Great video! Only thing I would suggest is use lose the clamp and use a spade shovel with duck tape on the end. Lay the rim on a towel next to a wall. Put the shovel point next to the rim and jump on it, using one hand against the wall to keep your balance. You can break both sides of the bead in 10 seconds, no sweat. Also, 3 levers makes it a quick 1 man job. Easy peasy
This is one thing all riders need to know how to do, I’ve always mounted and balanced my own tires but it got it off the bead differently, Im gonna try your way next time.
Great video! Thanks for leaving in the times when things get difficult so we non-pro's don't feel like morons when we also hit a snag. Too many edited videos that make this look so damn easy that we are throwing tire tools through the garage wall. 😊
Everyone needs to change there tire once tho so they can learn it's better to pay your local shop but like they said unless you are a regular or know the dudes good luck getting a shop to put a wasted tire on your bike so you can drift
@@kruesioriginals when I'm watching your videos and you say you don't want to do something so Trent is going to do it I laugh. That's what I'd do if I had people!
Although I'd like to do this myself, I'll spend the $25 Cycle Gear charges to change the tire. I'm just too freakin old to want to work this hard. Thanks for posting!
I bought harbor fright one definitely easier to break the bead but was a pain in the ass to get the second bead on I pinched the tube the fist time had to replace and do it again
Bro I love your shit. I watch every video and your shop is just a vibe hahah reminds me of me and my stoner friends in the early years of riding. Good damn times. Got family in Phoenix, will swing by the shop next time I’m in town.
There’s not really any point in balancing them, but if you feel the need you can get a hang balancer at Harbor freight for like 30 bucks they were pretty good and easy to use
My employer used to make me change tires on the semi I drove... I still think it's harder to change a motocross tire. Try a 120/80-19 for a stiff sidewall😢... It's better to hit the rotor with your knuckles then the sprocket😂
@@kruesioriginals yes sir. I use them weekly. I became the tire changer for all my friends 😂. One has a fork end and the other has an end that goes into the fork part you squeeze them together and pop the bead. Then the other ends are regular spoon ends
I don’t balance Harley Davison tires I think it’s a waste of time. But you can get a Harbor freight hang balancer for like 30 bucks they work pretty good.
Is there some kind of internal balancing fluid that balances and seals punctures? If so, please put it on the website so I can order it along with the tire irons!
What about scratching the hell out of those rims?... Your better off with some real tire spoons and a few rim guards. They sell a nice kit of three rubber handled spoons and 3 thick rim guards on amazon for like $25+free shipping..
@@kruesioriginals so I was going to buy a tuner, probably the Vance & hines fp3, and a chain conversion. I found a chain conversion on ebay for 250 or 300 then I saw the kit on your site when I was looking for a tuner. Do you think it would be a bad idea to get the conversion on ebay to save a little money or should I just get the better one
I got an old(like new condition) sportster wheel and tire kicking around that I want the rubber off of and sell the wheel. Ima try this for the hell of it, good on the road skill to know but ima pay a shop to swap my Dyna’s tires, cause I ain’t risking fucking one of them up…Shit happens 🤷🏻♂️
Fun clown show. So the "advice" is to swap the tire on a different rim if you can't break the bead on yours? And to remove the brake rotor? Hope you are doing well on Planet Unicorn...
Great video! Only thing I would suggest is use lose the clamp and use a spade shovel with duck tape on the end. Lay the rim on a towel next to a wall. Put the shovel point next to the rim and jump on it, using one hand against the wall to keep your balance. You can break both sides of the bead in 10 seconds, no sweat. Also, 3 levers makes it a quick 1 man job. Easy peasy
Great video - the irony of having the tire machine in the background in the last shot was not lost on me :)
😎
Man, just graduated MMI Orlando and would love to work at your shop if I lived closer. Lots of experience and fabrication in your shop is so awesome.
This is one thing all riders need to know how to do, I’ve always mounted and balanced my own tires but it got it off the bead differently, Im gonna try your way next time.
How.do you balance you own tire?
Well …how do you break your bead?
@@brandonjones152 get the motion pro bead breaker irons
@@relevation0 thanks !
Not sure eif anyone mentioned this but wood clamps. The ones you pump work awesome for this.
This took me right back to my childhood, changing tires in my dads shop. Did my first one at 9 years old, took me 2 days 😂
You Dad was a good man for letting you work it out. I bet that paid off later in life.
@@uncountedvoter9449 it damn sure did
Great video! Thanks for leaving in the times when things get difficult so we non-pro's don't feel like morons when we also hit a snag. Too many edited videos that make this look so damn easy that we are throwing tire tools through the garage wall. 😊
It’s never easy
This is a great idea... most dealerships and indy's charge 100 dollars a wheel to mount and balance in this area...I'm changing my own next time.
$100 to mount & balance a tire !!! 😂
@@kurtfoulke5130 It’s 125 in Phoenix
Fuck. It's $50-$60 each here in Tennessee.
Great video! Y’all are great for the motorcycle community!
Thank you 🙏
Changing tires is a PITA and it's one of the things I'll gladly pay somebody else to do for me. Jake is pretty funny in front of the lens.
Amen
I own a motorcycle shop and a tire machine and I will pay someone to change my tire I hate doing it I’ve done it for way too long
Everyone needs to change there tire once tho so they can learn it's better to pay your local shop but like they said unless you are a regular or know the dudes good luck getting a shop to put a wasted tire on your bike so you can drift
@@kruesioriginals when I'm watching your videos and you say you don't want to do something so Trent is going to do it I laugh. That's what I'd do if I had people!
Hahaha I seriously enjoyed this video! Misery loves company man this is exactly how it goes, ain’t never easy.
Although I'd like to do this myself,
I'll spend the $25 Cycle Gear charges to change the tire.
I'm just too freakin old to want to work this hard.
Thanks for posting!
Amen I feel the same way
No feelings just labor !!
Motion pro also makes bead breaker levers… much easier than the c clamp. 🤓
You guys are awesome, great laugh and great info 💪
Thank you 😁
I bought harbor fright one definitely easier to break the bead but was a pain in the ass to get the second bead on I pinched the tube the fist time had to replace and do it again
That right there is why I have my NoMar Tire Changer.
Dope video. Makes me even happier to work at a shop and have access to a tire machine 😂
Hell yeah! great video guys. This is definitely a good one.
Do you have to take off the pulley and rotor to do this?
Bro I love your shit. I watch every video and your shop is just a vibe hahah reminds me of me and my stoner friends in the early years of riding. Good damn times. Got family in Phoenix, will swing by the shop next time I’m in town.
Hell yeah dude come on bye and thank you very much
What about the process for balancing the wheel?
There’s not really any point in balancing them, but if you feel the need you can get a hang balancer at Harbor freight for like 30 bucks they were pretty good and easy to use
I'm a lump, I used to put the wheel on the floor n stand on the tyre to break the bead.
My employer used to make me change tires on the semi I drove... I still think it's harder to change a motocross tire. Try a 120/80-19 for a stiff sidewall😢... It's better to hit the rotor with your knuckles then the sprocket😂
Absolute Classic... Period 🤙❤
😎
Question if you dont have an eleectric air tire inflator only a manually push pump air inflator how can you pop up the bead inside???
Push really fast and hard
@@kruesioriginals easy to say but its takes really sweat in your forehead..and too much effort in pumping the air push air inflator.real talk Sire..
Motion pro has bead breaker tire spoons that I use. No need for the c clamp and board if you use those.
That work on a Harley Davidson tire?
100% makes life so easy motion pro levers and another 1 or 2 spoons and you can break a Harley bead in 20-30 seconds.
@@kruesioriginals yes sir. I use them weekly. I became the tire changer for all my friends 😂. One has a fork end and the other has an end that goes into the fork part you squeeze them together and pop the bead. Then the other ends are regular spoon ends
im so frustrated now ill just get the bike shop too do it... lol
If you take a spade bit the size of the C clamp head and put a recess in the 2x4 that should lock it in and keep from slipping off.
i appreciate this; I dm'd you guys on instagram asking if you mount tires now i can take care of it myself.
🤘🏼🤘🏼
I put my tires in a bench vise to break the bead .. have gotten a 180 sqeezed in it..
Thanks for the easy tire change.
What tires do you like to run, and why? A few guys I ride with run Metzler's.
Awesome video. Done this before and it will suck the energy out of you.
Yep, I’ll just take them to the shop I guess
Thanks fellas!
Get that dude a bead breaker. I change my motorcycle tires with a cheap Harbor Freight tire changer
Cool, funny and helpful, how do you balance it though ?
I don’t balance Harley Davison tires I think it’s a waste of time. But you can get a Harbor freight hang balancer for like 30 bucks they work pretty good.
nice job guys👍
Thank you I’ll use it 💯🇵🇷🇨🇷😎
Nice job, now do one with a tube 👍
No way!!!!
Bahahah I laughed so hard hearing that board fall. Jake’s a Fuckin champ, thanks man loving the constant flow of content. ¡KO!
Nicely done ...
What about balancing? Do you guys use dyna beads or something else?
We don’t balance tires on the stunt bike it’s absolutely pointless
I changed my first tubeless tire on my zero turn mower last summer. I can relate to the first part of this video. "C'mon bitch!"
he usually hates the camera and he crushed it. lets go.
😂 As soon as he said come on b****.... I realized it takes a girlfriend, to change a motorcycle tire
😂😂😂
At 6:54 Ryan the boss makes a dollar, I make a dime that’s why I poop on company time
How long did this actually take ….? 😅
Balance?
What about balancing it? Any tips on that?
Is there some kind of internal balancing fluid that balances and seals punctures? If so, please put it on the website so I can order it along with the tire irons!
What about scratching the hell out of those rims?... Your better off with some real tire spoons and a few rim guards. They sell a nice kit of three rubber handled spoons and 3 thick rim guards on amazon for like $25+free shipping..
Go Jake!
just get out a sharp knife .. cut around the side of the tire in the middle of the sidewall . both sides and voila .. tire can be taken off easy now
Yeah, I'll be taking mine into a professional
I’ll just pay F#ck that
Man, I wan that thanos infinity gauntlet
😂😂 That’s how I plan on taking over the world
@@kruesioriginals 😂 heck yea dude! My son and I love thanos haha
@@kruesioriginals so I was going to buy a tuner, probably the Vance & hines fp3, and a chain conversion. I found a chain conversion on ebay for 250 or 300 then I saw the kit on your site when I was looking for a tuner. Do you think it would be a bad idea to get the conversion on ebay to save a little money or should I just get the better one
Fuck it, just take it to a shop. 😀
This is for the guy that’s burning through a tire every week that gets expensive
Get some
Fuck how I would love to meet this whole shop ! 🤘
This is fucking Epic 🤣😂🤣😂🤣
Thanks Jax teller
Bead breakers dont cost much...or make one.
Whats a good ratio to go with on a chain conversion.
Depends on what the bike is what the motor set up is what you’re doing with the bike.
@@kruesioriginals 88” i went with 21/49
@@DeadRoman 24/49
@@kruesioriginals bo wonder y’all can get wm up that easy
@@kruesioriginals i did 22/49 not 21/49, sorry
Now you gotta balance it
Didn't know kershaw rode harleys
Not a valve stem puller... a valve core removal tool.
Why are they calling Kenny Powers Trent?
I got an old(like new condition) sportster wheel and tire kicking around that I want the rubber off of and sell the wheel. Ima try this for the hell of it, good on the road skill to know but ima pay a shop to swap my Dyna’s tires, cause I ain’t risking fucking one of them up…Shit happens 🤷🏻♂️
For some reason if I change a tire for someone it will slip right on effortlessly but if it's my tire that fucker will never go on
Story of my life
I do it this way too.. in my front yard. The reason my neighbors think im white trash. Lol
Where it like a badge of honor
You forgot to recommend the small dick a brew and looks like alot of effort...
Thanx to everyone who had part in this video
Helpful for sure
Always kooool
fuck yeah kruesi originals
My tire guy uses a rubber mallet
Just use the spoons to break the bead. By the time he connected the c clamp I would have been done
This could be a video of how not to change a tire. Little details can go a long way.
I’m tired just watching
Baller
You show a tire already mounted on the rim? How the hell does that help anyone?
Most if not all wheels will already have tires on them, you have to get it off first. If you didnt need to know how to remove it, just skip that part?
🤣Someone donate a Motion Pro Bead Breaker tire iron set to that poor boy!!!
just go to harbor freight and buy a bead breaker for $40
Go to cycle gear and give the homey cash and we’ll put anything on we get paid 1 dollar to change a tire
For those who’ve never changed a bicycle tire
Jake is a professional BMX rider he’s definitely got the BMX tires down I think that’s where he got these skills.
@@kruesioriginals yeah this shit brought me back to my bicycle tire days. Exact same technique
Nice edit 3 seconds before you got it on.
Fun clown show. So the "advice" is to swap the tire on a different rim if you can't break the bead on yours? And to remove the brake rotor? Hope you are doing well on Planet Unicorn...
You really don’t get it do you?
Sit on the rim dawg