How to fit a paper backing to a picture frame - Professional framing tips.

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 ก.ย. 2024
  • How to affix a paper backing to a picture frame. A short tutorial by a professional picture framer on how to put a paper back on a picture frame. By using brown kraft paper it is possible to create a dust protective barrier on the rear of any picture frame.
    Make sure you watch this video right through to the end as the best tip on how to make the job look highly professional comes at the end of the video.
    Links - As an Amazon Associate I may earn from qualifying purchases by using the links below.
    Brown Kraft Paper
    amzn.to/42rMlVR
    Double sided tape - There are many on the market. The tape below is one I use for many applications within my picture framing and would be more than suitable for this task.
    amzn.to/46HyUUA

ความคิดเห็น • 78

  • @joyurquhart
    @joyurquhart วันที่ผ่านมา

    Thank you so much for this especially the water tip looks so clean and professional

  • @sstwest
    @sstwest 5 หลายเดือนก่อน +2

    Thank you so much for showing us how to do this. I'm in Texas USA and I was quoted a price of over $200 just to replace a glass on a picture that my aunt had painted. I went to the glass company and took my frame and they cut me a piece of non glare glass I came home and replaced the picture but I did not know how to put the backing on. I appreciate your time in showing us how to do this God bless

  • @veronicajackson4868
    @veronicajackson4868 4 หลายเดือนก่อน +1

    Your instructions are wonderfully clear and easy to follow. After thrifting numerous art prints, original paintings, and two large rolls of craft paper, I'm now ready to add paper backings to my pieces, and feel confident in my ability to do so because of your video. Thank you!

  • @seriouslyreal2693
    @seriouslyreal2693 2 ปีที่แล้ว +2

    Love the finishing tip with the water. Ty for sharing

  • @GaryGrube1
    @GaryGrube1 3 ปีที่แล้ว +13

    This is a very nice video! As I removed the original paper to clean mold from the inside of the glass, I am not so keen on using water to cause the paper to shrink. I have 91% isopropyl alcohol in a small spray bottle for this purpose. Just a light spray, as shown in the video, to lightly dampen the paper and it evaporates cleanly, quickly an completely, not reintroducing water moisture to the environment inside the frame.

    • @cubehire3653
      @cubehire3653 ปีที่แล้ว +1

      I am researching how to apply dust covers to my frames. I do my best to keep water away from my prints and paintings. I was thinking I maybe be able to use isopropyl for this purpose

    • @GaryGrube1
      @GaryGrube1 ปีที่แล้ว +1

      @@cubehire3653 I hope it works out for you!
      Just remember to keep the alcohol away from the print it self as it may make the ink or paint fade or bleed. If you just use it on the plain paper backing, it should be fine.

  • @margretmcdermott2005
    @margretmcdermott2005 3 ปีที่แล้ว +5

    Thanks! I used your method and the result was highly professional looking. I was able to deliver the painting to my collector confident that the frame job looked as good as a professional framer's work. I added a tag I printed with my logo and painting description on colored cardstock and it looked deluxe!

  • @misspetite7632
    @misspetite7632 2 ปีที่แล้ว +2

    Thank you for making this video. Nice and professionally presented with no nonsense.

  • @garciahe6930
    @garciahe6930 2 ปีที่แล้ว +1

    I was skeptical, but was very surprised how well it turned out in your video. I will definitely use this procedure onl my frames. Thanks!

  • @prairieplains
    @prairieplains 3 ปีที่แล้ว +2

    Very much appreciated. Have a few projects I can now complete

  • @parisasun2541
    @parisasun2541 2 ปีที่แล้ว +1

    Excellent. Grateful for this professional tutorial.

  • @mindfireart7843
    @mindfireart7843 หลายเดือนก่อน

    Thank you!

  • @larryfarr
    @larryfarr 10 หลายเดือนก่อน +1

    Thank you. Very well explained and demonstrated.. Much appreciated from Canada.

  • @samcooch3604
    @samcooch3604 3 ปีที่แล้ว +2

    I actually did this using gorilla tape and I can't believe how nicely it turned out. I was skeptical but wow did it turn out great! Thank you!

  • @rudychavira5558
    @rudychavira5558 9 หลายเดือนก่อน +1

    Well done, my next project

  • @marionbritton2807
    @marionbritton2807 ปีที่แล้ว +1

    Very helpful! Thank you!

  • @johnhooper1492
    @johnhooper1492 3 ปีที่แล้ว +1

    Thanks for making the video it makes it look doable!

  • @georgemacdonald5282
    @georgemacdonald5282 ปีที่แล้ว +1

    Great video made it look nice and easy and made a lovely job, thank you.

  • @mariegamber
    @mariegamber 3 ปีที่แล้ว +1

    Thank you for the great tutorial.

  • @traceymoore9355
    @traceymoore9355 5 หลายเดือนก่อน +1

    Amazing❤

  • @rudychavira5558
    @rudychavira5558 2 ปีที่แล้ว +1

    Very nice, thanks

  • @bernadettepesce773
    @bernadettepesce773 ปีที่แล้ว +4

    Thank you so much! I have a large mirror that lost its backing a long time ago. I understand that the backing adds a safety factor in case of the mirror glass breaks. I never would have guessed about the last step with a spray of water and heat to make the paper taut. Do you have any recommendations on the double stick tape? You mentioned there are tapes with varying qualities. Lastly, your voice reminds me of Ringo Starr's voice which I think is nice. :)

  • @swainchampagne
    @swainchampagne 4 ปีที่แล้ว +2

    Thank you so very much. This is great! Really appreciate the info and your time for sharing this.

  • @lauraromains4037
    @lauraromains4037 4 ปีที่แล้ว +1

    excellent. Thank you so much!

  • @tjscrafts7953
    @tjscrafts7953 2 ปีที่แล้ว +3

    Hi what brand of tape did you use? Thanks for the video. Thanks Terri

  • @lindahill5194
    @lindahill5194 4 ปีที่แล้ว

    Very helpful! Thanks!

  • @fromthepeanutgallery1084
    @fromthepeanutgallery1084 5 ปีที่แล้ว

    Very nice job mate! Now I can do me own.

  • @sjsphotog
    @sjsphotog 4 ปีที่แล้ว +1

    great video tutorial. thank you very much. I need to find that special double sided tape that has the cover you can peel off to reveal the sticky surface instead of just the regular double sided tape that is always sticky on both sides and doesnt have the cover. I think this only works on a sanded / bare wood frame as when I tried it on a painted back frame the tape pull right off and became a mess and I gave up.

    • @FrameAndDisplay
      @FrameAndDisplay  4 ปีที่แล้ว +1

      Thanks for your feedback. Yes, there is a huge range of double sided tapes on the market, generally speaking the cheaper ones are more trouble than they are worth.

  • @BlytheWorld1972
    @BlytheWorld1972 3 ปีที่แล้ว

    Amazing thanks .

  • @nenitacapistrano3273
    @nenitacapistrano3273 4 ปีที่แล้ว

    Great idea and very informative D.I.Y. thank you very much for your time to share this video.

  • @Thomashargrove602
    @Thomashargrove602 5 ปีที่แล้ว

    Thanks for making this video!

  • @happinessbysharingexperien4357
    @happinessbysharingexperien4357 5 ปีที่แล้ว

    Thank you so much. It really helped me

  • @KidPersepolis
    @KidPersepolis 3 ปีที่แล้ว +7

    Except, NEVER SPRAY WATER ON YOUR FRAME/ARTWORK. The last thing you want to do, especially if you are framing a photograph, is introduce any sort of moisture to the mix.

  • @alekseikostritca74
    @alekseikostritca74 4 ปีที่แล้ว

    Wow!! Thank you so much!!!!))

  • @lizhamilton5934
    @lizhamilton5934 5 ปีที่แล้ว

    Thank you so much for that!

  • @nisigate
    @nisigate 4 ปีที่แล้ว

    Thank you so much

  • @kbeej8522
    @kbeej8522 8 หลายเดือนก่อน

    Hi.... This's Awesome!
    Pls, what's radiation used in drying the paper ?

    • @FrameAndDisplay
      @FrameAndDisplay  8 หลายเดือนก่อน

      Just leave it in a warm dry area, a place where paper would dry out naturally.

  • @loricleary4473
    @loricleary4473 5 ปีที่แล้ว

    Thank you!!

  • @bgm1911
    @bgm1911 5 ปีที่แล้ว +1

    will try this way because adding the paper to the frame (as opposed to the vid showing the frame placed on the paper) almost always results in creases at the edge.

    • @sjsphotog
      @sjsphotog 4 ปีที่แล้ว +1

      yeah I did it the wrong / opposite way as well and it became a mess and didnt work. this makes so much more sense to push the frame INTO the paper instead of fighting to try and alighn the paper to the frame.

  • @cherylprice963
    @cherylprice963 ปีที่แล้ว +1

    What about hardware to hang the artwork

  • @Killashandra111
    @Killashandra111 4 ปีที่แล้ว +1

    Can you provide info on the paper you use, a link would be appreciated. Also, if you want to use glue instead of tape, what glue? A link would be helpful there too. Thanks.

    • @FrameAndDisplay
      @FrameAndDisplay  4 ปีที่แล้ว

      Thanks for your comments. The paper is just normal Kraft Paper. We used it in the old days to wrap up parcels. If you google "Kraft paper" you should be able to find a supplier local to you. It's also available in small rolls in stationery shops. There are different weights on the market, the heavier the paper, the better, for this job. As for glue, I try to avoid the stuff as there are so many good tapes on the market. Copydex used to be good for this type of job, and many others.

  • @CrazyOldFolk
    @CrazyOldFolk 3 ปีที่แล้ว +3

    What did you use to adhere the paper to the frame

  • @bonchauvin5744
    @bonchauvin5744 2 ปีที่แล้ว +1

    What kind of tape did you use?

  • @indicababy5513
    @indicababy5513 2 ปีที่แล้ว

    I just bought an art print secondhand that was done like this, but the frame cracked and the screw that held up the wire to hang the print broke out. I'm not sure if I should/can fix it or if I should just go get a new frame :/

  • @tjscrafts7953
    @tjscrafts7953 2 ปีที่แล้ว

    Can this process be done on the back of a paint canvas? Thanks Terri

  • @wayneguy6043
    @wayneguy6043 3 ปีที่แล้ว +1

    What brand tape?

  • @growamind
    @growamind ปีที่แล้ว

    Do we need to worry about breathability? Does brown kraft paper have breathability when using it as the dust cover on a canvas painting? How do we know if the paper we use on the back has breathability or is this even important, especially if using a floater frame?

    • @FrameAndDisplay
      @FrameAndDisplay  ปีที่แล้ว

      The method shown here is used to seal the back of a frame to restrict the airflow access to the frame. With airflow comes dust, dampness, mites and bugs etc. The process shown would not be considered a hermetic seal, but If you require breathability then you would need to look at a vented back. (TBH a couple of pin holes in the paper top and bottom would achieve the same)

  • @M3GANdoll
    @M3GANdoll 5 ปีที่แล้ว

    Great tutorial!...How do you add hanger for wall???

    • @cutazabutton
      @cutazabutton 5 ปีที่แล้ว +5

      Buy the hardware, screw it into the back 1/3 down from the top edge on both sides. Add wire. Viola!

  • @georgemacdonald5282
    @georgemacdonald5282 ปีที่แล้ว

    If the paper shrinks and becomes tight, is there a chance that it will distort the frame.

    • @FrameAndDisplay
      @FrameAndDisplay  ปีที่แล้ว

      If the frame is very thin and flimsy then you should really be looking at a solid board backing.

    • @georgemacdonald5282
      @georgemacdonald5282 ปีที่แล้ว

      @@FrameAndDisplay thankyou for your advice and for replying.

  • @stephstremp
    @stephstremp ปีที่แล้ว

    Hello! Where can I buy the self-adhesive Kraft paper? I found some at the Dollar Store, but I don't think it has adhesive for protecting the back of my frames

    • @FrameAndDisplay
      @FrameAndDisplay  ปีที่แล้ว +1

      This video uses standard Kraft paper, no self-adhesive paper is used.

    • @stephstremp
      @stephstremp ปีที่แล้ว

      @@FrameAndDisplay Gotcha! How does it stick to the frame? I think I missed something. Thanks in advance!

    • @curiouscharacter1
      @curiouscharacter1 ปีที่แล้ว +1

      @@stephstremp You use a very light coating of glue applied with an appropriately sized brush or you can use double-sided tape as they did in the video.

  • @barbaraepye3895
    @barbaraepye3895 3 ปีที่แล้ว

    does it tear

  • @k2irving
    @k2irving 3 ปีที่แล้ว

    I need to back a 4'x5' piece. I can't find paper large enough to do a solid piece. Any suggestions on how to do this if I need to use more than one piece of paper?

    • @FrameAndDisplay
      @FrameAndDisplay  3 ปีที่แล้ว

      Sorry, never tried joining pieces, so can't advise. According to google It is possible to get Brown Kraft Paper on rolls up to 4 or 5 feet wide. A full roll is quite expensive at those sizes though.

    • @Crossword131
      @Crossword131 3 ปีที่แล้ว +1

      Butcher paper. The expensive kind. Or, if you have access to a box that a standard table comes in, also 4'x5' you can poach the card board or even remove the top paper (by separating the cardboard from the wavy bit in the middle. Measure twice, homie. Good luck!!!

    • @Crossword131
      @Crossword131 3 ปีที่แล้ว +2

      Or, go to Goodwill and steal the paper from the back of the biggest, ugliest frame with decent backing. Probably cheaper than the xxl butcher/kraft paper. Cheers!

  • @kerrybell4587
    @kerrybell4587 4 ปีที่แล้ว

    I tried lightly misting Kraft paper on the back of a frame and it left a wrinkled mess! I'm wondering why?! Thanks!

    • @FrameAndDisplay
      @FrameAndDisplay  4 ปีที่แล้ว

      Most likely it's the quality of the Kraft paper. There are different weights available. The heavier the better for this exercise.

    • @nickenniss
      @nickenniss 4 ปีที่แล้ว

      @@FrameAndDisplay What weight do you recommend using? Is 80 gsm enough? Looks like yours is pretty much like what I've got at home, just wanted to make sure :)
      This video is the best I found on this topic, thank you so much!

    • @FrameAndDisplay
      @FrameAndDisplay  4 ปีที่แล้ว

      ​@@nickenniss Hi Luiza. I am sure 80gsm will work. The heavier the paper the better and more professional the finished job looks. Paper qualities and properties vary considerably and it is just a matter of having a go and seeing how it works with any particular paper. You also need to factor in how robust you need the back to be, thinner papers will be more prone to punctures from protruding wall hooks and the like.

  • @wansufian8765
    @wansufian8765 4 ปีที่แล้ว

    Hye..what the name of the paper? Thank you

  • @BG-my7eg
    @BG-my7eg 5 ปีที่แล้ว

    archival?

    • @FrameAndDisplay
      @FrameAndDisplay  5 ปีที่แล้ว

      Brown Kraft paper is not an archival material.

  • @victoriabellanova2280
    @victoriabellanova2280 5 ปีที่แล้ว

    Very helpful! Thanks!!