CCNA Voice - How to setup a basic Voice Over IP network in Packet Tracer
ฝัง
- เผยแพร่เมื่อ 23 มิ.ย. 2016
- CCNA Voice - How to setup a basic Voice Over IP network in Packet Tracer
Click the link below to download the the Packet Tracer file for this Lab
sites.google.com/site/kmsipne...
Thank you Moustapha!! Following your video I was able to set this up on a real router, switch, and 2 Cisco phones. That is so exciting. It worked just fine.
I'm grateful for the time, effort and accuracy you put into this.
Thanks for your comment.
This is a wonderful video. Not only do I learn to configure CME, but learn/practice with DHCP pool configs, VLAN configs, sub-interface configs, router-on-a-stick configs, and more. Very, very good practice for me. Thank you Moustapha!
You are welcome!
Thanks so much, you don't know how much this has helped me. This was an excellent entry into Packet Tracer.
Thanks for the comment.
you derserve a million subscribers ! 💝 thanks for your wonderful clear explanation 😊👍
Mousthapha thanks you nailed it and its very detailed.
Maitre c'est la premiere fois ou j'assite le cour la téléphonie à traver les vlan sisco merci pour toute les cours que vous avez publier c'est tres interesant
Merci pour le commentaire.
You cleared up a lot for me. I have been studying for about 8 months to take the CICD 210-060. I purchased a book and some tests from Ebay, but I am unable to purchase the hardware. Packet tracer helped me get my CCNA. I understand more now about the CME and how to set up the phones. I can now use this basic set up to configure more and troubleshoot. Thank you so much.
Your're welcome. Thanks for your comment.
Thank you so much Moustapha, for a great video. I love that and it was really useful. THANKS again and God bless. Mike
Glad it was helpful!
Thank you sir, the video helped in acquiring a basic knowledge on configuring the voice phones
You're welcome. I am very please to hear that.
Thank you so much, the step by step was great!!!
Glad you liked it!!
Very nice job. Thank you very much for making this video!
You're welcome i really appreciate your comment.
Thanks..Very Useful and easy explanation..
You're welcome.
Thank you for your sharing your knowledge
This is a great video. Thank you for making it...
Thanks a lot for your great video, explanation are very good and I love it. Thanks again and God Bless. Mike
Thanks for your comment.
simple and very informative .. great vedio ..... i learned alot from this ..... thank you .. and keep it up .... (y)
thank you very much.. very clear details. very useful
You're welcome.
This is a very good video! Thank you so much! This has been so very helpful for me.
You're welcome.
Merci pour votre partage d’expérience!!!
De rien on est ensemble.
tks a lot, its very easy to underestant and apply , tk you
Thank you sir. Please make more videos like this
You're welcome. I will.
this is very concise, thanks alot
You're welcome.
Thank you Sir, This helped me a lot!!!
You're welcome.
Great video man, thanks for sharing :)
Thanks.
Thank you a lot sir..u made my day
You're welcome
Moustapha Fall you know i am from india yet i pray to God you go ahead in your carrer.. I LOVE YOUR Passion.. Go ahead.. Take care in this pandemic Era..
Thanks for the feedback.
Thank you very much Moustapha.
Boss
Can we contact please i need some help on configuration
Awesome lesson!
Glad you liked it!
thanks a lot for your great effort
You're welcome.
wow nice! thanks very much indeed!
You're welcome.
Thanx a lot...Sooo helpful
You're welcome
thank you bro, you rock!
Thanks for the comment. I wish you the best.
Fixed this I changed the NTP server address to 192.168.20.11, and pointed the router to this server. Now its working fine!!
i am glad your problem was solved.
thank mister fall
thank you very much
Great video!
Thanks.
really nice
very clear THANK
You're welcome.
great video!
Thanks
god bless you
Thanks.
Thanks compatriot
You're welcome.
Thank you
Awesome ,,👍
Thanks.
Very helpful
Thanks for you comment.
interesting and knowledgeabl
Thanks for your comment.
merci !!!!
De rien on est ensemble.
nice, thanks
You're welcome
Mr. Fall >> is there a way to know which router IOS(es) have CME built-in??? I thank you for listing the necessary equipment to make this lab.
What router command can be used to list the cnf files, once they have been created? Are they in flash?
Good explanation sir, how to configure 20 IP phones along with computers under 1 switch. Do we need to configure each manually or Dynamically it will take the IPs. Please advice.
I have a question if I have cisco router do I need an IP PBX.
why am I not able to ping from NTP server to the router to the PC and vice versa?
As I mentioned a few days ago, this is a very good video. There's lot's here for me to study, for a short video. Why create the sub interfaces? Does "router on stick" have to use sub interfaces?
Check out this video
th-cam.com/video/qQDsa4EbiU4/w-d-xo.html
the video is helpful,now i have a clue on how to configure the voice phone.By chance would be able to contact you.
where can i get the documentation for this lab? i want to study it more. Thank you for the video its great.
I changed the IP address of the server to 192.168.10.8 and configured the router to point to this server. But still my clock is showing the old value. How do I fix this? Appreciate your help
DIADIEUFETEY!!!!! This amazing.... Thank you Mon Grand! One question though! I have a Cisco router and a Cisco switch. I managed to connect to them to the internet. How would I make my connection secure? Do I need private addresses and use NAT as my gateway? Merci Encore.
You can set up a zone based firewall on your router.
Click on the link below to watch the video about zone based firewall.
th-cam.com/video/Tg0UEvPSLF8/w-d-xo.html
hello, I want to configure voIP, i have cisco 2800 series, cisco ESW 520 and cisco ip phone SPA 504G, and i have internet on Sophos 115 xg with DHCP enabled, can anybody please tell me how to interconnect all this stuffs to make it work?
Hi I have a question. I am setting up a large network with 1032 users and in total there will be 213 up phones. Can you suggest how to set up this large number of Ip phones ? I’m using Cisco packet tracer. Thanks
In this case i advise you to use the CISCO UNIFIED COMMUNICATION MANAGER. Unfortunaley Packet Tracer doesn't come with the CUCM.
What is excluded address
I have a question, if I have 3 different switches, and I use another vlans (Data and voice), is vtp work for voice vlan?
Yes VTP works for voice vlan, because the Switch only knows that a Vlan X is a Voice Vlan through the interface configuration. What i mean is: The Switch(config-if)switchport voice VLAN X - command tells the switch to use VLAN X as the voice VLAN.
Send me your configuration, so i can better assist you.
@@MoustaphaFalltaif Its solved, I forgot to make encapsulation for voice vlan. Now its working... thnks
You're welcome.
THanks you, but the problem is you made lots of video in different language
Most of the videos in this channel are in french. I am thinking about making a new channel for english only. I am sorry for the inconvenience.
need to configure ephone mac add or VM Station ID. How to solve this professor?
can you pls send me the text for the configuration i would appreciate that . thank you in advance
Click the link below to download the the Packet Tracer file for this Lab
sites.google.com/site/kmsipnet/downloads/voip%20network%20PT.pkt?attredirects=0&d=1
Thank you sir, can you share presentation file is it possible for you sir
Right now i don't have it available, but i will see what i can do for you.
Thank you again, Can I download PRESENTATION ? is there any LINK for STUDENTS ? Thanks and GOD bless.
hello please help me lab
why are we not making fa0/11 -12 as trunk ?
For security reasons you don't want to make fa0/11 -12 as trunk, beceause someone can plug a switch on those ports and have access on your vlans.
thanks alot. best wishes and regards
Can you please make a detailed video regarding trunk and Access port. Or if in case video is already present can u please provide a link?
There is no any sense to set VLAN if you set switch ports as access instead of trunk
Because you don't understand the concept of voice vlan.
can you put more than one IP source address?
You cannot use more than one IP source address, however you can change it. Usually it is recommended to use ip address of a loopback.
@@MoustaphaFalltaif thank you for your reply, great video BTW 🙏🏽👍🏽
JD fane 2.3 Disik
siema, jd
jd
How would you do that if you have over 240000 users lol
In that case you need to go with the Cisco Unified Call Manager (CUCM). This video is just to explain the basics concepts of a small voice over IP network.