The two little t shaped things are for making a stand out of the plastic box the cube comes in. They have a tutorial in all of their recent cubes (even the super rs3m which didn't come with that packaging.)
@@siiwok Open up the cube and adjust both tools between core and tighten the upper centre piece and lower centre piece.Both's tension will be the same.
I feel like it’s my duty to inform everyone there is an incredibly simple way to open this clear case without forcing it at all, every review I’ve seen of the YS3M and WRM v9 has the reviewer rip the case apart. You can see the faces that oppose each other have half-moon shaped tabs facing in the same direction. Using both hands, lightly squeeze the sides on each half that DO NOT have the tabs and they slide apart/together extremely easily. I really don’t know how else to describe the “technique” for it lol
I already knew this, but the thing is, when I unboxed my YS3M, I used the squeeze, and it didn’t help at all. I squeezed the right half, I just don’t think it helps. The reason it is always hard is not the way they try to open it, it’s the plastic wrap.
Everybody I have watched who has used this cube has tightened the screws to mitigate the corner twisting issue. Also by the way those blue things are for putting between the core pieces to make sure that the screws are even across all of the centers. They've had those since the original WRM and I think even before that. I don't know why moyu always includes them but they're pretty difficult to use to be honest.
@@TheDukeofCubes It's fine. They're kind of terrible to begin with. I remember I used them on my WRM 2019 and never use them again. Got my ball core version yesterday and it's immediately become my main over the tornado v3. It's a fantastic cube, but the out of the box feel is a little rough which is surprising. I set mine up with Martian, lunar, comet, stardust, galaxy and nebula (I know that's a lot of lube, but I have a setup that I really like). Then I tightened the screws by a half a turn and tightened 4 ticks on the centers. The lube slowed it down just enough so that it doesn't feel completely uncontrollable but it doesn't require a lot of force to start a turn, which is exactly how I like it. It honestly feels like the WRM 2020 mixed with a gan 13. You can feel the auto align and the UV coating does feel a bit like the original moyu plastic.the 2020's plastic always felt a bit like ceramic tiles to me and so does this.
wait this is actual souptimmy finally I get to see the other versions as moyu only sent me the ball core uv coated version For the one I have it's amazing and my main at the moment.
Giving those blue things for the ballcore is a joke. So basically, what they do (it actually works, but not for ball cores) is for you to clamp down on both sides of the core, and then screw in the center pieces. It's for aligning screw depth when your cube I stripped down to just a core. It's pretty dumb, and I don't see why u would use it, but ig...
As a asian myself, loving the new name ricetimmy *rice is life*haha that's all i have to say have a great day soup/rice timmy keep up the great vids and mosaics.
Yes the twisting issue is solved but I don’t like the feel of the cube then… I say this is a great cube for someone with very light turning so me I am on the heavier side of turning so YS3M is a better fit for me
Been playing with it more, the issue can be minimize by changing spring compression to tighter, I use 3 out of 9 and it’s still quick while having “less corner twisting issue” (still corners twist tho lol)
What size is your cube? I’ve ordered two now and they both are so tiny in my hands but every time I watch someone on TH-cam the cube looks so beefy, when I’m on Amazon neither of the ones I ordered had a variation for size, only a variation of type, I.e. standard, flagship, or pioneer. Is there something I should be searching for for a normal sized cube and not these tiny two inch cubes?
full in depth non bais review with comparasion to other good cubes.... idk why matti and tymon would focus on gan 12-13 and yet whole scene is jumping on moyu cubes.... you guys are wayyyyyyyyyy to baised. Cubicle "mouthwashes" torndaov3- best cube.... Modern meta shouting - moyu cubes... suddenly moyu is the best.... tymon comes to cubicle... Gan12-13 is the best cube.... You are liars aren't you? Name your cubes!
The two little t shaped things are for making a stand out of the plastic box the cube comes in. They have a tutorial in all of their recent cubes (even the super rs3m which didn't come with that packaging.)
The GTS2 had those things I'm pretty sure, they're old as fuck
It's also impossible to use with the ball core, lol
By the way, this is a joke. I know they’re for tension evening, but there so pointless and all of MoYu’s clear plastic stuff looks the same so yeah
These tools are for tensioning two sides evenly or equally.😊
how?
@@siiwok Open up the cube and adjust both tools between core and tighten the upper centre piece and lower centre piece.Both's tension will be the same.
Is this cube blocky
@@Immaboy364 I don't know I haven't tried it.
I feel like it’s my duty to inform everyone there is an incredibly simple way to open this clear case without forcing it at all, every review I’ve seen of the YS3M and WRM v9 has the reviewer rip the case apart. You can see the faces that oppose each other have half-moon shaped tabs facing in the same direction. Using both hands, lightly squeeze the sides on each half that DO NOT have the tabs and they slide apart/together extremely easily. I really don’t know how else to describe the “technique” for it lol
WWWWWWW info
@@RiceTimmy Glad to pass on the knowledge :)
I already knew this, but the thing is, when I unboxed my YS3M, I used the squeeze, and it didn’t help at all. I squeezed the right half, I just don’t think it helps. The reason it is always hard is not the way they try to open it, it’s the plastic wrap.
6:32 that's for even screw depth on both the sides...but no one actually uses it
Souptimmy but he tried to be more asian-friendly
Please do a complete review for this once you've played around with it for a bit! love how keen you were to open each box! 😂
Will do :)
I’m subscribed before this channel blows up, souptimmy 😂
Lol same
Same
Everybody I have watched who has used this cube has tightened the screws to mitigate the corner twisting issue. Also by the way those blue things are for putting between the core pieces to make sure that the screws are even across all of the centers. They've had those since the original WRM and I think even before that. I don't know why moyu always includes them but they're pretty difficult to use to be honest.
The problem is they don’t work in their ball core versions 😢
@@TheDukeofCubes It's fine. They're kind of terrible to begin with. I remember I used them on my WRM 2019 and never use them again.
Got my ball core version yesterday and it's immediately become my main over the tornado v3. It's a fantastic cube, but the out of the box feel is a little rough which is surprising. I set mine up with Martian, lunar, comet, stardust, galaxy and nebula (I know that's a lot of lube, but I have a setup that I really like). Then I tightened the screws by a half a turn and tightened 4 ticks on the centers. The lube slowed it down just enough so that it doesn't feel completely uncontrollable but it doesn't require a lot of force to start a turn, which is exactly how I like it.
It honestly feels like the WRM 2020 mixed with a gan 13. You can feel the auto align and the UV coating does feel a bit like the original moyu plastic.the 2020's plastic always felt a bit like ceramic tiles to me and so does this.
waiting for “Soda Timmy” to complete my meal 🥘 😅
Uh is good put the purple nut to the bc one? To stability, or ends with the auto-aligment
If souptimmy made unboxing videos like this for a living, I think we would all enjoy it. Is that just me?
wait this is actual souptimmy
finally I get to see the other versions as moyu only sent me the ball core uv coated version
For the one I have it's amazing and my main at the moment.
Timmy, How soft and smooth is it?
So the t shape thing is actually a tensioning tool
Giving those blue things for the ballcore is a joke. So basically, what they do (it actually works, but not for ball cores) is for you to clamp down on both sides of the core, and then screw in the center pieces. It's for aligning screw depth when your cube I stripped down to just a core. It's pretty dumb, and I don't see why u would use it, but ig...
Never even herd of your second channel in my life
nice cube and vid rice timmy/soup timmy earned a new subscriber🤓
Haha thank you!
As a asian myself, loving the new name ricetimmy *rice is life*haha that's all i have to say have a great day soup/rice timmy keep up the great vids and mosaics.
the 40$ one of this or tornado v3 u recomend
If you very light turning style go with the WRM
@SoupTimmy thanks! i turn more agressively so ill go for the tv3
Can the corner twisting issue be solved or reduced with the tighter screw or tighter compression settings?
Yes the twisting issue is solved but I don’t like the feel of the cube then… I say this is a great cube for someone with very light turning so me I am on the heavier side of turning so YS3M is a better fit for me
@@RiceTimmy TheCubicle made a vid and they said some lube fixed it i think
Wow I never knew you had a "secret" channel! I got this recommended to me and watched the whole thing because I'm so excited for the Weilong v9!
Hey, is the ball core wrm v9 version better than tornado v3 flagship
Of course weilong v9 feels like gan 12,13 maglev
@@ASMAAKTER-un3co why is it “of course” lol
Feels like gan doesn’t make it automatically the best cube in the world
@@wasabilai9405 Weilong v9 copied gan but it feels great like gan 12 maglev
It's better but not that much better
@@Saf1- yes
DAmn just notice your turning Tyler is so agreesive
Your turning is so much fast
Did you got it for free from moyu ?
I love you're content
I’m the 400th subscriber 😊
i can’t believe you’re Souptimmy
Ikr
YOU ONLY HAVE 128 SUBS ON THIS TIMMY IM shocked
Which is shinier the YS3M UV or WRM v9 UV?
someone gave soup timmy a can of soup timmy soup, now someone ahs to give souptimmy a bag of ricetimmy rice
Now I am all set on food :) Somebody give me a drink plss
The blue things are even tensions tools there you go
New cubes are so exciting!! Subscriber #141 :)
Man, the corner twisting might be a deal breaker for me. A lot of ZBLLs use index finger pushes, and that's just asking for a twist.
Been playing with it more, the issue can be minimize by changing spring compression to tighter, I use 3 out of 9 and it’s still quick while having “less corner twisting issue” (still corners twist tho lol)
i love rice timmy
I bought a moyu two by two rubik cubee and it didn’t allow coned twisting
I think he gave us a hint in the Soup Timmy chanel cause he said rice timmy
I bet the standard's gonna be the most popular since its kinda like the older wrms
I actually like the standard more than the Ball core right now
I'm wincing here, just waiting for the Spanish Splinter with that toothpick.
is this actually soup timmy?
Yes
Seems like it
What is the fastest 3x3 in your collection
These ones lol specifically the ball core
Wait... jperm said the maglev is the fastest
@@catholiccubing9391 the ball core has the maglev….
Before 120 subs yay
What size is your cube? I’ve ordered two now and they both are so tiny in my hands but every time I watch someone on TH-cam the cube looks so beefy, when I’m on Amazon neither of the ones I ordered had a variation for size, only a variation of type, I.e. standard, flagship, or pioneer. Is there something I should be searching for for a normal sized cube and not these tiny two inch cubes?
The YS3M is 55mm a MM smaller than the usual 56
@@RiceTimmy thank you kind sir, I appreciate the intel.
Nice review
Swap the corner of the ys3m and weilong v9 ans see if it is good
Im unable to tell if this is actually Timmy
i subbed when it was 69 subs
Omg souptimmy on crack!
Nice Bideo Unco Timmy
pls make a vid about the wrm 2021 compared to the arm v9🥰(I just subscribed)
You are soup timmy right
Standard is my main
Just tighten the damn thing up. I want to get V9 but the corner twisting is holding me back.
Are you related to soup
There a new rubik cube it like sliding a puzzle not turning
Dude litterally Pushed the first one likes he hate it 😅
Ikr😅
How you turn so fasttt 😂(fr tho)
I am 92nd subscriber
I’m subbed at 1k
WEILONG V9
SoupTimmy to RiceTimmy? Whats next?
Hi timmy
Bro you have a second channel I'm your 62th subscriber
62nd*
Oh im dumb
Gan is crying lol
Is this actually you
Who
@@RiceTimmyrice/soup :)🍚🍲
Im the 70th sub
Are you Super Timmy secret account
ball core
Is this a new channel? I’m subbing lol
161st sub
Really
ello
You only tightened 5 sides.
Why are you so lazy nowadays
full in depth non bais review with comparasion to other good cubes.... idk why matti and tymon would focus on gan 12-13 and yet whole scene is jumping on moyu cubes.... you guys are wayyyyyyyyyy to baised. Cubicle "mouthwashes" torndaov3- best cube.... Modern meta shouting - moyu cubes... suddenly moyu is the best.... tymon comes to cubicle... Gan12-13 is the best cube.... You are liars aren't you? Name your cubes!
What are you on? this was literally not bias at all