+Stevo Hoppa Thanks!! I know I should make the second part, I also want to make a demo of how it sound's, I'll see if I can make a video within this month!
I like the way you made the cheekblocks for the ends of the keyboard. It looks like you've got a little room if you need it should you upgrade the keyboard.
Can You please tell me the measurements for the side piece? (I have the exact same piano as you and i'm trying to figure out the best measurements for it)
this is the exact kind of piano shell i want to see because most of them dont cover the full piano and i hate it but this one is beutiful it looks like an upright piano
a couple of years late , but hope you read this , i currently have a yamaha EW310 , the speakers are on top , would covering the speakers affect the quality of the sound comimg from the speakers ?
Hey, I just loved it !!! Congratulations!! But tell me how did you install the sustain pedal if it has a plastic base under the pedal ?? How did you remove it? And can I do the same with a Casio CDP 120? And put a speaker inside the piano to sound like an acoustic piano?. Thank you so much!!!! Congratulations
It shouldn't matter all too much what type of wood you use so long as it supports its own weight + the weight of the keyboard, and isn't going to break by simply tapping it a few times. The reasons being because it uses speakers instead of strings, so the type of wood isn't going to change the resonance of the sounds very much, and in his instance, he painted right over it. A hardwood like oak would probably do you best unless you have any special plans to stain and varnish the wood to leave the nice grain look on it. If that's the case, make sure to clear coat after doing all that (or you waste the time and effort you did staining), and pick a wood that is strong enough, and you like the look of.
Hi, I'm sure it's possible to build one to fit a P-35 but unfortunately I do not have plans at this stage, I am planning on making some because a lot of people have asked but I can't say when it will be done. I will post a download link in the video description when the plans are done :)
Oh men, I will be very thankful if you can do this. I need the plans because I have no one affinity with woodwork and then I will have to ask someone to do, and that's why I need the plans. I want to ask you one more thing, I think that the sound, in the video part 2 was a little stuffy, but maybe it was because the recording conditions, so what was your impression about the sound with the "box"?
Oh men, I will be very thankful if you can do this. I need the plans because I have no one affinity with woodwork and then I will have to ask someone to do, and that's why I need the plans. I want to ask you one more thing, I think that the sound, in the video part 2 was a little stuffy, but maybe it was because the recording conditions, so what was your impression about the sound with the "box"?
Ohh you kidding😁. Please tell me how or where did you put that support for keyboard to . You didn't show in this video. Actually i am also making the same one .
![[Live] : ONE FIGHT NIGHT 24 “จาร์เร็ด vs กุสตาโว”](http://i.ytimg.com/vi/ENNA-fsT67c/mqdefault.jpg)
Awesome job! That's extremely impressive that you were able to do all that by only looking at pictures!! I'm ready to see part 2.
+Stevo Hoppa Thanks!! I know I should make the second part, I also want to make a demo of how it sound's, I'll see if I can make a video within this month!
+Viaan Van Graan That would be great! I'd love to see the update.
This is amazing! Some people are called geniuses for being the smartest person on the planet, but I think you deserve to be called a genius as well :)
It's really beautiful. Nice work!
Super cool project. Great work!
Wow! Great job!!!
Really2 creative and genius. This is inspire me to make my own custom stand.
Nicely done.
You are very creative , amazing really
Thanks much .... Will try to build one....nice work... Just awesome
nice work!!
Parabéns pelo trabalho... ficou muito bom!!!
..congratulations to your new Yamaha Clavinova! ;)
Pretty, badass!
I like the way you made the cheekblocks for the ends of the keyboard. It looks like you've got a little room if you need it should you upgrade the keyboard.
I loved!!
Yeah, you're the boss!!!
I would love to have your blueprint and measurements... That looks crazy awesome.
Can You please tell me the measurements for the side piece? (I have the exact same piano as you and i'm trying to figure out the best measurements for it)
I love this video
very impressive! (the sustain pedal actually goes on the right) nice job! greetings
+Erwin Muller Thanks! I know I put it in the middle for ascetic reasons until I have the others :)
Bravo!
Awesome!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
awesome job...wish I could do it too
Thats a great Job!!!!!!!!!! I want to build one . Thats why im on here lookin for ideas but the lid is what will give me trouble lol
very very good
Wonderful job! I don't understand the mecanism/build of cover key lid, can you explain?
Good job! How did you make the lid slider?
beautifull job dude ! is there a wooden board under the keyboard ? is it enought solid ?
this is the exact kind of piano shell i want to see because most of them dont cover the full piano and i hate it but this one is beutiful it looks like an upright piano
Great job, man! I'd like to build the same cabinet for my wife's Casio digital piano. Can you condivide your plans?
Very nice. I wish I could figure out how you made your lid over the keys. I'm fixing to build something similar for my yamaha p125
a couple of years late , but hope you read this , i currently have a yamaha EW310 , the speakers are on top , would covering the speakers affect the quality of the sound comimg from the speakers ?
Very nice touch with the keyboard cover. Is that hinged or does it slide back?
I like me encanto 😘👏🏻👏🏻👏🏻👏🏻
Perfecto ! I'd realy like to share with us the measurements and everything needed :)!
It looks better than the original one.
Great job. amazing. but... there are no mesures or plans? :(
Hey, I just loved it !!! Congratulations!! But tell me how did you install the sustain pedal if it has a plastic base under the pedal ?? How did you remove it?
And can I do the same with a Casio CDP 120? And put a speaker inside the piano to sound like an acoustic piano?. Thank you so much!!!! Congratulations
a digital piano, especially the cheapo models will never even get close to an acoustic piano. if you want acoustic sound buy a used acoustic piano
oh...waooooo
Yay
Can you send the draft with the project measures to my email? Please I need this!!!
can you tell us the measurements?
nice nice nice!!!!!!!!!!!!!!
that's crazy :-))
Me gusta
Buy the softy pedal too
Very good job!
is loud speaker aiming to the floor? how is sound?
yes how is sound ? more acoustic now than before ?!
Did you cut the ends of the CDP 230 off? I think that would make it fall apart.
Nope did not cut anything the ends can unscrewed very easily without the rest falling apart.
bro can u pls tell me which wood u had used..
It shouldn't matter all too much what type of wood you use so long as it supports its own weight + the weight of the keyboard, and isn't going to break by simply tapping it a few times. The reasons being because it uses speakers instead of strings, so the type of wood isn't going to change the resonance of the sounds very much, and in his instance, he painted right over it. A hardwood like oak would probably do you best unless you have any special plans to stain and varnish the wood to leave the nice grain look on it. If that's the case, make sure to clear coat after doing all that (or you waste the time and effort you did staining), and pick a wood that is strong enough, and you like the look of.
hello can u give us the measurements ???
Hello would you please give the dimensions
AWESOME JOB but the sustain pedal shld be on the rightmost hole
Thanks! and yes I know I just placed it there temporarily until I had the other two. :)
Viaan Van Graan i would have done the same as you as i have OCD... lol. Keep it balanced
I have a P-35. It's possible to make this on him? Do you have any tutorial in pdf maybe with all part to do?
Hi, I'm sure it's possible to build one to fit a P-35 but unfortunately I do not have plans at this stage, I am planning on making some because a lot of people have asked but I can't say when it will be done. I will post a download link in the video description when the plans are done :)
Oh men, I will be very thankful if you can do this. I need the plans because I have no one affinity with woodwork and then I will have to ask someone to do, and that's why I need the plans.
I want to ask you one more thing, I think that the sound, in the video part 2 was a little stuffy, but maybe it was because the recording conditions, so what was your impression about the sound with the "box"?
Oh men, I will be very thankful if you can do this. I need the plans because I have no one affinity with woodwork and then I will have to ask someone to do, and that's why I need the plans.
I want to ask you one more thing, I think that the sound, in the video part 2 was a little stuffy, but maybe it was because the recording conditions, so what was your impression about the sound with the "box"?
Can you send the draft whith the Project measures to my email. Please.
I have Yamaha P35
I wish i can tell my dad to build this
Wow!!!! Great carpentry work. CDP 230 Casio, not good idea. Congratulations.
Dimensions of the upper side pieces?
I still didn't get where is the keyboard support
Magic! my dear friend ;)
Ohh you kidding😁. Please tell me how or where did you put that support for keyboard to . You didn't show in this video. Actually i am also making the same one .
so... no measures or sheets :(
The funny part is that your stand is higher quality
can you sell these? Ill pay whatever youre bargaining for
WOW..!! hahaha.... :D
Bon boulot. J'en ai réalisé un aussi mais type table salle à manger !
th-cam.com/video/eiBID8tZNYc/w-d-xo.html
Pointless. The idea of the Clavinova in weighted keys.
What do you mean?
U stupid, the casio cdp 230 is also a DIGITAL PIANO, that means it does have FULLY WEIGHTED keys.