OH MY GOSH! I woke up Saturday morning, and my first thought was, "I wish I could somehow paint my Kitchen Aide" to go with my new countertops. Never in a million years did I think it was possible. Then, I watched your video. Well, let's just say that my mixer turned out PERFECT. It was fire engine red, and now it's a beautiful rose gold. I'm in LOVE! Thank you so much for making this video. The only thing you forgot to include was the fight you will likely have with your spouse while doing this project. HAHA. He didn't trust me to spray the primer (he's SUPER detail oriented; I'm not). Well, guess who messed up? LOL
THANK YOU SO MUCH!!! Your how to video is fantastic, I own the exact Kitchenaid mixer you have, and I painted it teal. Came out fantastic. I recommend following your instructions. I researched other videos, nothing is as comprehensive and well done as your tutorial. Thank you again!
Thanks for the informative video! I appreciate that you didn't waste my time by being long-winded as so many others were. This was also the only instructional video found where the kitchenaid was fully disassembled before painting. I love the end result!
I have the very same one. Getting ready to refinish mine, as it’s better than the new ones. Mine is made by Hobart...the new ones are made by Whirlpool. No comparison. Mine works beautifully. Plus, it was my grandma’s. Thanks for the great video that saved me from buying a new one!
Thanks for the great directions... used your tutorial to paint my 20+ year old off-white Artisan model... changed out the original off-white Kitchenaid band trim for a silver, replaced the black attachment hub cover with a chrome cover... it looks great. 💙Ordered my Montana Gold Metallic Effects paint from Home Depot for store delivery (no shipping cost) and could not be happier with my “new” Tennessee Blue mixer!
WOW!!! Love hearing that Cay. Send me a picture on Instagram if you can. Would love to see the transformation. Thanks for sharing and hope you subscribed :)
You have saved me with that 2000 grit sandpaper tip!!! I watched a separate tutorial that didn’t say anything about sandpaper and I thought I was doomed with a crusty feeling mixer! I just went over it with the sandpaper and it’s so smooth! I will also be adding a clear coat. Wondering if it will turn out glossy though, because I actually like how my “mat-look” white looks! Hhmm...?
Great to hear bailey and glad the video helped. If you want a matte finish then you can get a matte or satin clear coat. That should take care of it. Thanks for watching and hope you subscribed.
Question: Rust-oleum makes a set of "appliance paints" but only in about 5 colors. Are these in any way better, perhaps more durable than their regular paint? How has your paint job on the mixer held up?
I would disassemble it further before painting. Then you can clean the internals, relube and paint even easier. This video inspired me to do so, but others showed me how to disassemble further.
Hello i just ordered my new kitchenaid mixer today in pink color and i always wanted to buy this copper color but the price is double 😞 i have more questions but i don't know if you're still active, i hope you still. Please reply to me. Pleasee
Good job,, but... I've restored a few and I remove the plug that holds the brushes in place and replace it with aftermarket chrome plugs to match the side trim and any other chrome looking parts.
Hi this video is great and exactly what I needed ! I’m wanting to fully replicate what you’ve done here , my kitchen aid is white and the finish is in good condition. An I just sand down and apply the copper spray or should I still prime it . Thank s
Great to hear and thanks for watching. You probably can get away without the primer coat since its white already but I would still do a quick primer coat just so you know for sure you have a great surface for the copper paint color to attach to. Thanks for watching and hope you subscribed.
cool. If you have an older Kitchenaid mixer and are planning to do this, good opportunity to regrease it too then it will look and operate like new. Mr. Mixer has some tutorials on that.
You sir are a friggin magician. if only you were closer I'd pay you to paint mine. I bought a large Professional Kitchenaid mixer version in some kind of limited edition silver gunmetal color, which is okay but after so many yrs I've regretted the color. I hope you do this for a living, many MANY women would love to have this done.
Hiya! I appreciate your thoroughness! My mom gave me hers from the 70s and the base has rusted some on the bottom some. Any suggestions besides taking it to an autobody shop?
Great to hear you have an oldy but goody. The saying "they don't make them like they used to" truly applies here haha. You can take some sandpaper to it if the rust isn't too bad. Or if you have a grinder, it will make fast work of it if you have the right bringing wheel. Hope that helps. Thanks for watching.
Haha! It would make these project go faster if it was half assed but if you want the job done right you have to take the time to do it correctly. Thanks for watching :)
I have a white kitchen aid stand mixer but I'd like to paint it a seafoam/mint colour. Would I still need to use the white primer or could I just sand then paint?
I would say if the base color is white already then you don't have to worry about a priming coat as long as you sand the surface first. Thanks for watching Lisa.
hey, thanks for posting this vid!!! Quick question about stippling.... Can I use 2k grit to smooth out other spray paint projects (if I spray paint plastics?) Not thin plastic - like a plastic tools/nuts & bolts organizer w 16 drawers > sold by lowes & home depot??? ♥️👍👍👍 Thx!!!
I actually love the original color…mine is plain white. Now I’m thinking of getting all the supplies and hiring someone to paint it for me! How does the paint hold up long term? What brand paints will hold up longest/be most durable?
would you reccomend using the flat white paint if the mixer is already white? and do you have any experience with the montana gold silver chrome spray paint?
Thanks for watching Luis. With any paint project I would suggest spraying a primer layer down first. Yes I have used the gold and silver quite a bit. I personally love their silver spray paint. Makes everything look amazing. Thats what I used in the silver background in my intros and conclusions.
Over hauled our mixer today! Did all steps but still ended up marring it when putting back together! 6 coats of enamel thinking the super thick finish would help but it really didn’t. May end up doing all over again. No one else will see the imperfections but I think over time we are going to scratch it up and will have to redo it again. Looks great for now but only time will tell.
Needs to dry several hours between coats and wait several days before putting it back together. Definitely not a 1 day project, more like 1 week. But being patient is worth it.
My x wife took the kitchen in mixture that I bought for us, (left me the attachments). I just bought a used one I want to change it from silver to a different colour. Exactly the video I need to see.
Whats neat about this frog green tape is its flexible and it can curve or flex to what your masking i find other type of masking tape to be hard to use and they don't stick as good as this tape. Anyways thought id give my review on it maybe someone else will like it.
Thanks, looks great and great technique ideas, but I loved the YELLOW! Also you have one built by the Hobart company these are superior to the ones manufactured later on.
Hey!! I just bought one of these (looks exactly like this) for 10$ at goodwill to refinish for my girlfriend's birthday. I was wondering, I'm in college and don't have a garage to spray paint in, where would you recommend spaying it? I could do it in the bed of my truck, but then I wouldn't be able to hang it anywhere, think that'd make a difference? Also, do you know how hard it'd be to upgrade to a power cord with a ground? Thanks for the video, very helpful i'll definitely be rewatching at least ten times to make sure I don't screw up.
Great to hear Caleb and I would suggest you spray it outside. If you have a truck then you could put some type of bar on both side of the truck bed and use a hanger like I did to hang the mixer in the truck. Then spray it from there like i did. Thanks for watching and all the support. As for you other question do you mean an electrical outlet that is only two prongs but you need a three prong outlet?
@@BYOTools Yes! The cord on it right now is very fragile and i wouldn't trust it not to break, so I was gonna replace it with a three-prong but I wasn't sure how to ground it safely.
They don't hold up to heavy use because it's not powder coat. Luckily spray paint is cheap and it can be touched up endlessly. It's quick and simple. The head doesn't even have to be removed from the base.
You did a thoroughly excellent job dude, well done! What would you charge to do something like that, I’m not asking you to I’m just wondering the value of the work because I might do a few of them for some friends.
Please help. I did the repainting job same as you, sanded and used primer then painted. As soon as I put it back together and tilted the tilt head the paint started scratching at the points where the two main parts meet. Also noticing lots of peeling from moving it around etc . Seems like the paint isn’t sticking. I used a clear coat as well but didn’t seem to prevent these scratches
An hour between primer and paint, 5 min between paint coats, and a couple hours between paint and clear coat. Thanks for watching Sammy and hope you enjoyed the video.
What is the copper paint can called ? I have a copper kitchen and would love to update mine. I use mine daily and am worried that the paint won’t last or worse will bleed in to the food
Can we have an update please? I I am thinking I want to paint my KitchenAid mixer, but I want to know it will withstand the paint and last before proceeding! :)
Still looks AMAZING with no paint chipping. In all honesty I don't use it very much so it doesn't get a lot of ware and tear but none the less it still looks great. Thanks for watching.
Corry but don’t have that much experience with mixers. I have seen videos dedicated to disassembling them and reassembled so I would check one of those out. Thanks for watching and hope you enjoyed the video.
There are vids here on youtube on how to change the grease. The grease breaks down with age/use, it actually liquifies and turns dark. The replacement grease is white and is food grade.
this is exactly what i'm going to do with mine, i have a barbie pink kitchenaid mixer and it just does not fit into my black/copper/wood themed kitchen. but one question, do you need to sand between the top coats or just after the paint ?
Thanks for watching. I did not sand between top coats. If you put a few layers on and its not as smooth as you would like give it a light sanding and then finish it off with one last coat of clear just like I did with the paint. Hope that helps.
Oh Gundny11!! If you're into vintage style black/copper/wood.... I have found many items that are pink (granted, most are pastel pink) with copper lids, accents, etc... and black silhouettes, patterns, etc., elegant looking items from canisters to utensil holders that may tie in your pink mixer. I have a vintage canister set from my mother with copper lids that accent my very primitive, wrought iron, copper and stone kitchen well. Good luck!!
All together it took about two to three hours to do but it was done within a two day span since you have to wait for the paint to dry. Thanks for watching.
Followed all of these steps exactly and it’s looking beautiful (got the spray paint on) and then realized that i didn’t get spray paint under the speed knob and when I move it side to side it scrapes the paint off 😩 any recommendations for this?
Don't you hate that?!! haha!! Randi I would just lightly sand that area that needs paint. Then spray it with spray paint and clear coat. Just make sure you spray very lightly. Hope that helps and thanks for watching. Hope you subscribed :)
Hi Alex. I was using Rust-Oleum Flat White Enamel and Rust-Oleum Crystal Clear Enamel. Both work great for this type of application. Thanks for watching.
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
OH MY GOSH! I woke up Saturday morning, and my first thought was, "I wish I could somehow paint my Kitchen Aide" to go with my new countertops. Never in a million years did I think it was possible. Then, I watched your video. Well, let's just say that my mixer turned out PERFECT. It was fire engine red, and now it's a beautiful rose gold. I'm in LOVE! Thank you so much for making this video. The only thing you forgot to include was the fight you will likely have with your spouse while doing this project. HAHA. He didn't trust me to spray the primer (he's SUPER detail oriented; I'm not). Well, guess who messed up? LOL
love to hear it!! mine is red also and I was thinking of changing it to rose gold! which rose gold did you you use?
Nice! A few tips (if I may): the planetary trim ring will tap-off, the chrome insert in the nose will pop-out, mask the brush caps.
What does this mean? Lol I'm going to want to take on this project myself but I have no idea what you're referring to 😭
@@Renata910the metal ring around the part that spins. I’m in the process of sanding mine down now and tapped it off to tape up and paint.
@@a19d86m Thank you!
THANK YOU SO MUCH!!! Your how to video is fantastic, I own the exact Kitchenaid mixer you have, and I painted it teal. Came out fantastic. I recommend following your instructions. I researched other videos, nothing is as comprehensive and well done as your tutorial. Thank you again!
Love hearing that and thanks so much for watching. So glad yours turned out great. Greatly appreciate the support and hope you subscribed :)
Thanks, this gives me hope!!
Thanks for the informative video! I appreciate that you didn't waste my time by being long-winded as so many others were. This was also the only instructional video found where the kitchenaid was fully disassembled before painting. I love the end result!
I have the very same one. Getting ready to refinish mine, as it’s better than the new ones. Mine is made by Hobart...the new ones are made by Whirlpool. No comparison. Mine works beautifully. Plus, it was my grandma’s. Thanks for the great video that saved me from buying a new one!
Bro I wish you did this for a living I’d gladly pay for your detailed service on this 👍🏽👍🏽
Thanks for the great directions... used your tutorial to paint my 20+ year old off-white Artisan model... changed out the original off-white Kitchenaid band trim for a silver, replaced the black attachment hub cover with a chrome cover... it looks great. 💙Ordered my Montana Gold Metallic Effects paint from Home Depot for store delivery (no shipping cost) and could not be happier with my “new” Tennessee Blue mixer!
WOW!!! Love hearing that Cay. Send me a picture on Instagram if you can. Would love to see the transformation. Thanks for sharing and hope you subscribed :)
I messaged the pictures to your Instagram account. You can share them if you wish to.
You have saved me with that 2000 grit sandpaper tip!!! I watched a separate tutorial that didn’t say anything about sandpaper and I thought I was doomed with a crusty feeling mixer! I just went over it with the sandpaper and it’s so smooth! I will also be adding a clear coat. Wondering if it will turn out glossy though, because I actually like how my “mat-look” white looks! Hhmm...?
Great to hear bailey and glad the video helped. If you want a matte finish then you can get a matte or satin clear coat. That should take care of it. Thanks for watching and hope you subscribed.
Question: Rust-oleum makes a set of "appliance paints" but only in about 5 colors. Are these in any way better, perhaps more durable than their regular paint? How has your paint job on the mixer held up?
I groaned when I heard you say disassemble but you're right, it needs to be done right if you want a good end product!
Refinishing mine today!! So excited I picked an aged copper versus new copper
Great to hear carrianne! Tag me if you post a picture. Would love to see how it turns out. Thanks for watching.
I would disassemble it further before painting. Then you can clean the internals, relube and paint even easier.
This video inspired me to do so, but others showed me how to disassemble further.
Here I am crying on the inside because I love the 70’s color. 😂
Here I am crying because the kitchen aid is so freaking EXPENSIVE 😂😂
Honestly, I thought the "70s color" was better.
I think both colours look good 🤣
The before was better 😢❤
Aren't those mixers powder coated?
Wow! It looks GORGEOUS!
Great to hear. Thanks for watching.
Hello i just ordered my new kitchenaid mixer today in pink color and i always wanted to buy this copper color but the price is double 😞 i have more questions but i don't know if you're still active, i hope you still. Please reply to me. Pleasee
Good job,, but...
I've restored a few and I remove the plug that holds the brushes in place and replace it with aftermarket chrome plugs to match the side trim and any other chrome looking parts.
BTW that round metal ring comes off Very easily.
I had a little difficulty
h h it depends
@@emilybaker4187 ared zwzwWW was w was W
Thanks for this. I got a kitchenaide from a friend that I've been wanting to re-finish. I just wasn't sure if I could. Now I know I can!
Hi this video is great and exactly what I needed ! I’m wanting to fully replicate what you’ve done here , my kitchen aid is white and the finish is in good condition. An I just sand down and apply the copper spray or should I still prime it . Thank s
Great to hear and thanks for watching. You probably can get away without the primer coat since its white already but I would still do a quick primer coat just so you know for sure you have a great surface for the copper paint color to attach to. Thanks for watching and hope you subscribed.
interesting video was there a reason for keeping the mixing head together, the trim ring just pops off very easily. Nice paint work!
I have this mixer in this exact color and your looks spot on, just like the one from the manufacturer. Good job:
Great to hear Vee. What color are you going to change yours to? Hope you subscribed.
THAT IS VERY COOL!!!
Great to hear John. Thanks so much for watching and hope you subscribed.
cool. If you have an older Kitchenaid mixer and are planning to do this, good opportunity to regrease it too then it will look and operate like new. Mr. Mixer has some tutorials on that.
If I want to leave it white, is it ok to apply just the white protective enamel followed by the clear gloss??
You sir are a friggin magician. if only you were closer I'd pay you to paint mine. I bought a large Professional Kitchenaid mixer version in some kind of limited edition silver gunmetal color, which is okay but after so many yrs I've regretted the color. I hope you do this for a living, many MANY women would love to have this done.
Hiya! I appreciate your thoroughness! My mom gave me hers from the 70s and the base has rusted some on the bottom some. Any suggestions besides taking it to an autobody shop?
Great to hear you have an oldy but goody. The saying "they don't make them like they used to" truly applies here haha. You can take some sandpaper to it if the rust isn't too bad. Or if you have a grinder, it will make fast work of it if you have the right bringing wheel. Hope that helps. Thanks for watching.
I am glad I watched your video first. Yours is thorough. The others all look half-assed compared to yours! Thank you for sharing.
do you ever do anything half assed? good job. impressive job
Haha! It would make these project go faster if it was half assed but if you want the job done right you have to take the time to do it correctly. Thanks for watching :)
This is perfect. I want mine to end up copper. Nothing says "you got this" like someone doing the exact thing you want.
I love this
Thanks for watching.
Am I the only one who kinda loves the funky green?
How many primer, paint, and sealant cans were needed to complete the job? I’m afraid to order only one of each. TIA!
Wow! Thankyou!
No problem Lana. Thanks for watching.
I bought a copper Kitchenaid on QVC... a great price and the color I wanted!
Very informative. Can’t wait to try this.
I have a white kitchen aid stand mixer but I'd like to paint it a seafoam/mint colour. Would I still need to use the white primer or could I just sand then paint?
I would say if the base color is white already then you don't have to worry about a priming coat as long as you sand the surface first. Thanks for watching Lisa.
hey, thanks for posting this vid!!!
Quick question about stippling....
Can I use 2k grit to smooth out other spray paint projects (if I spray paint plastics?) Not thin plastic - like a plastic tools/nuts & bolts organizer w 16 drawers > sold by lowes & home depot??? ♥️👍👍👍 Thx!!!
Omg I needed this so bad ! You're the best !
Thanks Perla.
Excellent video.
How did the Montana paint hold up for you? Any reason you chose that over something like Rust Oleum?
Ugh. I wish I could just send mine to you to do. Hahaha. Good job.
Haha Thanks for watching Krissy.
You can probably send it to someone a pro painter for cheap
Yes I was thinking the same 🥴
I just picked up one at a yard sale for 30 bucks I’m going to paint it candy apple red thanks for your help
I actually love the original color…mine is plain white. Now I’m thinking of getting all the supplies and hiring someone to paint it for me! How does the paint hold up long term? What brand paints will hold up longest/be most durable?
Yeah baby! 👍🏾🤩
Thats right Carontie haha! Thanks so much for watching and hope you subscribed.
Woww, its look great, love this video😍👍🏻⭐️⭐️⭐️⭐️⭐️
Great to hear AnnGhazali and thanks for watching. Hope you subscribed.
BYOT 👍💫
would you reccomend using the flat white paint if the mixer is already white? and do you have any experience with the montana gold silver chrome spray paint?
Thanks for watching Luis. With any paint project I would suggest spraying a primer layer down first. Yes I have used the gold and silver quite a bit. I personally love their silver spray paint. Makes everything look amazing. Thats what I used in the silver background in my intros and conclusions.
Over hauled our mixer today! Did all steps but still ended up marring it when putting back together! 6 coats of enamel thinking the super thick finish would help but it really didn’t. May end up doing all over again. No one else will see the imperfections but I think over time we are going to scratch it up and will have to redo it again. Looks great for now but only time will tell.
Needs to dry several hours between coats and wait several days before putting it back together. Definitely not a 1 day project, more like 1 week. But being patient is worth it.
My x wife took the kitchen in mixture that I bought for us, (left me the attachments). I just bought a used one I want to change it from silver to a different colour. Exactly the video I need to see.
Whats neat about this frog green tape is its flexible and it can curve or flex to what your masking i find other type of masking tape to be hard to use and they don't stick as good as this tape. Anyways thought id give my review on it maybe someone else will like it.
Thanks, looks great and great technique ideas, but I loved the YELLOW! Also you have one built by the Hobart company these are superior to the ones manufactured later on.
Haha. My mom said the same exact thing about the yellow haha. And yes I know about the quality. This thing is built like a tank. Thanks for watching.
Hey!! I just bought one of these (looks exactly like this) for 10$ at goodwill to refinish for my girlfriend's birthday. I was wondering, I'm in college and don't have a garage to spray paint in, where would you recommend spaying it? I could do it in the bed of my truck, but then I wouldn't be able to hang it anywhere, think that'd make a difference?
Also, do you know how hard it'd be to upgrade to a power cord with a ground? Thanks for the video, very helpful i'll definitely be rewatching at least ten times to make sure I don't screw up.
Great to hear Caleb and I would suggest you spray it outside. If you have a truck then you could put some type of bar on both side of the truck bed and use a hanger like I did to hang the mixer in the truck. Then spray it from there like i did. Thanks for watching and all the support.
As for you other question do you mean an electrical outlet that is only two prongs but you need a three prong outlet?
@@BYOTools Yes! The cord on it right now is very fragile and i wouldn't trust it not to break, so I was gonna replace it with a three-prong but I wasn't sure how to ground it safely.
that beauty ring just comes straight off though
Tap the metal ring with a screwdriver blade in several places lightly and you save a lot of work and get a much better job. It comes off easily.
Thanks for the suggestion Donald. Greatly appreciated and thanks for the support.
I want to see how it held up after a year and a half of heavy use.
Misty Heyden same!!!
They don't hold up to heavy use because it's not powder coat. Luckily spray paint is cheap and it can be touched up endlessly. It's quick and simple. The head doesn't even have to be removed from the base.
Great video! I love your attention to detail. Thanks!
Great video! Just what I was looking for
Hi, great job!, do you know if it is possible to spray paint their drink blender as well?
You did a thoroughly excellent job dude, well done! What would you charge to do something like that, I’m not asking you to I’m just wondering the value of the work because I might do a few of them for some friends.
This is awesome Byot !
Please help. I did the repainting job same as you, sanded and used primer then painted. As soon as I put it back together and tilted the tilt head the paint started scratching at the points where the two main parts meet. Also noticing lots of peeling from moving it around etc . Seems like the paint isn’t sticking. I used a clear coat as well but didn’t seem to prevent these scratches
The Alien from Alien is called a Xenomorph. Nice video btw!
Amazing job!!! You’ve definite inspired some ideas for me!
Great to hear Samantha. Thanks for watching and hope you subscribed.
Any updates? How did it hold up?
Omg !!!
Awesome!!!!
Did you use just one can of primer and color each?
How long did you allow for drying between and before sandpaper
An hour between primer and paint, 5 min between paint coats, and a couple hours between paint and clear coat. Thanks for watching Sammy and hope you enjoyed the video.
What is the copper paint can called ? I have a copper kitchen and would love to update mine. I use mine daily and am worried that the paint won’t last or worse will bleed in to the food
If I want another color other than gold, which spray paint do you guys recommend? great video!
I will always recommend Montana gold spray paint. Sooooo many colors to choose from and they dry very quickly. Thanks for watching Karla.
@@BYOTools It has poor review on Home Depot website.
Can you use a paint primer product or do you need them separately
When taping the sides... did you put tape the inside of the speed lever?
If your talking about the inside slot that the speed lever goes into then no I didn't. Thanks for watching Elisabet and hope you enjoyed the video.
This is the exact model I am going to redo. Found it in my grandmothers basement which 2 attachments but no bowl!
Amazing DIY video!
Hiya! I want to custom paint a drip coffee maker! Do you have any tips? Obviously it will be 'sectioned' painted I don't want to do the whole thing!
Never done that before haha. Would you be painting the glass or just the plastic?
@@BYOTools just plastic!
@@BYOTools my biggest concern is the amount of heat and steam a coffee maker goes through and it could ruin the paint job
@@lindsaygilliss9644 I wouldn't worry too much about the heat. just make sure you abrade the surface very well and use a good primer.
Can you do a Sunbeam Mixmaster 10?
Can we have an update please? I I am thinking I want to paint my KitchenAid mixer, but I want to know it will withstand the paint and last before proceeding! :)
Still looks AMAZING with no paint chipping. In all honesty I don't use it very much so it doesn't get a lot of ware and tear but none the less it still looks great. Thanks for watching.
Any advice on what do if it keeps leaking oil from the silver ring ?
Corry but don’t have that much experience with mixers. I have seen videos dedicated to disassembling them and reassembled so I would check one of those out. Thanks for watching and hope you enjoyed the video.
There are vids here on youtube on how to change the grease. The grease breaks down with age/use, it actually liquifies and turns dark. The replacement grease is white and is food grade.
this is exactly what i'm going to do with mine, i have a barbie pink kitchenaid mixer and it just does not fit into my black/copper/wood themed kitchen.
but one question, do you need to sand between the top coats or just after the paint ?
Thanks for watching. I did not sand between top coats. If you put a few layers on and its not as smooth as you would like give it a light sanding and then finish it off with one last coat of clear just like I did with the paint. Hope that helps.
Oh Gundny11!! If you're into vintage style black/copper/wood.... I have found many items that are pink (granted, most are pastel pink) with copper lids, accents, etc... and black silhouettes, patterns, etc., elegant looking items from canisters to utensil holders that may tie in your pink mixer. I have a vintage canister set from my mother with copper lids that accent my very primitive, wrought iron, copper and stone kitchen well. Good luck!!
What clear coat did you use
Hi.my question its if no need waxing the wall at the end?
What paint brand did you use?
Dope !!!
I want the copper kitchenaid but its like 7 times more expensive than the white one so i might do this!!!!! Amazing!!!
Exactly!!!! Do it and let me know how it goes. Thanks for watching.
How long did this take you? I'm not a pro, so I'm assuming this would take me three times as long as it did for you. Thanks in advance.
All together it took about two to three hours to do but it was done within a two day span since you have to wait for the paint to dry. Thanks for watching.
How does this hold up after a year + of use?
Amazing!!!!!!!
Thanks for watching Rachel.
BYOT any chance you can do a tutorial on how to make a toddler Bunk bed out of wood pallets
Hi Rachel. I'm sure i can in the future but it might be a little while. Need to build the family first haha! Thanks for watching.
Wow! Awesome
I’m interested in having a rainbow colored kitchenaid. Possible ? 🌈
Followed all of these steps exactly and it’s looking beautiful (got the spray paint on) and then realized that i didn’t get spray paint under the speed knob and when I move it side to side it scrapes the paint off 😩 any recommendations for this?
Don't you hate that?!! haha!! Randi I would just lightly sand that area that needs paint. Then spray it with spray paint and clear coat. Just make sure you spray very lightly. Hope that helps and thanks for watching. Hope you subscribed :)
How long did it take to dry??
New Sub here!!! Love your attention to detail on this project
Thanks for watching and the support Damon.
Which can do you use for primer and which for clear coat?
Hi Alex. I was using Rust-Oleum Flat White Enamel and Rust-Oleum Crystal Clear Enamel. Both work great for this type of application. Thanks for watching.
that hurt to say good-bye to the yellow, but a well-done video. this could apply to almost any metal item. thank you.
Yes it does apply to many different metal projects. Thanks for watching Karen.
where can I buy the copper paint, like what store?
I have a scratched KitchenAid. It's white. This is a thought.
And here I am wanting to achieve that yellow color 😆
Gotta love the 70's right? haha! Thanks for watching Lindsay.
I read that the round metal ring comes off but I can't see how. Help?
👏🏼👏🏼
The drip ring is removable
That mixer was new not from the 70’s. The color is Kyoto Glow
greaaat good job i will try )))))
I painted my mixer and now it won't work. Can you advise what I should check? Thank you!
hello! I am freaked out!
Ouch! Thats no good. Will it turn on and it sounds like the motor is getting power to it? Or is it just dead?