@@obligatoryurl Can i contact you for any doubts regarding Q ground control development .. I request you to kindly provide me with your contact details to my email id vmallikarjun99@gmail.com . Thank you very much.
This is 1000x better than the Indian guy who asks you to like & subscribe. Then proceeds to dance around the problem for 10 minutes before giving you a cut & paste from stack exchange.
Does you now how to add an i2c sonar sensor? i've got 4 GY-US42v2 Sonar in a splitter, then i connected the output of that splitter to the original splitter of the main i2c port provided by the pixhawk 2.4.8. I still can't find how to configure or add that four sensors in QGR. Hope you or anyone else can help me please.
Is there any possibility to get the live video (comes via T10 Radio via USB UVC) direct into QGC? (like in Tower worked or also worke with the skydroid app) IT would be that helpfull!
I have a Patreon (www.patreon.com/oneonlygriffin ) that goes largely unused since I've been pretty slow on this channel, I don't recommend giving money to me honestly. I have a couple videos on my MPCNC coming up but my QGroundControl series is in limbo which I will be talking about soon.
I got many issue with Qt in windows build qgc. But was more easy build with QT in linux (QT 5.12.6). In windows I use QT 5.15.2 MCVS 2019 64 bit. Got issue always when build. I have install visual studio 2019 also. Search many time on the forum but not yet get clean answer.
Nice video. At least most of it. That’s the presentation. You can edit forever to make it perfect. The content is very apropos. One suggestion. Please make the screen fonts larger. And keep publishing.Thank you.
I saw that there was this "custom build" inside the very same repository, which allows an easier """user friendly""" customization of QGC. Do you know anything about it?
No and it doesn't seem to make much sense to me. Everything I've done myself is pretty deep into the software and I don't think the custom build architecture supports that.
I am stuck on this error for too long - any work throughs for this? :-1: error: argument unused during compilation: '-std:c++11' [-Werror,-Wunused-command-line-argument] jom: C:\Users\Mavrick\Desktop\old\build-qgroundcontrol-Desktop_Qt_5_15_2_MSVC2019_64bit-Release\Makefile [obj\QGroundControl_pch.obj] Error 1
I'm not quite sure what you're asking here. QGC will build with 5.15 but it will also throw a lot of warnings. There's no reason to build with 5.15 over say 5.14 or 5.13.
I am planning to use ROS2 with Fast DDS in my companion computer, in this case do I need to install Mavlink? I have read px4 guide page and there was always a Mavlink for Flight Mode etc. And I confused. Could you help me with this issue?
![fellow fellow - พรุ่งนี้ไม่มีใครรู้ feat. INK WARUNTORN [OFFICIAL MV]](http://i.ytimg.com/vi/QP6JyjYx_W0/mqdefault.jpg)
Your fans are waiting for your next video... including me ... good work, keep inspiring many like us
Working on episode 2 about adding a UI button currently
@@obligatoryurl Eagerly waiting for your future videos ... Keep up the good work
@@obligatoryurl Can i contact you for any doubts regarding Q ground control development .. I request you to kindly provide me with your contact details to my email id vmallikarjun99@gmail.com .
Thank you very much.
@@obligatoryurl Thank You so much that would be a great help.
This is 1000x better than the Indian guy who asks you to like & subscribe. Then proceeds to dance around the problem for 10 minutes before giving you a cut & paste from stack exchange.
Indian guys get so many people through college it's not even funny
Very detailed and easy to understand :)
Thank you! I am currently working on the next episode but it's taking some time.
In my case project error: sdl2 development package not found
What can i do
Thanks！It helps me a lot.
:)
Does you now how to add an i2c sonar sensor? i've got 4 GY-US42v2 Sonar in a splitter, then i connected the output of that splitter to the original splitter of the main i2c port provided by the pixhawk 2.4.8. I still can't find how to configure or add that four sensors in QGR. Hope you or anyone else can help me please.
Is there any possibility to get the live video (comes via T10 Radio via USB UVC) direct into QGC? (like in
Tower worked or also worke with the skydroid app) IT would be that helpfull!
Have u figured out how to do this?
LINK : fatal error LNK1181: cannot open input file 'obj\QGCMapEngine.obj' Please help me
What to do if the submodule init and update didn't work?
Do you have somwehere where we can donate to you. Thank you so much for your work here I have been looking for this
I have a Patreon (www.patreon.com/oneonlygriffin ) that goes largely unused since I've been pretty slow on this channel, I don't recommend giving money to me honestly. I have a couple videos on my MPCNC coming up but my QGroundControl series is in limbo which I will be talking about soon.
Hey there i want to work on customize the Qgroundcontrol for my project i need your help with respect to QT can you please help me with that
I got many issue with Qt in windows build qgc. But was more easy build with QT in linux (QT 5.12.6). In windows I use QT 5.15.2 MCVS 2019 64 bit. Got issue always when build. I have install visual studio 2019 also. Search many time on the forum but not yet get clean answer.
Hey I am doing it in linux with QT 5.12.6 but when I run my program I am unable to see QGC map. Can you help me out?
@@loveshgoyal7774 do you have good internet connection when run qgc?
@@palacita135 thanks for the reply! It was sorted out
Nice video. At least most of it. That’s the presentation. You can edit forever to make it perfect. The content is very apropos. One suggestion. Please make the screen fonts larger. And keep publishing.Thank you.
Episode 2 of 11 is in the works. I'll keep this in mind as I continue these, thanks!
I saw that there was this "custom build" inside the very same repository, which allows an easier """user friendly""" customization of QGC. Do you know anything about it?
No and it doesn't seem to make much sense to me. Everything I've done myself is pretty deep into the software and I don't think the custom build architecture supports that.
I am stuck on this error for too long - any work throughs for this?
:-1: error: argument unused during compilation: '-std:c++11' [-Werror,-Wunused-command-line-argument]
jom: C:\Users\Mavrick\Desktop\old\build-qgroundcontrol-Desktop_Qt_5_15_2_MSVC2019_64bit-Release\Makefile [obj\QGroundControl_pch.obj] Error 1
What about gstreamer, open GL, and other dependencies?
How can i connect my qt project and mavlink
Hey please make next video of adding button on application.
I have 9 episodes planned and #2 will be about adding a button. These videos take time and that's something I don't have much of right now.
@@obligatoryurl come back please
Hi, I did everything but it gives this eror can you help me
:-1: error: Unsupported Windows toolchain, only Visual Studio 2017 64 bit is supported
Check that you have Visual Studio 2017 AND its C++ component installed. If that doesn't work, the kit in QT Creator may be set up wrong somehow.
bro you should continue it
I will. My employer wants to have a say on these and we're figuring out how we want to go about that. Just taking some time.
How long does the release build take? And what processor do you have? It's 16 minutes on ancient Phenom 2 X4 with all 4 cores.
Maybe 4 or 5 minutes with a 3950x.
Can you tell me about select component of QT 5.15 ,Plzzzzzz.
I'm not quite sure what you're asking here. QGC will build with 5.15 but it will also throw a lot of warnings. There's no reason to build with 5.15 over say 5.14 or 5.13.
I am planning to use ROS2 with Fast DDS in my companion computer, in this case do I need to install Mavlink? I have read px4 guide page and there was always a Mavlink for Flight Mode etc. And I confused. Could you help me with this issue?
Yes. Check out MAVROS. The ROS 2 branch for MAVROS is still in development but it does include Mavlink already.
@@merveuzun4612 yer istasyonu programlamak gibi bir ihtiyaç içerisinde değilim ve PX4 kullanmayı bıraktık.
@@karatugba tamam teşekkür ederim
i cant select msvc2019
how can i download QT without paying?
Bro, please make next video. Thanks first...
Consider it done.th-cam.com/video/b_8E8ckPdPA/w-d-xo.html
@@obligatoryurl Thanks bro very much. I watch it.
hi i what is this problem ??LINK : fatal error LNK1181: cannot open input file 'QGCMapEngine.obj' ...how can i solve