I always love your work Mike, I had hoped during the "lockdowns" we would see something from you. I hope you and your family have a blessed holiday season.
Is anyone out there taking up the torch for Mike now? Where do we go to see even a shadow of Mike’s work? MIKE YOU rest in peace brother. An amazing man ❤️
Has he passed on? Maybe somebody can get some of the schematics from somebody he knows. I hope not it sounds like he was good and healthy and doing fabulous work
Mike Kantz the inventor and designer past away on April 13th. We have a go fund me under the name Sarah Kantz to help keep things going. Thank you to everyone who supported Quanta Magnetics
Wow so sad to hear this. Damn... another great inventor gone, before he finally revealed the secrets... I am very sad to hear this. Hopefully you could put all his left things someday online for the world not to forget your husband / or father Father... Many thanks in advance. My deepest condulence. Regards, Stefan.
Hello Sherri my name is Zion, I am curious is there anyone I can contact to keep some of his research, I have very similar research tech Im in final stages of developing and I wanted to know if there is any equipment Q Mag Generators or the Graphtie Plate Capacitors I could help either move forward and or buy some samples to test along side my developments. If so please let me know here.. My condolences to you all and Mike and all of his family. Mike did some amazing work! Thanks Zion
Always interesting designs here. You're selling your things and it's great for you and innovation. But I dream that one day you create your own HUGE electric powerplant. I just imagine if you add a solar pannel farm with this ( but way bigger for a whole city... the future is here)
Solar is archaic at this point and creates more toxins in the environment for a small reduction in CO2 emissions... We could do so much more if we create thorium-based nuclear powerplants and they are the cheapest option and cleanest option in the long-run, even able to take the nuclear waste produced by the older nuclear power plants.
@@silviafox78 and How much this powerplant cost removing grass? takes carbon? how much electronics does it take? :) no radioactive incidents? You're dreaming! Go take a walk around Chernobyl powerplant for 15 minutes ;)
@@realcourte - good question. Usually Thorium-based Nuclear power plants have a higher startup cost compared to coal, oil, gas plants. However it is much much cheaper to maintain them over the long run as they do not have to pay high prices for oil, coal, or gas and can recycle old spent nuclear fuel rods of our older Uranium-based fuel rods which is basically free-to-a-good-home unless those older nuclear plants prefer to bury their fuel rods for over 10,000 years, instead! But even then older depleted uranium and thorium is much cheaper to rely on especially considering how expensive it is to sequester the Carbon emissions produced by the system. Overall the cost comes out to about the same or less within a couple decades and leads to a cleaner and cheaper source of energy for future generations. I assure you I am not dreaming and 15 minutes in chernobyl has been found to be safe at the moment for researchers and such.
@@silviafox78 I know that atomic energy is safe... until something happen. Then go take a ride around the japanese nuclear reactor that exploded ( 2 outa 5 if I remember well). France got some too. But where will be the next incident? That, you don,t even try to understand this dilema cause miles away from the problem. You're thinking is "It's safe" BUT you are miles away from nuclear catastrophes. Solar panel don't explode and let some grass grow around them. While your "safe thing" just chew the environment beneath and around it ( not even ONE tree). I think Mike got something and with just a small xtra amount ( no nuclear powerplant please) of energy could go beyound his small scale prototypes. A small look at something that went wrong here ( and ugly as hell): www.thebalance.com/thmb/sPM7O1-RFVjewOD2QpNBMWuiZlc=/3000x2011/filters:fill(auto,1)/3-mile-island-nuclear-plant-56a9a7ef5f9b58b7d0fdb625.jpg
keep up the great work your allsome if i could work for any body it would be you you are definitely ahead of your times my friend future Generations will greatly appreciate the work you have done here
I tried to visit the website but the domain is down. I was really interested in buying some of the graphene super caps those things are out of this world. I hope it will be available for sale again soon!
R.I.P Michael Allen Kantz Now we wont ever know, how advanced this wouldve became!!! Condolences to His family. I read the obituary of Mr. Mike A Kantz
2:10. Could you please explain what you mean with bridge ractifier and rotary transformer? Sketch would be nice. Did you use a regular 4 kW AC motor or did you have to change anything?
bridge rectifier converts ac to dc ,when you rotate motor with power on 2 windings the 3rd winding acts like a transformer and makes power out put like a generater ,,you can use this method to make 3 phase power with single phase supply .
@@bohydrus7108 are you sure about that? You cannot spin an AC cage motor with DC current. You can with one AC phase but if you put a bridge rectifier in front, this won't work. It might if you use PWM. So, I am not sure if this is correct. The BR might be used to rectify the 3rd phase that is used as a secondary to feed a battery or so.
I need something to power my solar batteries at night. I live in the Pacific Northwest, we don’t have sun for 12 to 14 hours in the winter. Do you have something that could help me with that? I need something that I can hook up to an MPPT to charge my batteries at night. I don’t know if anybody makes a self running generator to do this.
Thanks for your great ideas and products. Thought you had medical problems. No updates for a long time did you go work for tesla. He could use your battery. Hope all is good .hope you'll find time to answer private questions.Glad to see your ok. Nt
I can do MCU compute, I understand you do require to work towards an ECU which will even more so improve in many areas of operating the machine at peek, automated :D
I wonder where all the energy comes from? T Henry Moray writes in his book, THE SEA OF ENERGY IN WHICH THE EARTH FLOATS, "IN THE FINAL ANALYSIS RADIANT ENERGY IS A MEANS OF USING THE ENERGY RELEASED BY THE FISSIONABLE REACTIONS TAKING PLACE IN THE STELLAR CRUCIBLES OF THE UNIVERSE." Capitalization is by the author for emphasis.
Hey Mike! Cool solution! I have a question regarding the GS module - What would be the easiest way to install that on bicycle? What kind of motor could you suggest with that? If want more volt engine should I add some coil to convert or need batteries or smthg? How would charging it back by the pedaling would work?
Great work Mike and great video, very interesting. Any chance we'll see a home generator for sale at some point. I can see where this is going. The question is, could you cycle this configuration indefinitely by alternating between the energy in the power grid or a powerful battery bank for a few moments and then return to the 16v module for an hour as shown in the video? If so, how much power is there left to utilize on electrical loads? I'm intrigued by this possibility. Could this be done?
@@PMMG4HYBRID Unfortunately you took your secrets with you into your grave, when you passed away... Too bad.. we are missing your ingenius videos.....RIP Mike Kantz.
*Wow Mike ! What an achievement in electrical efficiency. Regarding the Graphene 16 Volt module; I am assuming there is some way to recharge the energy stored in it ? Can you elaborate on how this works and how much you are selling these Graphene Moduals for, please ?*
Yes, you can channel the rectified DC output back to the source of input (Graphene Module) providing that it is voltage compliant and an isolated circuit such as the dual toroids are. www.shop.quantamagneticstore.com/16V-2000F-Graphene-Supercap-Module-GRPH-mod.htm
try looping back the access energy(if any) and connect the load.. if "lucky" you should get the Kapanadze generator/transformer effect.. 40Watts in >> 5000 Watts out :))
This will sound like I did not see your old videos but here it goes: Are you able to tell me the loss on the inverter? Is there a way of reducing that loss?
So basicly the Red unit /device on the left is the speed controller to tune it down to the speed that efficiency but still produce the most power? Instead of 4 magnets, if you make 8 or 12 magnets would it produce more power? because more magnetic field? or no need? thanks
Am I missing something? Why not route the 40vdc back into the super caps? Or at least part. But this is sufficient tech as is to rectify our global fuel “crisis”.
All this appears to be awesome. BUT, the big question, in my opinion is, can this machine setup SELF RUN and still give out excess energy and if Yes, how much in watts? Because that is what matters, finally. Having Solar in the background will obviously cover up any shortages and come out as excess. Thank you.
Lol, no it cant. You're going to lose 10% in the inverter, 10% in the motor, and 10% in the generator assuming everything is 90% efficient , which it surely is not. Notice he didnt put any load on the motor here. Im sure that motor can run free at 30 watts or so without issue. 30 watts in will never equal more than 30 watts out. If the thing could self run he wouldnt need to sell you supercapacitors.
Yes this type of machine could self run. The Rotoverter is consuming a low amount of energy, the generator part is probably generating way more than the Rotoverter needs to run.
@PMMG4HYBRID Unfortunately you took your secrets with you into your grave, when you passed away... Too bad.. we are missing your ingenius videos.....RIP Mike Kantz.
Man i went to look at the store because i was planning to buy a device but sad to hear that. Is there anything anywhere i can purchase these or something similar? Sad to hear that.
This completes the task while idling at 28-30W @ 1770 rpm and has a 50 lb armature/flywheel. Also under a mechanical load, it will deliver up to 1.8hp on demand. No little motor can offer this.
You may want to try Reliable Electric. They are a lower end inverter but they can custom set input voltage to your specs. A 4 s NMC will be similar to your needs
Hi. I want to move me and myself from salt lake City Utah to Huntsville Alabama. Using an electric vehicle that I'm building. I want to use a generator like yours. Want to help?
Mike, what capacitance did you find most efficient for start and what is running phase of this motor? Thanks. BTW we got your idea that this is all for demonstration of how powerful 16v ultracapacitors bank that your are selling is. Its fantastic!
Is it safe to hook a bunch of these graphene super capacitors in parallel or even series? I'm wanting to use them for a massive instantaneous draw on a electric drag racing motor setup. (They only need a few seconds of massive output, I figure since they're discharge rate is better than lithium batteries for their weight, I'd have an advantage?)
Mike if your out here I don't know I was told you had a problem. If you or family answers this I would like to talk to someone. You have my e mail .hope someone gets back to me. Thanks Ntpr O
here's the problem with what you're doing. you're using a solar panel, but you're neglecting to show the batteries which are obviously running this system. in order to convince me I would need to see the entire system. but you're neglecting to show the key component, which of the batteries. so personally I would never endorse your product or believe it. but that's just me.
Why in the world would you show all this with this huge explanation and have no load on the thing with no we cannot see the amperage everything is moot I get it you're trying to sell things
In summary the capacitor will power a 30 watt light bulb for 1.25 hours, which is significant. I think the motor / generator setup although cool on its own merits, steals the headline of what the capacitor does.
I understand you are using the latest "skelcap batteries" that hold a far greater charge than standard super/farad caps. But most likely you will discharge rapidly power supply if you were to put any load output of those coils/ bridge diode rectifiers. The red button on the motor shuts off the run capacitor after the AC motor rises to nameplate RPM, There is nothing special here.
Okay.... powering the motor to run open circuit toroids.... all your having to do is beat the resistive turning force of your motor. I bet once you try to put a real load to the outputs, the torque will increase to the point it shuts it all down... So effectively, you just showing you can keep the motor spinning in a free wheel condition....for an hour. Does that have a purpose? If you are not charging or loading the toroids, and showing actual work done... then not doing anything but free wheeling the motor.
This is a nearly Lenz free application. You can load the toroids all you want, even totally shorting them out, and the motor will not slow down. How's that for a purpose?
@@PMMG4HYBRID Then please show us that if that is the application. I have a need for such a device, but this only seemingly discusses your rewiring and the running of the drive motor... that's great, but I was looking to see if the shaft of the motor is loaded (such as when providing electromotive resistive forces) how does the system reacts. If it is free of resistive force then show that please, it's not been my experience.
I guess what I want is what's in the title... If it generates, then show me the generation ability. I have not had such experience at such seemingly little drive efforts. I would like to actually see the generation in a couple examples. Thanks
I always love your work Mike, I had hoped during the "lockdowns" we would see something from you. I hope you and your family have a blessed holiday season.
Thank you so much, and to your family as well.
@Simon Messer it's tragic... He has some really cool stuff
Is anyone out there taking up the torch for Mike now? Where do we go to see even a shadow of Mike’s work? MIKE YOU rest in peace brother. An amazing man ❤️
I have already drawn up the drawings, ready to mass-produce high-power generators, I refer to Mike's ideas
Has he passed on? Maybe somebody can get some of the schematics from somebody he knows. I hope not it sounds like he was good and healthy and doing fabulous work
Mike Kantz the inventor and designer past away on April 13th. We have a go fund me under the name Sarah Kantz to help keep things going. Thank you to everyone who supported Quanta Magnetics
I'm sad to hear this. I was really interested in his tech.
I’m so sorry for your loss. Any possibility of anyone continuing on Mike’s work?
Wow so sad to hear this. Damn... another great inventor gone, before he finally revealed the secrets...
I am very sad to hear this. Hopefully you could put all his left things someday online for the world not to forget your husband / or father Father...
Many thanks in advance. My deepest condulence. Regards, Stefan.
Was he getting the jab ?
Hello Sherri my name is Zion, I am curious is there anyone I can contact to keep some of his research, I have very similar research tech Im in final stages of developing and I wanted to know if there is any equipment Q Mag Generators or the Graphtie Plate Capacitors I could help either move forward and or buy some samples to test along side my developments. If so please let me know here.. My condolences to you all and Mike and all of his family. Mike did some amazing work! Thanks Zion
Great work Mike. Congrats!!!
Thanks for sharing. Quite a difference in sound when you switch to the inverter
Always interesting designs here. You're selling your things and it's great for you and innovation. But I dream that one day you create your own HUGE electric powerplant. I just imagine if you add a solar pannel farm with this ( but way bigger for a whole city... the future is here)
Solar is archaic at this point and creates more toxins in the environment for a small reduction in CO2 emissions... We could do so much more if we create thorium-based nuclear powerplants and they are the cheapest option and cleanest option in the long-run, even able to take the nuclear waste produced by the older nuclear power plants.
@@silviafox78 and How much this powerplant cost removing grass? takes carbon? how much electronics does it take? :) no radioactive incidents? You're dreaming! Go take a walk around Chernobyl powerplant for 15 minutes ;)
@@realcourte - good question. Usually Thorium-based Nuclear power plants have a higher startup cost compared to coal, oil, gas plants. However it is much much cheaper to maintain them over the long run as they do not have to pay high prices for oil, coal, or gas and can recycle old spent nuclear fuel rods of our older Uranium-based fuel rods which is basically free-to-a-good-home unless those older nuclear plants prefer to bury their fuel rods for over 10,000 years, instead! But even then older depleted uranium and thorium is much cheaper to rely on especially considering how expensive it is to sequester the Carbon emissions produced by the system. Overall the cost comes out to about the same or less within a couple decades and leads to a cleaner and cheaper source of energy for future generations.
I assure you I am not dreaming and 15 minutes in chernobyl has been found to be safe at the moment for researchers and such.
@@silviafox78 I know that atomic energy is safe... until something happen. Then go take a ride around the japanese nuclear reactor that exploded ( 2 outa 5 if I remember well). France got some too. But where will be the next incident? That, you don,t even try to understand this dilema cause miles away from the problem. You're thinking is "It's safe" BUT you are miles away from nuclear catastrophes. Solar panel don't explode and let some grass grow around them. While your "safe thing" just chew the environment beneath and around it ( not even ONE tree). I think Mike got something and with just a small xtra amount ( no nuclear powerplant please) of energy could go beyound his small scale prototypes. A small look at something that went wrong here ( and ugly as hell): www.thebalance.com/thmb/sPM7O1-RFVjewOD2QpNBMWuiZlc=/3000x2011/filters:fill(auto,1)/3-mile-island-nuclear-plant-56a9a7ef5f9b58b7d0fdb625.jpg
Impressed doesn't even scratch the surface......
keep up the great work your allsome if i could work for any body it would be you you are definitely ahead of your times my friend future Generations will greatly appreciate the work you have done here
his videos are impressive...
Couldn’t you run that 40v from the 3rd phase of the motor through a buckstep down to ~16v and keep the voltage up on the capacitor bank?
Thank You for All that you are doing for Humanity...
Peace.. Shalom.. Salam.. Namaste ..
🙏🏻 😊 🌈 ✌🌷 ☮️ ❤️ 💐 🕊
I tried to visit the website but the domain is down. I was really interested in buying some of the graphene super caps those things are out of this world. I hope it will be available for sale again soon!
Someone said in a reply to a comment above that he has passed away
It's like a generator, with extra steps.
R.I.P
Michael Allen Kantz
Now we wont ever know, how advanced this wouldve became!!!
Condolences to His family. I read the obituary of Mr. Mike A Kantz
2:10. Could you please explain what you mean with bridge ractifier and rotary transformer? Sketch would be nice. Did you use a regular 4 kW AC motor or did you have to change anything?
bridge rectifier converts ac to dc ,when you rotate motor with power on 2 windings the 3rd winding acts like a transformer and makes power out put like a generater ,,you can use this method to make 3 phase power with single phase supply .
@@bohydrus7108 are you sure about that? You cannot spin an AC cage motor with DC current. You can with one AC phase but if you put a bridge rectifier in front, this won't work. It might if you use PWM. So, I am not sure if this is correct. The BR might be used to rectify the 3rd phase that is used as a secondary to feed a battery or so.
@@lektor6910 he is using the rectifier to change the voltage coming out the 3rd winding to dc lol ,,no not spinning ac motor with dc
i need to watch this few times to comprehend...wow you should route the system to recharge the 16v graphene powerpack
Was just about to leave message saying sane. Recharge the 16v at sane time could run indefinitely?
@@btekwindsolar You have to note however, there is absolutely NO load being applied.... so its just freewheeling, not even charging the batteries.
@@SV_Sangha correct
Grphene super cap amzing technology .supper explain
why not just plug the graphene cap module into the MPPT ???
I need something to power my solar batteries at night. I live in the Pacific Northwest, we don’t have sun for 12 to 14 hours in the winter.
Do you have something that could help me with that? I need something that I can hook up to an MPPT to charge my batteries at night.
I don’t know if anybody makes a self running generator to do this.
Aku suka semua karya Rakitan kamu kawan,
Kerja kamu sangat Rapi dan bagus..
👍👍👍❤️
Thanks for your great ideas and products. Thought you had medical problems. No updates for a long time did you go work for tesla. He could use your battery. Hope all is good .hope you'll find time to answer private questions.Glad to see your ok. Nt
Very nice, you have done well over the years. I must reach out :D
I can do MCU compute, I understand you do require to work towards an ECU which will even more so improve in many areas of operating the machine at peek, automated :D
Thanks for always interesting videos!
I wonder where all the energy comes from? T Henry Moray writes in his book, THE SEA OF ENERGY IN WHICH THE
EARTH FLOATS,
"IN THE FINAL ANALYSIS
RADIANT ENERGY IS A MEANS OF USING THE ENERGY RELEASED BY THE FISSIONABLE
REACTIONS TAKING PLACE IN THE STELLAR CRUCIBLES OF THE UNIVERSE." Capitalization is by the author for emphasis.
What happens when under load ? Interesting..
Awesome! Keep doing more!
Fascinating product. But why do you have excessive amounts of ads on your own website? 🤔
I thought you fell off the Earth. Haven't had any updates from you in months
Hey Mike! Cool solution! I have a question regarding the GS module - What would be the easiest way to install that on bicycle? What kind of motor could you suggest with that? If want more volt engine should I add some coil to convert or need batteries or smthg? How would charging it back by the pedaling would work?
I have no idea what you said. Pretty cool though.
need to watch few times he talking at 60miles per hour..
Crazy RAD!
Great work Mike and great video, very interesting.
Any chance we'll see a home generator for sale at some point. I can see where this is going.
The question is, could you cycle this configuration indefinitely by alternating between the energy in the power grid or a powerful battery bank for a few moments and then return to the 16v module for an hour as shown in the video? If so, how much power is there left to utilize on electrical loads? I'm intrigued by this possibility. Could this be done?
Yes, and I'm working on it.
Spectacular
@@PMMG4HYBRID Unfortunately you took your secrets with you into your grave, when you passed away... Too bad.. we are missing your ingenius videos.....RIP Mike Kantz.
@@oudotcom What!? Do you know how he died if you don't mind me asking? That is awful.
@@PelletJamie :( did he pass away?
Неплохо. Молодец!
There is a pretty strong motor. So why not extend the shaft another 4ft and put more coil generators on it?
You could why not try it!
@@m1rroredgesharpeningservic546 Its all about finances. There are other things i need at the moment. But thanks. Smile
The motor will consume more power. As shown there is no load.
You n Gerard Morin should go for coffee.
Pretty slick setup, I wonder if you could make a stargate for that big motor.
*Wow Mike ! What an achievement in electrical efficiency. Regarding the Graphene 16 Volt module; I am assuming there is some way to recharge the energy stored in it ? Can you elaborate on how this works and how much you are selling these Graphene Moduals for, please ?*
Yes, you can channel the rectified DC output back to the source of input (Graphene Module) providing that it is voltage compliant and an isolated circuit such as the dual toroids are. www.shop.quantamagneticstore.com/16V-2000F-Graphene-Supercap-Module-GRPH-mod.htm
@@PMMG4HYBRID Unfortunately all your links are broken... Is your server down ?
@@oudotcom someone said in a reply comment above yours that he has passed away
@@pbandjelly1311 Странно все кто такими вещами занимаются погибают.
How to tell me you like to overcomplicate things without telling me you like to overcomplicate things🤣
try looping back the access energy(if any) and connect the load.. if "lucky" you should get the Kapanadze generator/transformer effect.. 40Watts in >> 5000 Watts out :))
I'm already in mass production, it can be done，40Watts in >> 5000 Watts out
I heard he passed away, RIP Mike, you went too soon.
Hey Mike I would love to collaborate with you on an EV project that I think could benefit from your tech. Perhaps we can team up in the future.
Address not found!!!!?????
This will sound like I did not see your old videos but here it goes: Are you able to tell me the loss on the inverter? Is there a way of reducing that loss?
Has some one picked up where he stope😅d ? 😅
website is down....did he go out of business?
Skip to 11:13 to see what this video is about.
could you install a deep cycle battery system to keep the capacitor topping and the motor generating?
So basicly the Red unit /device on the left is the speed controller to tune it down to the speed that efficiency but still produce the most power? Instead of 4 magnets, if you make 8 or 12 magnets would it produce more power? because more magnetic field? or no need? thanks
Am I missing something?
Why not route the 40vdc back into the super caps? Or at least part.
But this is sufficient tech as is to rectify our global fuel “crisis”.
Nice
Hi Mike, are you yet producing this generator to sell it?
All this appears to be awesome. BUT, the big question, in my opinion is, can this machine setup SELF RUN and still give out excess energy and if Yes, how much in watts? Because that is what matters, finally. Having Solar in the background will obviously cover up any shortages and come out as excess. Thank you.
Lol, no it cant. You're going to lose 10% in the inverter, 10% in the motor, and 10% in the generator assuming everything is 90% efficient , which it surely is not.
Notice he didnt put any load on the motor here. Im sure that motor can run free at 30 watts or so without issue. 30 watts in will never equal more than 30 watts out. If the thing could self run he wouldnt need to sell you supercapacitors.
Yes this type of machine could self run. The Rotoverter is consuming a low amount of energy, the generator part is probably generating way more than the Rotoverter needs to run.
@@damianjones6546 "Probably" generating??? 😅😂😄
@@damianjones6546 Repeat after me:
POWER OUT
IS NEVER
MORE THAN
POWER IN
Got it?
(except fusion, eventually)
@PMMG4HYBRID Unfortunately you took your secrets with you into your grave, when you passed away... Too bad.. we are missing your ingenius videos.....RIP Mike Kantz.
Man i went to look at the store because i was planning to buy a device but sad to hear that. Is there anything anywhere i can purchase these or something similar? Sad to hear that.
Sooo....why do you need the big motor again? Why not just something big enough to run the generator coils?
This completes the task while idling at 28-30W @ 1770 rpm and has a 50 lb armature/flywheel. Also under a mechanical load, it will deliver up to 1.8hp on demand. No little motor can offer this.
Do you have a Gearbox for with it.
Can harness Lightning with ion transformer too!.
why is your samlex pulling out 60 volts ?
What brand of inverter are You using. I have 3 different brands, and they overload when attached to my graphine cap power?
The little 300W inverter is a Samlex Pure Sine Wave. They make larger inverters too.
You may want to try Reliable Electric. They are a lower end inverter but they can custom set input voltage to your specs. A 4 s NMC will be similar to your needs
So how many watts of power can you pump into the batteries in one hour?
Hi. I want to move me and myself from salt lake City Utah to Huntsville Alabama.
Using an electric vehicle that I'm building.
I want to use a generator like yours.
Want to help?
Mike, what capacitance did you find most efficient for start and what is running phase of this motor? Thanks. BTW we got your idea that this is all for demonstration of how powerful 16v ultracapacitors bank that your are selling is. Its fantastic!
Web page not working btw great work !
once the cell drops to 11volts can it be charged again?
I have a problem accessing your website.
I actually meet the guy who made this generator.
Is he still alive? No one can get ahold of him /:
Is there a way to send power back to the supercapacitor to keep it running at peak indefinitely?
Nope. He is just efficiently running a ‘battery’ until it dies.
Anything that produces energy can be looped.
So your just running a system with a “battery” efficiently until it dies (gets below 11 volts).
What’s the point?? Please let me know.
Efficiency!!!! This channel is groundbreaking tech!
Website link is broken
awesome! what's appened tut shop? ont website?
Is it safe to hook a bunch of these graphene super capacitors in parallel or even series? I'm wanting to use them for a massive instantaneous draw on a electric drag racing motor setup. (They only need a few seconds of massive output, I figure since they're discharge rate is better than lithium batteries for their weight, I'd have an advantage?)
Yes and yes.
Why i can't i get your stuff to buy if its real ?
🙏
It sounds quiet but it also sounds complicated for off-grid Builders. Can't wait to buy it how much is it?
what happened to your store?
nice
How much do these cost?
Can I get a price
Look at Moto Flux motor.
Graphene?one atom thick,,,not easy to find some
I feel sick with all the camera jerking around. STOP!
RIP
How can i contact you?
Ok Good👍
nooo,Please,IDontWantToBeAstonished.
IThinkIAmNotA.I,LikeMajority.
WITTS on youtube
Mike if your out here I don't know I was told you had a problem. If you or family answers this I would like to talk to someone. You have my e mail .hope someone gets back to me. Thanks Ntpr
O
how can i run my house for 24hrs every day
😮👍👍❤️🧐
AnD..........?
macro joul thief =D i like
here's the problem with what you're doing. you're using a solar panel, but you're neglecting to show the batteries which are obviously running this system. in order to convince me I would need to see the entire system. but you're neglecting to show the key component, which of the batteries. so personally I would never endorse your product or believe it. but that's just me.
Wow good produk
Why in the world would you show all this with this huge explanation and have no load on the thing with no we cannot see the amperage everything is moot I get it you're trying to sell things
I love your work. But can you live totally offgrid with anyone of them? For at least 10 years to come?
Hoil grails 😉
In summary the capacitor will power a 30 watt light bulb for 1.25 hours, which is significant. I think the motor / generator setup although cool on its own merits, steals the headline of what the capacitor does.
I understand you are using the latest "skelcap batteries" that hold a far greater charge than standard super/farad caps. But most likely you will discharge rapidly power supply if you were to put any load output of those coils/ bridge diode rectifiers. The red button on the motor shuts off the run capacitor after the AC motor rises to nameplate RPM, There is nothing special here.
Okay.... powering the motor to run open circuit toroids.... all your having to do is beat the resistive turning force of your motor. I bet once you try to put a real load to the outputs, the torque will increase to the point it shuts it all down... So effectively, you just showing you can keep the motor spinning in a free wheel condition....for an hour. Does that have a purpose? If you are not charging or loading the toroids, and showing actual work done... then not doing anything but free wheeling the motor.
This is a nearly Lenz free application. You can load the toroids all you want, even totally shorting them out, and the motor will not slow down. How's that for a purpose?
@@PMMG4HYBRID Then please show us that if that is the application. I have a need for such a device, but this only seemingly discusses your rewiring and the running of the drive motor... that's great, but I was looking to see if the shaft of the motor is loaded (such as when providing electromotive resistive forces) how does the system reacts. If it is free of resistive force then show that please, it's not been my experience.
I guess what I want is what's in the title... If it generates, then show me the generation ability. I have not had such experience at such seemingly little drive efforts. I would like to actually see the generation in a couple examples. Thanks
@@SV_Sangha Will do!
🙏🙏🙏❤️🙏🙏🙏
Sorry... You to so much talking. Not easy and not Simply Demonstration.
Sorry Broo... 🙏🙏🙏🙏🙏🇮🇩🇮🇩🇮🇩🇮🇩🇮🇩🇮🇩