HOW A AUTOMATIC FILTER WORKS

Hello guys more educational videos coming every week.
Stay tuned to AdventureStory Channel.
Don't forget you are the Channels Heart.
I like when you interact with comments.
------------------------------------------------------------------
Be part of Adventure: / @adventure-story

[@gerarddesilva8617]

Good day thanks for the Info, but in the middle of explanation your voice was gone..

[@Adventure-Story]

Thank you!

[@matibulislam4903]

Nice and informative. It will be more helpful if you provide a set of instructions regarding cleaning procedure.

[@agthunderbolt5686]

My Friend thanks for your good works. Excellent explanation plus opportunity for studying of English! Thumb up))and all time +++++

[@Adventure-Story]

Thanks!

[@lakheswarsahu5239]

Nice one sir...

[@Adventure-Story]

Thanks!

[@ЕвгенийКузьменко-р4з]

I also wanted to dance, but there's no sound :(((
Thank you

[@seax-pedition864]

Good day,
For the candle filter, how long must it be in the ultrasonic bath?

[@Adventure-Story]

Inrahim hello ,the best time is from 4 to 8 hours depends also how dirty is your filters always check for any small holes in filtera or any damage if so replace immediately.
Also very important is tightening of the cover of the filters there is specified torque for that if you don't tight proper filters will be sqeezed and damage will occur.So be carefull always tightening and good condition of filter elements.Use appropriate chemicals for ultrasonic bath so this will go deep in filters and wear personal protective equipment when use of Chemical.Thanks !

[@panagiotis-hunting-running]

⚓️👍

[@pablitojr.tormis7752]

Please review your vedio sir some part of it is mute ,thank you

[@Adventure-Story]

Thanks Pablito!

[@marimani90]

No sound please reupload again

[@Adventure-Story]

Hello my friend i will check it!

[@Adventure-Story]

I quick words there is located fine filters reall small mesh micrometers.There is a timer set on equipment and a differential pressure switch also there is installed a counter.Timers is set to blow fillters every two hours and change position.In case there is a differntial pressure switch trigger also fillter will be blow and change by shift device.Some systems are connected to ship alarm system in that case you will have a alarm.Normal every day you should check the counter how many times fillters was washed by the system.Normally it is 10 to 14 somewhere inside this number .In case there is more number you should immediatlly clean the filters or replace them with clean one
Thanks!

[@marimani90]

Adventure Story thank you so much

[@marimani90]

Where ur getting all these videos

[@Adventure-Story]

@@marimani90 i try to find online mostly i download them from library material!