. Hugs, Brandy
How do you get it exactly where you want it to go every time? I have to use a stamp positioner. My concern now is that I will always need the stamp positioner since I am not trying to wean(for lack of a better word) 12:02 myself off of it. Any advice would be greatly appreciated.
Thank you for showing how to successfully put the rubber stamps together. I often have trouble putting the sticky side on the back of the rubber stamp. Wow - you have made life easier.
Will you be covering inking properly and cleanly - that is, with red rubber in particular, even though I think I’m only tap tap tapping, I still get ink on the edges leaving a halo.
Wanted to thank you for sharing your tip on how to put your cling mount on rubber stamps with using a stamp block. All this time I have been doing it the other way. Your way is less room for error. Yeah!
I have the simply shammy. Is that what it's called? The purple stamp cleaner? How am I supposed to store it? It dried out and became all warped and itnwas really hard to re wet.
saw your video about a week ago and was amazed at how easy it was to put stickers on rewd rubber stamps. Never seen it done that way before. I tried it and wow I didn't have much over hang to try to trim off. Thank you for your tips
Thanks for stopping by Mary!! I hope you find it helpful when mounting your stamps. Stay in touch and let me know if you have further questions. I'm always happy to help. Hugs, Brandy'
Another simply explained and informative video for beginners and established stampers, thank you Brandy. A small suggestion, encourage stampers to get under the sticker when lifting stamp off the block. I've ruined a couple of stamps by pulling the stamp off and damaging the foam backing.....just a thought. Regards from UK 🇬🇧
Aww... Thank you Febe!! I love sharing my passion for paper crafting and stamping with others. Thank you for the kind note and for stopping by. Hugs, Brandy
I am enjoying your beginner series even though I am a demonstrator with you. I seem to learn something new with each of your videos (beginner or other vids). I sooooo love the Stampin'Up ergonomic blocks!! Thank you so much for sharing!
Hello Brandy, Great tip to use the acrylic block to place the design on to the stamp, easier than peeling off the label. Love the refresher videos. Many thanks.
Thanks for showing how you attach the cling stamp to it's image; it is a great way to get it aligned up correctly. No more out of alignment for me. Brandy you've made me happy!
This is a helpful and much needed series. Although I have been stamping for awhile, I still learn many new tricks and the refresher of things I may have forgotten is welcoming. Thank you.
Love you bunches!! Thank you for the kind note. I'm so glad you are finding little tips and tricks that are helpful. That makes me so happy!! HUGS, Brandy
Hello Brandy, I'm so glad that I found you again, I use to watch you years ago! I have a question regarding new stamps not getting good ink coverage. This usually happens with polymer stamps. What am I doing wrong or all polymer stamps not of the same quality? Do I pre-treat the stamps or clean them first? Help.
Brandy: Thank you for the trick of putting the stamp layers together. I have had terrible trouble .
Duh! It never occurred to me to turn the stamp to make a different kind of flower! Tfs!!!
I notice some stamps don’t stick to the acrylic block….not the red rubber but the other ones. Any hints on that?
thank your for all your great videos!
What a great video!! I’m so excited to try to mount my stamps as you demonstrated because I usually have trouble mounting mine!! Thank you Brandy!!
Thank you for the block tip for adding the rubber stamp sticker! Will use it for sure!
Thank you Brandy! The lesson in putting together the cling mounts was helpful. Much easier than when we had to cut the rubber!!
I really like the idea of putting the sticky image on the block and then position the stamp on. I’m sure if I had known that I wouldn’t have made a mess on some of my stamps.
Sometimes with photopolymer stamps, it doesn’t stamp all the way. It’s kind of uneven. It’s like the ink isn’t sticking to the stamp. Why is that?
I have a similar problem with the solid image stamps mostly photopolymer but have had it with the cling mount on occasion. My flowers would not be solid like yours. What’s the secret to get them like that?
Hi everyone from snowy ontario
Hi Anne, Thanks for stopping by!! Oh, stay warm!! We got snow and ice here yesterday and I loved being snowed in. I had an excuse to wear warm slippers and craft all day!! Stay safe. Hugs, Brandy
How do you make the rubber stamps sticky again? I have acquired several old rubber stamps and they will not stick to the glass blocks
As I said before, I learn something new every time!! EXAMPLE: How you put a cling mount sticker on a rubber stamp!!!
Hi from Phoenix
Thank you so much dear Brandy! You are always a celebration of paper crafting creativity and knowledge! Thank you for being Y💗U!!
Love the idea to put sticker on block then line up stamp on sticker.
Hi Bonnie, Thanks for stopping by and for your note. Oh, yes... it's a game changer. Give it a try.... so much easier!! Hugs, Brandy
How do you get it exactly where you want it to go every time? I have to use a stamp positioner. My concern now is that I will always need the stamp positioner since I am not trying to wean(for lack of a better word) 12:02 myself off of it. Any advice would be greatly appreciated.
I love all your tips. Thank you for sharing.
Hi Ana, Thank you for stopping by. I'm so glad they were helpful. Happy Stamping!
Thank you for showing how to successfully put the rubber stamps together. I often have trouble putting the sticky side on the back of the rubber stamp. Wow - you have made life easier.
Hi Brandy
I really enjoyed this video especially the part about the stickers so, helpful.
Thanks for the tip! I always get the stickers on my sentiment stamps crooked, so frustrating! I'll be trying this for sure.
Will you be covering inking properly and cleanly - that is, with red rubber in particular, even though I think I’m only tap tap tapping, I still get ink on the edges leaving a halo.
Wanted to thank you for sharing your tip on how to put your cling mount on rubber stamps with using a stamp block. All this time I have been doing it the other way. Your way is less room for error. Yeah!
Hi, Brandy! I've not tried mounting the label on the cling stamp this way! Okay got to try it out!
Brandy, you are so helpful, I love all your videos. Do you always need a piercing mat under the clear stamps?
I used your sticker on the block to mount on stamp. Boy!! What a difference.
I just found your channel. Love all the information you share with us. Thank you
Like your method of mounting the rubber stamp. I have struggled with this in the past. Learning many tips from this series
I have the simply shammy. Is that what it's called? The purple stamp cleaner? How am I supposed to store it? It dried out and became all warped and itnwas really hard to re wet.
saw your video about a week ago and was amazed at how easy it was to put stickers on rewd rubber stamps. Never seen it done that way before. I tried it and wow I didn't have much over hang to try to trim off. Thank you for your tips
Thank you, always wanted to know about how to get photos on rubber stamps. Very helpful.
Always good to share beginner tips. Thank you!
Thanks for the tip for attaching the sticker to the rubber - my least favorite thing to do.
Im not buy the clear pol stamps . I will not buy any thing but good rubber stamps.
Love the way you mount the sticker on the red rubber. I just received my 1st red rubber set since watching this video. What a game changer! Thanks
Very interesting and informative…Thanks…
Thank you so much for the hint on putting the stickers on the stamps. I am going to give your way a try.
I thinks someone that is definitely a beginner will get a lot of good, helpful information. I like to watch because you can always get good tips.
Thank you for the information on how to mount the stamps to the image.
So excited about seeing this.
Thanks for stopping by Mary!! I hope you find it helpful when mounting your stamps. Stay in touch and let me know if you have further questions. I'm always happy to help. Hugs, Brandy'
thanks for sharing your tips!
Hi M Aurora, It's my pleasure!! Thanks for stopping by and for your kind note. I'm glad you find them helpful. Blessings, Brandy
Great tip for stamp mounting! Thank you
Thanks Brandy, love your videos xxx
Great info even for those of us who have stamping for a little while.
Love these videos. Now i know how to clean my stamps.
Great tips, thank you!
Thank You Mary!!
what happens when the sticky wears out and don''t work
Thank you for mounting tip on the red rubber!
Thank you Brandy was helpful
Great content, thank you
Thank You!
Good insight on stamps.
Thank You!!
The way you put the stamp on to its picture is an way.
Another simply explained and informative video for beginners and established stampers, thank you Brandy. A small suggestion, encourage stampers to get under the sticker when lifting stamp off the block. I've ruined a couple of stamps by pulling the stamp off and damaging the foam backing.....just a thought. Regards from UK 🇬🇧
Thanks VeeCee for watching. Good tip!
good tips Brandy! Thanks
Thank You for sharing the tips
Thank you for sharing Brandy.
Hi Brandy. It is good seeing you.
Great tip to mount.
Thank you!!
I love this series . I can’t thank you enough for presenting it! I have stamped for years unaware of some of this information.
You are so welcome! Glad you are enjoying them!
Love all the tips given here!
I have been stamping for over twenty-three years, but learn something new all of the time. This is a great video. Thanks.
Ah, so Glad you enjoyed it Shirley!
Thank you. I have learned so much in your first two classes. Looking forward to seeing all.
Oh Betty, that makes me so happy!! Thank you for the kind note and for stopping by. See you next week!!
Nice video👍👍
Thank you I learned a lot from your last live with the triple stamping loved those cards and this one too
Awesome! Thank you for watching
Thank you for sharing Brandy. Keeping it simple is a good thing.👍
Thank You Rita!!
Hi brandy
Hi Amy, Thanks for stopping by. I hope you find tonights video helpful!! Big Hugs, Brandy
Hi Brandy
Hi Danica, Thanks for joining me. I hope you're doing well and staying safe!!
Thanks Brandy always willing to learn & hear tips of how to get better use of ur crafting materials & tools. TYFS!! Be blessed!!
Brandy, I learn something new every time I join you.
You are an awesome teacher ❤
Aww... Thank you Febe!! I love sharing my passion for paper crafting and stamping with others. Thank you for the kind note and for stopping by. Hugs, Brandy
I am enjoying your beginner series even though I am a demonstrator with you. I seem to learn something new with each of your videos (beginner or other vids). I sooooo love the Stampin'Up ergonomic blocks!! Thank you so much for sharing!
Hello Brandy, Great tip to use the acrylic block to place the design on to the stamp, easier than peeling off the label. Love the refresher videos. Many thanks.
Thanks for showing how you attach the cling stamp to it's image; it is a great way to get it aligned up correctly. No more out of alignment for me. Brandy you've made me happy!
This is a helpful and much needed series. Although I have been stamping for awhile, I still learn many new tricks and the refresher of things I may have forgotten is welcoming. Thank you.
Thank you Brandy for the tip on putting the label on the cling stamps. I have struggled many years and many mislabeling. It was an eye opener. 💕😊
Thank you Brandy for doing the beginners series. I love how you mount your stamps so helpful!!!
The way you mount your red rubber stamps looks so much easier thank you for showing this way.
This is so great, I’ve been stamping for years and I have learned something from both videos!
Always nice to go back to the basics. Thank you for all the tips and tricks!
Brandy that was an awesome video, I just love every tip and hint you share with us. I learn something new everytime..thank you for all you do.
Love you bunches!! Thank you for the kind note. I'm so glad you are finding little tips and tricks that are helpful. That makes me so happy!! HUGS, Brandy
>
TY, TY, TY for this series.
Glad you like Judy, thanks for watching!
Hello Brandy, I'm so glad that I found you again, I use to watch you years ago! I have a question regarding new stamps not getting good ink coverage. This usually happens with polymer stamps. What am I doing wrong or all polymer stamps not of the same quality? Do I pre-treat the stamps or clean them first? Help.
I always wipe my new stamps with an alcohol free baby wipe 1st
@@HandcraftedintheFoothills Thank you Miss Deeva, I'll give it a try!