Nice work and video! Maybe what could be improved is your throttle management while crawling because it is quite jerky and uneven 😉👍🏻 Waiting for my MN-D99s to arrive . . . they got a 260 motor and fully proportional throttle and steering now. However I will switch out the electronics as I want to use my personal transmitter. It will be a 25A ESC and a size 2435 3300kv brushless motor 😎
@@AddyRCBuddy haha that's funny so many people and video s hard to keep track I have you subbed now so I will know when you do a video I rc you tube community is so great✌🏻😀👍🏻
Hey Adventure Time RC! What size action figure fits inside the MN 90? Your mods are cool. I’m going to start my build of a couple of these, thanks for putting up a upgrade vid!!
Thanks allot its a 3 3/4 action figure with the legs cut off at the knees there great truck s allot of fun to build hope you have a great day my friend 👍🏻💯👊✌🏻
@@AdventureTimeRC 😁Hi I am pretty sure it's the same can size maybe just longer some of the same toy trucks like this have 130 motors and some put the better 180 ones in them.
I gotta compliment your truck. It's beefy looking and nice. Two questions though. Did you lift it? And for a driver what did you use is it a GI Joe? I used a GI Joe for my wpl c24 but I know the scale is different and I'm looking to find a driver that looks decent it one of those MNs like yours. Thank you!!
Thank you very much yes it has a small lift I put on oil shock s and for the driver it is a knock off give Joe a no name figure I just ordered the mn45 kit so will be doing a built series with it to thanks for watching 😀👍
@@AdventureTimeRC thank you for your reply and for the information I have been debating on whether I should get one of these or one of the Fayee 003s simply because it looks a little lifted but I don't like the Fayee because when you remove the top it has a back wall that you cannot remove but after seeing yours I know I could make the MN look just as awesome. Well once again thank you for your video and you've done a great job! I'm the kind of guy that likes to take something like this you know a cheap RC truck and make it into something extraordinary so I greatly admire what you have done with yours cuz it seems like you have done the same! Keep up the great work!
Hi Brent - I really love what you have done to the body - your detailing is excellent amd makes a massive difference - cool how you used some cheap hardware for some of the finishes - the cable idea is brilliant, as is the rear bumper. Looking good on the trail. It almost seems like you need to slow it down a little - can you reduce the gearing? The oil shocks you mentioned will be a good addition too - this D90 is going from strength to strength! All the best !!! Thumbs up buddy! :D
Thanks mark i do think you can get a 2 speed gear box as far as the stock boxs go's you just shove the motor in a socket no screws so i might be out of luck there it is a jumpy little guy i was suprised thats the stock motor and gears hope to keep improving this d90 glad you liked the video thanks for the great comment👍👍🚙
Omg wow hope mine turns out to be as good as yours 😱 fantastic Details and amazing trail run, can I use your video in my description on my video to show everyone what you can do with this Rc 👍 great video, loved every minute of it 👍😍👍
I like venom batteries, i tried a zee battery from amazon dirt cheap not sure what all sizes they come in but so far it's as good as an expensive battery, looks good, nice detail,👍
these: www.ebay.com/itm/4pcs-Upgrade-Track-Wheels-Spare-Parts-For-1-16-WPL-B14-C24-Military-Truck-RC-Car/371916143047?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 are about 1/8" shorter height, but offset near 1/4" wider, and near 1/2" more total width, may help not tipping over sideways as easily. the tires themselves do soften up some with a long bagged session wet with WD-40. edit: these: www.ebay.com/itm/A285004-Aluminum-Shock-Absorber-for-RC-1-16-Car-Set-of-4-Black/273444473375?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 are a pretty nice fit to MN-D90, may need to trim 1.5 or 2 turns from the coils for mounting vertical, they can also mount tops tipped in about an inch.
Any real Land Rover driver wonders what with the steel cable should also the Ramm protection is questionable and at the rear what is it? Ok it's just a toy car and everyone can let their imagination run free. But really nice then they just made the model look original and not so messed up. The stickers and the light is good
Yeah but you can't expect allot out of a 45$ kit for what it is it's fun I like to look at it cool hard body thanks allot for watching I appreciate it ✌🏻😁👍🏻
Man I didn't realize it was that long ago you built this guy.. Great vid Brent.. 😎👍
Lol yeah It was a while go I had lots of fun with it always thought it was a good looking body thanks for watching Paul
Nice work and video! Maybe what could be improved is your throttle management while crawling because it is quite jerky and uneven 😉👍🏻
Waiting for my MN-D99s to arrive . . . they got a 260 motor and fully proportional throttle and steering now. However I will switch out the electronics as I want to use my personal transmitter. It will be a 25A ESC and a size 2435 3300kv brushless motor 😎
Nice details and build.
Thanks allot I really appreciate it I am doing the MN-45 build now 😀👍
What a transformation!! And props to hardware stores😉
Thanks allot I really enjoyed building this one I ordered the mn45 kit so I can build it a friend thank you for the great comment 👍😁😀✌
I changed my suspension, yours looks like it’s holding up really well! Rover looks great!
Thank you very much yes still working good
Looks great.Nice work👍
Those upgrades on that thing look awesome! Nice spot to go trailing and awesome run! Really good driving! Awesome video like always!
Thanks allot my friend👍🚙😁
Awesome build. One of my inspiration for mine. Thanks for sharing :D
Thanks allot I appreciate that my new friend 👍🏻😀✌🏻
Just saw that i left a comment before 5 months on this video, and now a new one hahaha
@@AddyRCBuddy haha that's funny so many people and video s hard to keep track I have you subbed now so I will know when you do a video I rc you tube community is so great✌🏻😀👍🏻
@@AdventureTimeRC Yeah thank you man, for sure..just wanna start with my new build on channel :D keep up eye on notifications :p 😸
Wow, it looks great. 👍😃👍 Nice crawling too. 👍😃👍
Thanks allot i have had so much fun with this cheep truck and thanks for the comment👍😁🚙
Great run my friend awesome upgrades looking very nice
Full watch and Like
Hope you have an awesome day👊👊✈️
Thanks my friend you to👍💣😁🚙
Nice job man..... looks really great! Crawls pretty good too... 😉👍🏻
Thanks allot cheep fun🚙💣😁
Great work! Looks really cool!
Thanks man fun cheep wheeling thanks again for the shout out and the pin👍🚙💣😁😁
Awesome video
Thanks allot 😁😁👍
Looking good my friend👍😊👍😊😎
Very nice attention to detail. Have you upgraded the axles/diffs?
Thank you very much still stock they gave me any trouble so I left them alone 👍🏻😎😀
That thing look pretty good. Nice build man.
Thanks allot for watching👍👍🚙
Awesome dude it's looking really good! Looks good out in the wild too
Thanks allot man makes a good cheep trail rig👍😁🚙💣
Brent, I just grabbed one of these super cheap. Any recommendations as to upgrades.
That is cool Thad same stuff as a big crawler just a bit smaller I know the parts support for these is much larger than it was when I built this one
where did you get, to put the side and back windows you bought the pieces or did you say you would say thank you
All I did was cut plastic from the front of clear toy packages and glue it in place thanks allot for watching ✌🏻🤘🏻👍🏻😀🙁
Brother that looks awesome
Thanks man its allot of fun
Pretty sweet upgrades looks good out there on the trail
Thanks my friend for a cheep truck its a blast to drive👍👍💣🚙
Nice video! What frontal bumper did u use? Where can I find it? Thanks ;-)
Thanks its made by yeah racing for a 1/10scale rig but it fit good probably find it on line i got mine at the local hobby shop🚙🚙
Adventure Time RC thanks!
Hey Adventure Time RC! What size action figure fits inside the MN 90? Your mods are cool. I’m going to start my build of a couple of these, thanks for putting up a upgrade vid!!
Thanks allot its a 3 3/4 action figure with the legs cut off at the knees there great truck s allot of fun to build hope you have a great day my friend 👍🏻💯👊✌🏻
Adventure Time RC: Thanks for the tip, hoping to make a cool beach crawl. These trucks look better with a driver! Take care👍🏾
😁👍 cool doesn't this model use the 130 motor? If so you can get the 180 motor and put it in for more power.
I think it does take a 130 is the 180 a diffrent can size this one just pushes up into a socket on the gear box
@@AdventureTimeRC 😁Hi I am pretty sure it's the same can size maybe just longer some of the same toy trucks like this have 130 motors and some put the better 180 ones in them.
my kit arrived few days ago with a 180 motor in it
what bumper did you install?
It's a yeah racing bumper for a 1/10 scale I cut the stock bumper down to fit inside ✌🏻👍🏻😁
I gotta compliment your truck. It's beefy looking and nice.
Two questions though.
Did you lift it?
And for a driver what did you use is it a GI Joe? I used a GI Joe for my wpl c24 but I know the scale is different and I'm looking to find a driver that looks decent it one of those MNs like yours.
Thank you!!
Thank you very much yes it has a small lift I put on oil shock s and for the driver it is a knock off give Joe a no name figure I just ordered the mn45 kit so will be doing a built series with it to thanks for watching 😀👍
@@AdventureTimeRC thank you for your reply and for the information I have been debating on whether I should get one of these or one of the Fayee 003s simply because it looks a little lifted but I don't like the Fayee because when you remove the top it has a back wall that you cannot remove but after seeing yours I know I could make the MN look just as awesome. Well once again thank you for your video and you've done a great job! I'm the kind of guy that likes to take something like this you know a cheap RC truck and make it into something extraordinary so I greatly admire what you have done with yours cuz it seems like you have done the same! Keep up the great work!
Thank you so much doing custom work on cheap rc stuff is fun 👍😀
Hi Brent - I really love what you have done to the body - your detailing is excellent amd makes a massive difference - cool how you used some cheap hardware for some of the finishes - the cable idea is brilliant, as is the rear bumper. Looking good on the trail. It almost seems like you need to slow it down a little - can you reduce the gearing? The oil shocks you mentioned will be a good addition too - this D90 is going from strength to strength! All the best !!! Thumbs up buddy! :D
Thanks mark i do think you can get a 2 speed gear box as far as the stock boxs go's you just shove the motor in a socket no screws so i might be out of luck there it is a jumpy little guy i was suprised thats the stock motor and gears hope to keep improving this d90 glad you liked the video thanks for the great comment👍👍🚙
@@AdventureTimeRC Cool - looking forward to see this truck improving even more!
Omg wow hope mine turns out to be as good as yours 😱 fantastic Details and amazing trail run, can I use your video in my description on my video to show everyone what you can do with this Rc 👍 great video, loved every minute of it 👍😍👍
Thank you so much my friend yes you can use my photos no problem 😁🤘👍
Thanks bro, I'll put a link on the top of the comments section and on the description 👍😊👍 thanks bro, 👍😊👍
@@TonysRcTechboom thanks my friend I appreciate the shout out
Nice upgrade big thumbs up my friend XD
Did you upgrade your transmission into 2 speed transmission?
No its the stock one that came with rhe kit
love ur channel new sub and hit the like,nice tips I would never think of anything like that that's cool
Awesome thank you so much ill get ya back i appreciate the support thanks for the great comment🚙🚙🚙🚙
you are so very welcome and the truck you have i thinks its the m90 i be getting one soon
I like venom batteries, i tried a zee battery from amazon dirt cheap not sure what all sizes they come in but so far it's as good as an expensive battery, looks good, nice detail,👍
Thanks allot i like allot of off brands to i just had these and they fit good👍👍🚙
Nice! Left a like
How long is run time on the rc car
I custom built mine I get about a half hr out of it thanks for watching my friend 👍🏻😀👊💯
Where did you get the driver from
It's a no name Walmart army figure thanks allot for watching my friend ✌🏻👍🏻😁😀😎
@@AdventureTimeRC thanks no walmark in England 😂👊
@@thekartman1 lol try army figure on Ebay
@@AdventureTimeRC will do 👍
Where did you get the parts
Ebay for most some at the local hobby store
I imagine the bumper is 1/10th?
these: www.ebay.com/itm/4pcs-Upgrade-Track-Wheels-Spare-Parts-For-1-16-WPL-B14-C24-Military-Truck-RC-Car/371916143047?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
are about 1/8" shorter height, but offset near 1/4" wider, and near 1/2" more total width, may help not tipping over sideways as easily. the tires themselves do soften up some with a long bagged session wet with WD-40.
edit: these: www.ebay.com/itm/A285004-Aluminum-Shock-Absorber-for-RC-1-16-Car-Set-of-4-Black/273444473375?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 are a pretty nice fit to MN-D90, may need to trim 1.5 or 2 turns from the coils for mounting vertical, they can also mount tops tipped in about an inch.
Thanks for the links ill check it out👍👍💣😁🚙
Nice...
Any real Land Rover driver wonders what with the steel cable should also the Ramm protection is questionable and at the rear what is it?
Ok it's just a toy car and everyone can let their imagination run free.
But really nice then they just made the model look original and not so messed up.
The stickers and the light is good
part apa saja yang sudah dimodifikasi kawan?
Im sorry i don't know what your comment says i only know English
@@AdventureTimeRC What part have been modified?
@@GMS86_RC i have added oil shocks extra lights bumpers weighted front tires added window and sun roof thanks for you comments😁😁🚙🚙
Wow what a terrible drive train with all that jerking and gear slipping
Yeah but you can't expect allot out of a 45$ kit for what it is it's fun I like to look at it cool hard body thanks allot for watching I appreciate it ✌🏻😁👍🏻