Best Airplane of The Year New WLtoys A300 Beech 550mm D17S RC RTF EPP 4CH Biplane Brushless Motor
ฝัง
- เผยแพร่เมื่อ 3 ธ.ค. 2023
- Specification:
Brand: WLtoys
Product code: A300-Beech D17S biplane
Product Description: 3D/6G System Imager
Product material: High strength composite material (EPP)
Wing span * aircraft length * height (mm): 550 * 487 * 220mm
Color box size approximately (CM): 60 * 24 * 19CM
Aircraft weight (with battery) :240g
Gliding flight time: about 8 minutes
Charging time: approximately 50 minutes
Remote control mode: 2.4G remote control
Remote control distance is about (meters): the remote control distance radius is 150 meters, and 6 AA batteries are used for remote control (excluding)
Number of drive motors: high-efficiency brushless motor 1806 * 1
Battery details: 7.4V 600mAh 25C
Charger details: dedicated USB data cable
Features:
1 EPP+engineering materials, World War II Deech D17S biplane high simulation camera
2 1806 strong magnetic brushless motor, with super strong power. 2g high-precision digital servo, quick response and fast locking.
3. The remote control is controlled by an independent potentiometer, providing a more precise and comfortable handling experience.
The
4. aircraft adopts a 6-axis gyroscope, attitude locking, and 3D/6G mode conversion, suitable for flying in different scenarios. Air mode conversion, which combines beginner mode and stunt flight mode. The blades, motors, and wings can be disassembled for easy replacement.
5 aircraft has multiple flight modes
1) Outdoor 6G level flight mode: The default mode for takeoff is 6G self stabilization mode. The gyroscope is self stabilized and the heading is locked, making it very suitable for beginners to practice flying in fixed wing mode
2) Outdoor stunt mode: After the aircraft flies horizontally in the air, the button switch switches to 3D or advanced mode, and the aircraft enters 3D stunt or advanced mode (3D lock mode). Both modes can easily perform stunt actions such as somersaults and death spirals.
6. The body is equipped with LED lights to fly freely even at night, and the remote control can also control the lights with one click.
7. The landing gear is installed in the front and rear rubber clip slots, which can be used for taxiing and landing in special circumstances. It can also be used for outdoor taxiing and takeoff, directly entering fixed wing mode.
8. High capacity and high magnification 7.4V 600mAh 25C lithium polymer battery, with a glide flight time of about 8 minutes.
9. Aircraft and remote control low battery alarm, more effective protection of batteries from being discharged. During the flight, it is possible to land safely in advance to avoid excessive battery discharge leading to flight loss. Flight control has added a loss prevention function. When the aircraft flies beyond the effective distance of the remote control, it will enter a hovering state in the air. If the remote control is not operated, the aircraft will maintain the current altitude and hover from the maximum radius to the minimum radius. Before the battery power is depleted, the aircraft will automatically land.
10. The rack adopts a fast installation and disassembly structure for easy portability, and the remote control can be switched between left and right hands. “
Package included:
Color box * 1,
Polylon packaging * 1,
remote control * 1,
starter manual * 1, data cable * 1,
propeller * 1
wing * 2,
battery * 1,
body * 1,
front landing gear * 2,
rear landing gear * 1,
cross screwdriver * 1,
open end wrench * 1,
Allen wrench * 1 - บันเทิง
This is quite a nice looking EPP plane but it has several issues straight out of the box. The all-up weight (including landing gear) is just OVER 250gms. Even with the stock battery shoved hard forward as far as it will go it is a bit tail heavy - makes it very pitch-sensitive and balloons on landing. COG should be at least 85mm from the trailing edge of the upper wing - possibly more!
Luckily there is plenty of excess foam around the battery slot to clear out for heavier batteries.
Like its stablemate the XK A280 P-51 (different flight board and protocol though + NO operable satellite sockets on this + protocol NOT available yet for Multi Radios!) this seems a little under-powered/under-propped. The P-51 (same motor and ESC) can take a 7x5 2-blade for MUCH better performance. (Gets a little hot though so probably best to limit it to a 6x5.5.) 6-inch props give better ground clearance anyway.
Some folks have even driven both these with 3-cell batteries and seem to have gotten away with it. However this is risky since the full battery voltage is fed from the stock ESC to the flight board (no BEC on the stock ESC) and the board reduces that to 5v for the servos and 3.3v for the flight board electronics. Might be best to use a 3s to 7.5v buck convertor for safety. Or, if you can find it, a different ESC with an on-board 7.5v BEC.
Nice little plane!
tie some strings and we can Dog fight! 😉
Surprise 😮 ! Nice aircraft but sadly its electronics do not allow binding with other transmitters. It has a S-bus port too but, unfortunately, it's non-functional. Too bad, but one is stuck with a toy-transmitter.
I just flew it yesterday morning. Initially, it's good but somehow i don't know why the plane banks left too quick and almost crash. I flew under gyro mode. After i calibrate it, the plane becomes slightly unstable. I had adjusted the CG too. For the second round, the plane banks in too slow and almost hit the tree. Then i stop flying it. Open and check and fix everything again but i try to fly it tomorrow.
Can not stear on the ground, makes some take offs.."interesting " until the air rudder kicks in. 😮
What size is the propeller ?
Great video ! Just waiting for mine to arrive ! How do you think it performs as stock (unmodified) ?
Fun and easy to fly!
Is this boat as easy to play as the Volantex BF 109?
same level of easiness and more fun because it is brushless, so it have more POWER!
I have a question regarding on how to assemble it with the servo connector, as you can see there are 3 holes there in the tail rudder and the aeleron, which hole should I choose to put the servo wire or steel to steer?
I put the most outer hole… because it is less sensitive… you can move in gradually if you require more sensitive / play in the control surface..
@AndyYuenRC what do you mean by less sensitive? You mean if it's in the outer hole it means it can fly more stable than it's in the center hole it will fly harder? Is it what you mean?.💗
@@JaiKun-ts1ue you are correct!