How to set up slacklines without trees

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ธ.ค. 2024

ความคิดเห็น • 44

  • @HowNOT2
    @HowNOT2  ปีที่แล้ว

    Check out our new store! hownot2.store/

  • @crazytimechris
    @crazytimechris 4 ปีที่แล้ว +8

    I just set up in my garden in almost exactly the same way! Thanks a lot for showing us this!

  • @Razorfish
    @Razorfish 5 ปีที่แล้ว +7

    A frames are also good if your tree is too bendy. A bendy tree can still have more than enough shear strength at the base.

  • @emilioniland7831
    @emilioniland7831 4 ปีที่แล้ว +3

    What diameter are the bolts used to build the A frames?

  • @augustinmoinat761
    @augustinmoinat761 5 ปีที่แล้ว +2

    If you're using A-frames, you might as well put the ratchet behind the A-frame. Or even not use any ratchets, just tension the line by raising the frames.

    • @HowNOT2
      @HowNOT2  5 ปีที่แล้ว +1

      That is an option for sure. I do that at home for my 1" line. We were really low to the ground and needed quite a bit of tension for some of the participants who were some big dudes.

    • @augustinmoinat761
      @augustinmoinat761 5 ปีที่แล้ว

      @@HowNOT2 you can still put the ratchet behind the frames, but I would actually be curious how much tension you can achieve with the "lifting the a-frames technique". The angles would play in your favour there, I'm expecting high numbers. Unfortunately I don't have a loadcell, do you know anyone with one?

    • @HowNOT2
      @HowNOT2  5 ปีที่แล้ว

      I could try it sometime.

  • @joeyfourfingers5078
    @joeyfourfingers5078 4 ปีที่แล้ว +2

    basically:
    'don't buy premium wood, get the cheap stuff'

  • @cristobalpalma2457
    @cristobalpalma2457 5 ปีที่แล้ว +3

    Muchas gracias, saludos desde Chile.

  • @MrEh5
    @MrEh5 ปีที่แล้ว

    Padding the top of the hang frames might be a good idea.

  • @dragan3290
    @dragan3290 3 ปีที่แล้ว

    Can I use some threaded 12mm Booker rod? I'll use my rattle gun if I have to.dewalt drives and snaps any bolt? Top idea.

  • @lahirusangeeth8536
    @lahirusangeeth8536 4 ปีที่แล้ว +1

    Hello 👋, I need a playing slack line, I can, but little, can you help me ,,?🙏

  • @tomprovan50
    @tomprovan50 2 ปีที่แล้ว

    could you use this to winch a shed?

  • @MrHassancehef
    @MrHassancehef 5 ปีที่แล้ว +2

    cool video, I missed it, it is humanly possible to install them without the impact tool, with a hand ratchet instead?

    • @HowNOT2
      @HowNOT2  5 ปีที่แล้ว +3

      Yea, that would be fine. Just takes longer.

  • @joby_obrien
    @joby_obrien 2 ปีที่แล้ว

    How long is each piece of the A-frame, about 2ft?

  • @jaredherrick1125
    @jaredherrick1125 4 ปีที่แล้ว

    What if you don't have a span set? I got a slack line as a gift, built some A frames and bought some ground anchor. Could I set it up with what I have?

  • @poetac15
    @poetac15 5 ปีที่แล้ว +1

    I'm interested in the hang frames used at GGBY in 2018. We're there any significant changes compared to the designs from previous years?

    • @HowNOT2
      @HowNOT2  5 ปีที่แล้ว +1

      You can see them at th-cam.com/video/W6w5r_6BYyM/w-d-xo.html at 2:27. The threading was tricky but they were easy to adjust and required less parts which is nice when there are so many for that festival but I don't know the pros and cons vs the previous year's setup. You can pm jerry from balance community for the details as he was the one who made them.

  • @jawoable
    @jawoable 5 ปีที่แล้ว +1

    hello, have you ever rigged a temporarly slackline in white sand? i live near a sand quarry, maybe i could put on 50m water line,

    • @HowNOT2
      @HowNOT2  5 ปีที่แล้ว +3

      Sand requires digging. Dig a hole and bury something like wood 2x4s sideways and wrap rope or spanset around it and fill the hole back in.

  • @joshdavis8447
    @joshdavis8447 4 ปีที่แล้ว

    Why are the a-frames always wooden? Can I weld/bolt a metal frame for compactness??

    • @joshdavis8447
      @joshdavis8447 4 ปีที่แล้ว

      I suspect I could even make a height adjustable frame in this case 🤷🏾‍♂️

    • @joshdavis8447
      @joshdavis8447 4 ปีที่แล้ว

      Also, many videos suggest to NOT use trees less than 18”. So why are we chopping those trees down to 2x4” to support the webbing!?

  • @ujjc001
    @ujjc001 5 ปีที่แล้ว

    So, towards the load is the direction to lean the anchor bolts? Does that only apply to threaded rod?

    • @HowNOT2
      @HowNOT2  5 ปีที่แล้ว

      Correct. Applys to this, ice screws and glue in bolts (mostly doesnt matter for those unless dealing with shitty rock). This screw in grass experience really showed why... it was very interesting.

  • @Merdi425
    @Merdi425 5 ปีที่แล้ว

    Dimensions? I'm debating if I want the line 24" or 30" off the ground. What's the longest you set this up? I'm thinking most likely 15-20 foot long for beginners of 1" feather in a primative setup since I have some webbing to spare. Thanks.

    • @HowNOT2
      @HowNOT2  5 ปีที่แล้ว

      24" is nice if people are new-ish. 30" allows it not to need to be so tight and I like it a bit looser

  • @ShurikB93
    @ShurikB93 5 ปีที่แล้ว

    I'm interested to hear from you and Andy about setting up a trickline without trees,

    • @robertjung8929
      @robertjung8929 5 ปีที่แล้ว

      bigger more massive A-frames and big robust dead man anchors should be enough for a trickline.

    • @ShurikB93
      @ShurikB93 5 ปีที่แล้ว

      @@robertjung8929 Sounds obvious, however with the massive tension in a trickline you might have catastrophic failure.
      So maybe some slack science is needed

    • @HowNOT2
      @HowNOT2  5 ปีที่แล้ว +1

      I don't recommend these lag bolts. Dead man anchors for sure! and bigger/stronger A-frames.

    • @augustinmoinat761
      @augustinmoinat761 5 ปีที่แล้ว

      We used some bigger pegs and strong A frames. The pegs were scaffolding tubes, 1m long, 5 of them.

    • @HowNOT2
      @HowNOT2  5 ปีที่แล้ว

      Were pegs hard to get out afterwards?

  • @EvanWisheropp
    @EvanWisheropp 5 ปีที่แล้ว

    Question: Why use parachord instead of say 6mm climbing chordallette? Also, wondering if anyone could explain the physics of using the threads to hold the force, rather than the leverage of the screw. I was really surprised by that.

    • @HowNOT2
      @HowNOT2  5 ปีที่แล้ว

      Because i have spools of it as my all around workhorse. See the threads holding force halfway down this website. Same reason you put in icescrews in the direction you use them and not angled. www.bolt-products.com/Glue-inBoltDesign.htm

  • @chicken_punk_pie
    @chicken_punk_pie 2 ปีที่แล้ว

    Wow I just found out you can look at comments and watch the video at the same time.

  • @uthikoloshe
    @uthikoloshe ปีที่แล้ว

    if all the anchor bolts where in line with the slack line itself that would be best.

  • @lahirusangeeth8536
    @lahirusangeeth8536 4 ปีที่แล้ว

    Please dr,

  • @tamaratamrot2681
    @tamaratamrot2681 3 ปีที่แล้ว

    I'm really sure you can build it yourself. I did this 2 weeks ago thanks to the Woodglut plans.