This is just high grade content from start to finish. Reminds me of some old school How-To videos. Deccribe what you are building, some quick blue prints, and then detailed instructions anyone can understand. Great work!
I like that you explain what you were doing and did the work yourself unlike all these other channels which are just dudes flexing how much money they spent on contractors and all the expensive stuff they store in the structures. Thanks for actually making an informative video for people looking to do this themselves.
WOw, this is a great DIY tutorial, Thanks for posting. I am in the middle of adding an attached storage shed to the back of my Loafing shed, and this is as close a comparison to my project as i could find. Thanks again.
I'm only a few minutes in but I can tell you put a lot of effort into the planning, the timelapse, and doing CAD renderings overlaid on the video. It's really well produced, no idea why I haven't seen your channel before! Subbed
Good video. I'm actually looking to combine two of your video series so thank you for posting. I have a 22' raised bed along my garage. I want to frame it out like your lean to shed, and add panels like your green house. Plus a couple of other modifications to make growing and harvesting easier. It will be a raised bed lean-to green house
Thank you, thank you. Nice work on the foundation and the paver floor. While it may take more time the pavers are certainly easier on the body than mixing, pouring and troweling a slab.
You make this look so simple, I'm now thinking that future shop project needs some concrete! Especially the pipe bending and blade-less saw were awesome tips. Thanks for all the work you put into your videos as always!
Excellent work and excellent video! You did an awesome job on this and detailed your work very well for us. A+ on this one! Look forward to the next video in this series.
Thank you very much Tom! I so appreciate your support and kind words. I have to admit, I struggled with this video. It took way longer than I expected to whittle it down to a reasonable length. When I looked through and assembled all the footage I was just not feeling that I had a good episode here -- and right to the last minute I had doubts. So, to read a comment like yours (and others here) is a true blessing. Cheers, Kent
That's an excellent, no compromises example of a solid foundation. It'll be there long after you're dead. Do you regret using the capstones? Why not just concrete? Cost? It looks great and the nice thing about the stones if that spills will disappear into the cracks.
Very nice work. I totally get what you mean about the price of lumber. Like you I bought quite a bit of lumber last year for projects that I'll complete this year so pretty lucky on that front!
Better to go a bit above when doing formwork for concrete. Seen too many times people trying to half ass it and they ending having to rebuild it correctly. That's also a good way to install the anchor bolts for the wall. It's always best to do it right the first time.
Thank you! Do you need to get a permit and inspections when you build addition to your existing shed? Does the total SF of the shed include the addition? In our county and state any structure above 200 SF must get a permit. What software do you use for 3-D drawings and animations? I like a lot your raised beds concrete design. It can be assembled and disassembled like a Lego. But I’m hesitant to use Concrete in the permanent form like you use here to support walls. Any concrete structure like this to disassemble require to break concrete and deal with all the broken concrete to load and properly dispose or collect the junk on your yard. Please give the solution to my question.
@@MANaboutTOOLS Thank you for the reply! Did you get a permit for this project? You are doing amazing things with SketchUp software, including animations. Thank you so much for your thoughtful process and Research before making things, so others do not have to.
Everyone wants to do a good solid job but for the weights involved in a timber framed building was the concrete foundation really necessary ? Would a timber floor standing on paving slabs with a good membrane beneath be sufficient to support a timber framed building ? I recently built decking for a hot tub and worked out that the tub plus 4 people in it would be something like 1.5 tons, in a relatively small footprint. I have only mounted it as described above and 3 year on its as solid as the rock of Gibraltar. .
I was thinking the same thing! I have DIY lumber racks for 2x4 walls and will be hanging them on the long wall. So an access door near the corner would be a good addition. Thanks for the comment.
Thank you for the great instructions you provide. I really enjoy your videos. However, I have a question. How do we weather proof the sides which back up against the back wall. I’m anchoring my shed to the wall of my house. I have a brick veneer house, but the concern would be the same regardless of it being weatherboard or brick veneer. My concern is when it rains directly in that area (back house wall) or when the wind pushes the rain in that direction, it will rot out the back wall. Does anyone here have any ideas or suggestions to deal with this? Thank you guys in advance 🙏
That is one heck of a job. Lots of calories burned, for sure. So, how much did this foundation cost? And how much do you think you saved by doing it yourself?
Thanks Bill. I haven't worked out the costing for this. And, I'm not a pro so I'm sure if I did this every day I could find a faster and cheaper way to build the forms.
Dear lord. I thought my dad was bad about forms for concrete. Yeah. A little bit over built, like a target is my dad and you is Empire State Building. However, with concrete, it’s way better to over build forms than under 💯. Honestly no shade at all.
It was a reinforcement and repair of the existing shed foundation. I propped up some plywood and drilled a few holes in that foundation and tapped in some short rebar sections. So that repair would be permanently attached to the old foundation wall.
I don't know what part of the country this was built in but without plastic under the floor, moisture rising out of the ground could become an issue inside that shed.
The author does like to from scratch, th-cam.com/users/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.
Came on here to watch how to cheaply add a shed extension. I Think I picked the wrong video as this project cost more than my house and we are only on step one in this video LOL
@@MANaboutTOOLS Hello I get that so maybe making a series of videos will be best than just making one half way...I hope u understand my point of view as a viewer eager to learn from the master.
@@MANaboutTOOLS I follow your channel because i want to learn from you, since u are for real in doing the projects...but i get disappointed when there is one or two parts of the project that are "Blank"...no explanation, no showing how to...and please remember that NO all of us are too savy like you to know the ins and outs of construction or more advance how to projects...
![Build a Lean-To Shed [Part 3- Finishing - Roof, Siding, Doors]](http://i.ytimg.com/vi/lF2ihrrWI5M/mqdefault.jpg)
![Build a Lean-To Shed [Part 3- Finishing - Roof, Siding, Doors]](/img/tr.png)
![Build a Lean To Shed Extension [Part 2- Basic Framing - Walls and Rafters]](http://i.ytimg.com/vi/J66T4R_wADw/mqdefault.jpg)
![SAFEPLANET - ดาวเคราะห์ [ THE PLANET ]](http://i.ytimg.com/vi/4X1XL3I_k3c/mqdefault.jpg)
I appreciate the in-depth details, cad/ sketch up graphics, and calm demeanor. Also the dark sarcasm at the end👍🏼
Thank you! Cheers, Kent
This is just high grade content from start to finish. Reminds me of some old school How-To videos. Deccribe what you are building, some quick blue prints, and then detailed instructions anyone can understand. Great work!
"... and we may need to remortgage the house to purchase the lumber." 🤣
My back would be F-R-I-E-D!!!🥵 You two are work horses! The base looks amazing! Well done! Like the use of pavers for this floor.
Thanks very much!!
Nice to see that the kitty cats inspected the foundation!!!
I like that you explain what you were doing and did the work yourself unlike all these other channels which are just dudes flexing how much money they spent on contractors and all the expensive stuff they store in the structures. Thanks for actually making an informative video for people looking to do this themselves.
Can’t wait for the next episode, thank you so much!
WOw, this is a great DIY tutorial, Thanks for posting. I am in the middle of adding an attached storage shed to the back of my Loafing shed, and this is as close a comparison to my project as i could find. Thanks again.
Glad it was helpful! Cheers!
You are a machine, don’t need to buy one. That’s a lot of work you did. Keep it up.
Thanks 👍
Svaka pohvala majstoru. Perfektno izvodi radove. Bravo
This is awesome!
The perfect mix of doing and telling.
I understand what it takes to do this (vid series) and I appreciate you
Great detail & commentary.
Hope you got a rockin deal on those concrete toppers.
Looks good.
Great video. The caps as pavers look awesome. Thanks for sharing this.
Thank you! They certainly were more work but I agree that they look good.
Amazing as always , you sir are a boss
I will be stealing that rebar bending technique. Thanks,
You are a wizard
Excellent as always.
You should look into the truck bed unloader if you plan on buying more gravel mulch or dirt. One of the best purchases I've made.
I have watched several of your videos and admire both the content plus your professionalism in video making. My hat is off to you! Well done.
Thanks!!
Looking good so far.
I'm only a few minutes in but I can tell you put a lot of effort into the planning, the timelapse, and doing CAD renderings overlaid on the video. It's really well produced, no idea why I haven't seen your channel before! Subbed
Good video. I'm actually looking to combine two of your video series so thank you for posting. I have a 22' raised bed along my garage. I want to frame it out like your lean to shed, and add panels like your green house. Plus a couple of other modifications to make growing and harvesting easier. It will be a raised bed lean-to green house
I'd be tempted to leave the walls open, like a gazebo, to show everyone who visits how cool the base looks.. It's really nice. 😁👍
Brilliant job you 2 have done
Y’all have done an awesome job.
Thank you, thank you. Nice work on the foundation and the paver floor. While it may take more time the pavers are certainly easier on the body than mixing, pouring and troweling a slab.
You make this look so simple, I'm now thinking that future shop project needs some concrete! Especially the pipe bending and blade-less saw were awesome tips. Thanks for all the work you put into your videos as always!
Thank you very much!!
that sawzall trick is one i'll have to keep in mind.
Great job. Lots of hard work. You two make a great team.
Thank you very much!
You do very good work my friend. Bravo
Thank you! Cheers!
Nice job !! I'll be doing this job soon for the same reason. My shop is full too !! Thanks for a down home GOOD job and video !!
Excellent work and excellent video! You did an awesome job on this and detailed your work very well for us. A+ on this one! Look forward to the next video in this series.
Thank you very much Tom! I so appreciate your support and kind words. I have to admit, I struggled with this video. It took way longer than I expected to whittle it down to a reasonable length. When I looked through and assembled all the footage I was just not feeling that I had a good episode here -- and right to the last minute I had doubts. So, to read a comment like yours (and others here) is a true blessing. Cheers,
Kent
I really like your detailed videos keep up the good work 👏
Thanks, will do!
You have an interesting channel. I subscribed to you. It's great that TH-cam recommended your channel.
Welcome aboard!
Beautiful work! Looks amazing.
Magical experience.......! Thanks..
That is an excellent new project, Kent. I look forward to the succeeding episodes. You are such a motivated worker.
Thanks so much Phil!
I really enjoy your channel and your great videos, nice work!
Love your content.
That's an excellent, no compromises example of a solid foundation. It'll be there long after you're dead. Do you regret using the capstones? Why not just concrete? Cost? It looks great and the nice thing about the stones if that spills will disappear into the cracks.
Thanks! I should have used regular driveway or walkway pavers. Did consider just a concrete floor as well.
Very nice work. I totally get what you mean about the price of lumber. Like you I bought quite a bit of lumber last year for projects that I'll complete this year so pretty lucky on that front!
Thanks! I'm hoping the prices come down. The commodities chart for lumber has been falling lately.
Better to go a bit above when doing formwork for concrete. Seen too many times people trying to half ass it and they ending having to rebuild it correctly. That's also a good way to install the anchor bolts for the wall. It's always best to do it right the first time.
Thank you! Do you need to get a permit and inspections when you build addition to your existing shed? Does the total SF of the shed include the addition? In our county and state any structure above 200 SF must get a permit.
What software do you use for 3-D drawings and animations?
I like a lot your raised beds concrete design. It can be assembled and disassembled like a Lego. But I’m hesitant to use Concrete in the permanent form like you use here to support walls. Any concrete structure like this to disassemble require to break concrete and deal with all the broken concrete to load and properly dispose or collect the junk on your yard. Please give the solution to my question.
I can't comment on the permit requirements. Will vary greatly place to place. I use Sketchup Pro for drawing.
@@MANaboutTOOLS Thank you for the reply! Did you get a permit for this project?
You are doing amazing things with SketchUp software, including animations. Thank you so much for your thoughtful process and Research before making things, so others do not have to.
That's a lot of work for a small shed extension. I've seen houses that didn't get that much detail....lol
Everyone wants to do a good solid job but for the weights involved in a timber framed building was the concrete foundation really necessary ? Would a timber floor standing on paving slabs with a good membrane beneath be sufficient to support a timber framed building ? I recently built decking for a hot tub and worked out that the tub plus 4 people in it would be something like 1.5 tons, in a relatively small footprint. I have only mounted it as described above and 3 year on its as solid as the rock of Gibraltar. .
That was interesting. It's nicely done. I would have poured the floor in concrete though.
Thanks! I was considering that but, I don't have a lot of experience with pouring floors.
Great video - fingers crossed for getting yourself that backhoe. :D
Maybe add a pass through window for lumber, not sheets ,for easier access.
I was thinking the same thing! I have DIY lumber racks for 2x4 walls and will be hanging them on the long wall. So an access door near the corner would be a good addition. Thanks for the comment.
Thank you for the great instructions you provide. I really enjoy your videos.
However, I have a question. How do we weather proof the sides which back up against the back wall. I’m anchoring my shed to the wall of my house. I have a brick veneer house, but the concern would be the same regardless of it being weatherboard or brick veneer. My concern is when it rains directly in that area (back house wall) or when the wind pushes the rain in that direction, it will rot out the back wall. Does anyone here have any ideas or suggestions to deal with this? Thank you guys in advance 🙏
Do you need a permit to add to a shed?
That is one heck of a job. Lots of calories burned, for sure.
So, how much did this foundation cost?
And how much do you think you saved by doing it yourself?
Thanks Bill. I haven't worked out the costing for this. And, I'm not a pro so I'm sure if I did this every day I could find a faster and cheaper way to build the forms.
the bladeless recip saw use to vibrate bubbles up is brilliant!
we used a "donkey d**k" when building bridges.
Thanks!
Dear lord. I thought my dad was bad about forms for concrete. Yeah. A little bit over built, like a target is my dad and you is Empire State Building. However, with concrete, it’s way better to over build forms than under 💯. Honestly no shade at all.
Здравствуйте.Интересное видео.У Вас бывают холодные зимы?
Where did the concrete curb next to the door opening come from? You didn't mention it or show it being poured.
It was a reinforcement and repair of the existing shed foundation. I propped up some plywood and drilled a few holes in that foundation and tapped in some short rebar sections. So that repair would be permanently attached to the old foundation wall.
Awesome work man really love all the details
I’m curious on what software you used to design the project
Thanks! I use Sketchup Pro
If you where to estimate how much did this cost?
I don't know what part of the country this was built in but without plastic under the floor, moisture rising out of the ground could become an issue inside that shed.
What Sketchup extension did you use to do the animations of the walls and roof ? Thanks !!
There's an animation extension
@@MANaboutTOOLS Thanks - do you have the name of the particular animation extension you used ?
Re mortgage the house to buy more lumber 😂
What design program is that?
Sketchup Pro
You might have been hitting old rebar in the original foundation.
Ahhhh... maybe huh? Good though.
Why don't you just also pure the concrete floor? Way more solid and easy fast 😜
The author does like to from scratch, th-cam.com/users/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.
Wouldn't of been easier to just pour a slab 🤔
Came on here to watch how to cheaply add a shed extension. I Think I picked the wrong video as this project cost more than my house and we are only on step one in this video LOL
too bad u did not took the time to really show the rebar setting for all of us who do not what u are doing...
It's hard to cover in detail all the steps involved.
@@MANaboutTOOLS Hello I get that so maybe making a series of videos will be best than just making one half way...I hope u understand my point of view as a viewer eager to learn from the master.
@@MANaboutTOOLS I follow your channel because i want to learn from you, since u are for real in doing the projects...but i get disappointed when there is one or two parts of the project that are "Blank"...no explanation, no showing how to...and please remember that NO all of us are too savy like you to know the ins and outs of construction or more advance how to projects...
^^
WaYYYYY too much, overkill to say the least. But then again people were very bored during the pandemic....
What would you do differently?
Awesome. Well done ,well filmed and well narrated video. Excellent.