Drilling procedure for UNIQA Dental Pure & Porous Implant UH8 UV11 [ 3.75 mm D4 density soft bone ]

🦷 Uniqa Dental Drilling Protocol uniqa.dental/w...
🦷 IMPORTANT! To properly install Uniqa Dental implants, a specific protocol for preparing the implant site must be followed. The video demonstrates the necessary steps for installing a 3.75mm diameter implant in D4 density soft bone.
First, a hole should be drilled to a depth of 1-2mm in the hardest cortical bone layer using a special cortical bone drill. Then, a pilot drill with a 2mm diameter should be used to drill the hole to its full depth, which is usually up to 10mm. The recommended rotation speed is 1000-1200 revolutions per minute, and moderate pressure should be applied while drilling, with intensive irrigation to cool the drill and bone.
Next, drills of increasing diameter should be used in order to widen the hole to the required depth. For example, a 2.5mm diameter drill helps to drill half of the depth of the hole, and a 2.8mm diameter drill - a quarter of the depth of the hole. If there is resistance from the bone, the drill should be replaced, as it may have become dull.
It is important to use water during drilling to avoid overheating the bone and causing thermal necrosis of the bone tissue after implant placement. After this, the implant should be installed in the hole. The aggressive thread profile of Uniqa Dental implants allows them to be screwed directly into the bone tissue, providing good primary stability. The maximum permissible torque when installing the implant is 50 N*cm. It is important to carefully follow the recommended guidelines.
Visit Uniqa Dental site uniqa.dental/?...
More videos on this topic:
The dental implants is placed on the smile line? • The dental implants is... .
From a broken bar to screw retained restoration: • From a broken bar to s... .
Cemented restoration vs Screw Retained restoration in lack of space: • Cemented restoration v... .
How to avoid bone loss in screw retained restoration? Using dental materials in case: • How to avoid bone loss...
#dentalimplantsprocedure #dentalimplants #dentalimplantplacement #dentalimplantsvideo
#dentalimplantprocedure #implantdrillingprocedure