IM38 Capacitor Start Induction Motor
ฝัง
- เผยแพร่เมื่อ 25 ต.ค. 2019
- Lectures on Electrical Machines By Dr. Tirupathiraju Kanumuri, Assistant Professor, NIT Delhi
Link for Material
drive.google.com/drive/folder...
Link for Lectures on Synchronous Machines:
• Synchronous Machines
Link for Lectures on Special Electrical Machines:
• Special Electrical Mac...
Link for Lectures on Transformers: • Transformers
Lectures on DC Machines: • DC Machines
Lectures on Induction Motors:
• Induction Motors
Lectures on Basic Electrical engineering:
• Basic Electrical Engin...
Lectures on EMFT:
• Electro Magnetic Field...
Lectures on Induction Motors By Dr. Tirupathiraju Kanumuri, Assistant Professor, NIT Delhi
Link for Lectures on Synchronous Machines:
• Synchronous Machines
Link for Lectures on Transformers: • Transformers
Lectures on DC Machines: • DC Machines
Lectures on Induction Motors:
• Induction Motors
Lectures on Basic Electrical engineering:
• Basic Electrical Engin...
Excellent lecture Sir. Thanks 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
Superb sir ❤❤
Please post more videos sir.
Hello Sir, If I have to design an electronic (microcontroller based) switch in place of the centrifugal switch, on what basis should I decide when to disconnect the starting capacitor ? You mentioned that the capacitor has to be disconnected when motor reaches 80 percent RPM. Is there any way I can somehow electronically figure this out without having to actually measure the RPMs. Is it safe to wait for say half a second after switching on the motor and then disconnect the capacitor ?
Sir please tell me,the centrifugal switch open when rotor reach 75% of full load speed,thenafter rotor rotate or not?if rotate why
Sir if capacitor is not disconnected in running condition then what will be effect of I in machine?
A capacitor start induction motor is switched on to supply with its
capacitor replaced by an inductor of equivalent reactance. The
motor will
(a) not start at all.
(b) start and run slowly.
C) start and run at rated speed.
d) start with humming noise. Sir can u tell me what will happen?
In auxiliary winding resultant reactance is Xc - Xa or Xc - Xm
Sir
what will be happen if we use very high value of capacitance
in comparison to rated value
@@lecturesinelectricaleng thanks sir
I understood
How to select capacitor voltage rating?
Sir, I am deaf, i didn't understand this video, plz add caption or subtitle.
sir,how energy transfer takes place between Land C elements when switch open?
How energy transfer takes place when switch is off in inductor and capacitor sir ,you told that statement ?
sir ,at timeline of 12.24-12.30
Ok sir thank you
hello sir i wamt talk to personly
Sir is there any special reason you used Xl-Xc/R instead of Xc-Xl/R when finding the auxiliary winding angle? Because you get a different answer if you use the latter i mentioned? Is it derived from the phasor diagram ? I was thinking capacitance will always overshadow inductance after capacitor is introduced hence it should be Xc-Xl? Kindly explain. Thanks
@@lecturesinelectricaleng Alright thanks