Cutting Designs Bigger than Your Laser!
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2024
- This method works for engraving too!
If you buy using my links below, I may get small share of the sale.
Longer B1 40 Watt Laser Engraver/Cutter:
amzn.to/3IbfEUW
My Longer B1 Laser Review: • Video
PPE: OD 6+ Laser Safety Glasses: amzn.to/43nTiYt
Twotrees Laser Engraver Enclosure: amzn.to/3P9BeMG
Disclaimer: The content presented in this video is for entertainment purposes only. The information provided is not intended to substitute or replace professional advice, and viewers should not rely solely on the information presented in this video. Viewers should always do their own research and consult with professionals in the appropriate fields before making any decisions based on the information presented. The creator of this video does not guarantee the accuracy, completeness, or usefulness of any information presented in this video.
#diy #Making #Longer #LongerB1 #LaserEngraver #LaserEngraving #LaserBusiness
![일상 속 기분 좋음 [Proto disco meme]](http://i.ytimg.com/vi/DwmEIaZ7XGQ/mqdefault.jpg)
If you have other topics you'd like me to cover in future videos leave me a comment!
Ola boa noite?? O meu recorte fica cerca de 1mm fora se "se nao escalar" e quando coloco para "escalar" sai cerca de 0,5 mm. Sabe o que poderia ser??
That proces is awesome. Thanks for sharing
You're welcome! Hope you found it useful!
Thanks. This took me a couple tries to really understand the logistics of the process, but now I'm confident I can pull this off in the future with no problems. Good explanation.
Glad it helped!
Thank you for this video! I've been trying to help my dad (who is a beginner with LightBurn) figure out how to do exactly this! He had been struggling for a while and after I watched this video, I was able to set up a project with target points and it came out perfectly!
Glad I could help!
Although it is a little difficult, you explained the subject very well. Thanks.
Thank you!
Thanks Curtis. As always, helpful and informative.
Glad it was helpful!
Very useful video!! Really appreciate the level of detail you show! Thank you!
Glad it was helpful!
Thanks for this very helpful video, I did not know this function.
Happy to help!
Congratulations for the video, it was very useful, thank you!
Glad it was helpful!
Hi Curtis as usual your video was informative I can use this to print parts on three and 4 feet balsa wood for my model aircraft.
Steven.
Awesome! Glad it was helpful!
Nice job...I wouldn't want to do this all the time but it's great to see that it can be done. I'm a newbie with a new machine and just learning lightburn too!.
Thank you!
I got my email already. This is so cool and great.
Awesome! Hope you find it useful!
Wow I really enjoyed this video short and sweet and right the point with all the necessary details. I learned from this video about cut shapes and separating a part this a new tool for me on LB thank you!!
Glad it was helpful!
Gracias por compartir tus conocimientos, esto hace que todos avancemos.
Tengo una pregunta...
Para que sirve el invento que has fabricado?
It's a pendulum for a wooden clock I have plans for.
thank you curtis
Hope you found it useful!
You say you are using the sandy ply, have you had good luck with cutting as well as engraving? I'm trying to find wood that is close to me for projects that I can use for both cutting out and engraving. Thanks.
Yes I have had success with cutting and engraving both on the sande ply. For engravings I'm talking surface level marking basically, I haven't tried doing any deep engraves on the plywood.
@@LetsMakeAThing thanks
Could you have done this with a previewcamera attached? Or would it not be accurat enough?
Honestly, I'm not sure. I don't have a preview camera so I haven't had a chance to test it.
What about x and y by moving the machine And leaving piece stationary
Good question. You could move the machine and then run the print and cut routine again. You should get the same results.
I am also interested in this, how to prepare large drawing to be cut on large plywood sheet. It needs to be cut on x and y axis. I only managed to find instruction on one axis. Actualy I would like to laser cut kayak parts from sheet of plywood with laser cutter that has working area of 600x600mm. If you do this kind of video, I am sure it will be the first on YT. 🙂
You mentioned that you intentionally placed the crosshairs close to the cut line. Wouldn't it improve accuracy to space the crosshairs as far apart as possible?
In all my testing I found I didn't need a ton of distance between the crosshairs to get an accurate alignment. Your mileage may vary though.
2:49 >> on, Doesn't do what you show here on version 1.6.03 with the pencil tool. Just no guide line
Hello new follower excellent content,I have two questions,can i do this process of the split in multiple cuts for a larger piece?(for example 3,4,5 split parts) and my other question is if the laser set up options have to be user origin ? In order to apply the print and cut or I can do it in absolute coordinates too? Im rookie with the laser machine 😅, thanks!
Yes, you can do this with multiple splits. Lightburn will automatically set the origin type when you select print and cut.
@@LetsMakeAThing thanks 🙏 for your help and knowledge.
Is there a reason for when you click jog to second position its so far off (for me at least) i would have thought that it would be bang on in at least one axis.
Try engraving a square and measure the dimensions of the engrave versus the dimensions in Lightburn. If the dimensions are significantly different in one or both axis you may have a belt tension issue with the laser.
don't wanna be picky but instead of saving the files as separate names, you could just click on the bottom bit and click on a layer at the bottom to swap it to a new one then untick output . then switch layers or configure that layer to what you need , to do the other part .
Just feels cleaner to have parts that go together in the same file. especially if they are this simple
It may be fixed now, but in the past people had issues trying to do multiple part cuts when everything was in one file. Which is why I put mine in multiple files.
03:10 I was today years old!