You like satisfaction!! It’s satisfying to see that many parts working like that;) share the video! I plan on making many more and will continue to make them better!
Great sawing. We have a 3rd blade on our vertical. It’s attached to the second one and is s fixed at 4 1/4 inches. But it can be moved to any measurement .. could be somthing for you to look into
@@Helmsburgsawmill it’s nice cuz that way there a little less waste if you miss edging a bit you will still get a board already edged out The arms are connected by a threaded rod so it’s adjustable. I will post a small video
That piece of oak was definitely no joke and was one unhappy participant in this story, still it yielded some nice looking boards. I hope that your collective families are healthy, happy. and doing well. Say hello to your grandpa for me.
So the top and bottom saws lean inversely in the log during the cut. The goal is to have the feed rate correct, so they line up at the same time… during the whole cut:)
It was a 30 incher! I can go 28’8” in length. And i can handle a log roughly 44” in diameter one way, and 48” the other. 44” the one way, because the distance between the log deck rails and the steal I beam is 44” inches. The carriage can handle 48” in width. However I’m not going to put a log on that’s 28 ft long and 43” around😂 The weight would surely break things haha
Make sure to subscribe if you enjoyed the video!:)
great videos
Really nice sawing, very enjoyable, thanks!
I actually find all of the sawing vids quite satisfying 😃
I've never seen 4 blades before!!👍👍😊
The best sawmill with modern technology
Amazing machine 👍🏼
I don't know why I like watching this.
You like satisfaction!! It’s satisfying to see that many parts working like that;) share the video! I plan on making many more and will continue to make them better!
Great sawing. We have a 3rd blade on our vertical. It’s attached to the second one and is s fixed at 4 1/4 inches. But it can be moved to any measurement .. could be somthing for you to look into
I’ll have to check that out!
@@Helmsburgsawmill it’s nice cuz that way there a little less waste if you miss edging a bit you will still get a board already edged out The arms are connected by a threaded rod so it’s adjustable. I will post a small video
Or if you had a 16 1/2 inch face and were cutting 2x4s. You can get 4 with on pass. I really enjoy the videos even tho I saw all day long
Once you get the shell off the log then you get into good board material. Beautiful oak boards you sawing.
That piece of oak was definitely no joke and was one unhappy participant in this story, still it yielded some nice looking boards. I hope that your collective families are healthy, happy. and doing well. Say hello to your grandpa for me.
I sure will!
nice sawing sweet woog ty
Amazing how you can cut so efficiently.
It takes a lot of calibration and time off screen🥵
👍
This is a money maker YA’LL🤪🇨🇱
Bummer on the first log. You squeezed some nice looking lumber out of the smaller ones though.
Is the saw fully automated or are cuts worked out by human
@@jcb208 it’s all going on in my head!
Damn, that's bad ass !!!
It sure is!! Thank you for your enthusiasm😂 share my videos around sir
Okay, how does the double blade mad a uniform cut. Teeth on opposite sides?
So the top and bottom saws lean inversely in the log during the cut. The goal is to have the feed rate correct, so they line up at the same time… during the whole cut:)
Great video today, really enjoyed the cutting of the big oak, if I recall, you said it was a 32" log, what is the biggest log your mill can cut?
It was a 30 incher! I can go 28’8” in length. And i can handle a log roughly 44” in diameter one way, and 48” the other. 44” the one way, because the distance between the log deck rails and the steal I beam is 44” inches. The carriage can handle 48” in width. However I’m not going to put a log on that’s 28 ft long and 43” around😂 The weight would surely break things haha
@@HelmsburgsawmillThanks
Who is the daredevil who leans over to take the shots above the belts, etc? He should be sure to keep his shirt tucked in.....
Good explanation of todays cut. You used the word "cant", what's a cant?
It’s considered a junk wood of any hardwood species, that will be later ripped down into pallet material
@@Helmsburgsawmill Thanks
Why do you cut the waste in two? Aren't you just dulling a saw for no reason?
It helps the grinder chew through the easier if I split them. That grinder was installed 20 years ago😂
I'd get the belt guards on the V-Belts, it's a safety issue.
Ok ok let’s see the finished product 🙄
Check out video 75
best watched on mute so you don't have to listen to him talk
I talk for like 2 minutes in the video
@@Helmsburgsawmill like I said