Im pretty sure with those controllers when you are using a coil sensing probe that you cannot initiate defrost unless coil is cold enough i think its under 32⁰F.
So, I have an older traulsen reach in freezer. it has an analog timer that runs the defrost cycles. The mechanical control presently is simply set up with 1 sensor in the coil box and it only activates the compressor. I just want to simple add an electronic control to replace the old white rodgers. Can I use this model?
I have purchased a Temperature Controller ERC213G online to replace the one in our compressor air dryer. After installation and testing, the controller is working fine. However, I need the defrost output to connect to a water drain valve, which is already connected. The problem is that I can’t find the menu O61, and the quick set menu is also not visible. Additionally, when I tried accessing the Parameter group “P”, it showed “non”. I need to set the defrost parameters for my use. Please consider my problem as urgent and provide the details for menu activation.
Hello sir I'm your subscriber. I'm also refrigeration technician and kitchen equipment. Also ac technician. I'm willing to join your company. Currently I'm here in Qatar.
Nice video thank you. I am definitely going to look into the danfoss control.
Me too.
Very nice control. Lots of different setting and temp probs.. lots of water on door. Will need more defrost cycles.
Great video. Much appreciated in N. Central AZ. Trying to find info on Dixell Universal controller.
Im pretty sure with those controllers when you are using a coil sensing probe that you cannot initiate defrost unless coil is cold enough i think its under 32⁰F.
That's correct. If your S5 sensor is at a higher temp than your D02 (defrost stop temp), it won't defrost.
Nuevo suscriptor hermano que cables del compresor debo conectar el controlador y como enérgizo el compresor a la vez
So, I have an older traulsen reach in freezer. it has an analog timer that runs the defrost cycles. The mechanical control presently is simply set up with 1 sensor in the coil box and it only activates the compressor. I just want to simple add an electronic control to replace the old white rodgers. Can I use this model?
Great vid as usual.
Great video.
You have done a great job kudos.
Can I adapt it to any type of Compressor?
Do a video on making that cut out for the control.
How did you cut out the opening for that controller in that panel?
I have purchased a Temperature Controller ERC213G online to replace the one in our compressor air dryer. After installation and testing, the controller is working fine. However, I need the defrost output to connect to a water drain valve, which is already connected.
The problem is that I can’t find the menu O61, and the quick set menu is also not visible. Additionally, when I tried accessing the Parameter group “P”, it showed “non”. I need to set the defrost parameters for my use.
Please consider my problem as urgent and provide the details for menu activation.
What's an average life expectancy on thermister? I ask because after 2 years of installation a few are showing signs of screwing up.
Is loop for compreesor start
Overkill for a Keezer? Love the vid good job.
we want to know how to install it with temperature setting in Centigrade?
Nice retro
Hi. My display show Loc. It's like it's locked. No buttons work. What should I do?
Sir, what is readout parameters?
Great
Can you put this on a swimming pool heat pump?
Yes
Hello sir I'm your subscriber. I'm also refrigeration technician and kitchen equipment. Also ac technician. I'm willing to join your company. Currently I'm here in Qatar.
डिफरेंस सेट करने की विधि बताएं हिंदी में ई आर सी 213
r01