All I can say is, WOW!!! This video is nearly 60 minutes long and I just sat here and watched all 60 minutes. That was fun to watch and it really turned into a gorgeous machine! Very very cool!!!
Fantastic!!!..What an awesome video!!!.Really beautiful mud mower!!!.I miss Florida so badly..I am uo here in cold Pennsylvania..I remember swimming across the Manatee river to go mushroom hunting in these huge fields..We used to walk down the gator trails where the gators used to drag the cows down to the water ..My friend Leigh pulled a whole ribcage out of the water one time..I spent so much time going to school down there..-John
I would like to ride in the Pennsylvania snow, but I am sure I would freeze in a few minutes... Sounds like you need to pack up and head this way. Thanks for watching!!
Chud I love the build The Mud Bugs on the rear are perfect After the storm you must have serious sloppy mud in your back yard😮 Please bury the Mud. Bugs and make em spin !
This Craftsman is definitely one of the coolest mud mowers i've seen! I really like the awesome sound from the exaust that you made for it too. 👍 I really like your previous build too with the lifted John Deere! 😊
we're all learning a lot from these videos. when im struggling with a narrow tire/wide rim stuff a car inner tube in just to inflate it walk away half hour then break 1 bead remove tube and air up again. ever have a mandela effect happen? 2007 i bought a bobcat skidloader worked great for years & years then last year developed a bad engine oil leak somewhere just found it yesterday it was hidden lower inside machined surface corner of aluminum oil filter housing block on back side of engine block took it off and found a big burr like someone smashed a hammer to it no way it could seal with that much gap thing is NO ONE has been in there since 2007
Hey Mr Chud, I'm wondering if you could educate a beginner. Can you explain how to tell the difference between a hydro mower and a manual mower? Is there anything wrong with pulley swapping a hydro mower vs a manual mower?
Hydro usually have go pedals on the right side where manuals do not. Sometimes it is a shifter to n the fender that has no gear numbers... If you see numbers, it is probably a manual. Good luck and thanks for watching!!
Hey chud I've went out and bought me one. My question is the front roller 4 lug hubs, what part number is it? And the bolt pattern is it the same as honda?
Part number is KD8LAH-3/4 for the hubs. I am not sure on the Honda patter, google that and see if they are 4X4 inch. Good luck and thanks for watching. Be sure to tell them Chud327 sent you...
@chud327 thanks. I'll do both. My neighbor just gave it to me free. It starts up runs fine, deck is just junk. So, u inspired me on what I'm gonna do with it. 😆
Most are probably 6 speeds, some are 5 speeds, at least one is a 3 speed. I also have a couple that are 3 speeds, with hi and low range. thanks for watching.
sir, for me. just me. your font tires turn more then a drift car. i would put a stop on them a little sooner. there set up to turn real tight as a lawn tractor. but your that. i would put a stop in there. just me.
So true, great point, used to have one and sold it. This one is most built mostly for deep sand, does pretty much as good as a 2WD atv. My biggest issue is those cost thousands, I bet I have less than $100 in this one... dollar to dollar, this one is so much better. thanks for the advice and for watching. Also, you probably know as good as I do, atv video just don't get as good in the views department.
Why is it more fun with a ATV than this mud mower? It's more fun riding a modified lawn tractor that you have built yourself than riding a ATV that is the same type and model as everyone else have.
Got the same exact model craftsman in my backyard. Got it to go 45 mph, now I’m gonna lower it and make it a drift mower. Love the build. 👍
Will it be a series on TH-cam??😊
@@someguy4476 I wish… maybe I should do one. 👀
Very cool, be safe at that speed. Thanks for watching!!
All I can say is, WOW!!! This video is nearly 60 minutes long and I just sat here and watched all 60 minutes. That was fun to watch and it really turned into a gorgeous machine! Very very cool!!!
Awesome comment!! I love hearing that. You should go back and watch it once a year as a tradition... Thanks so much for watching!!
Fantastic!!!..What an awesome video!!!.Really beautiful mud mower!!!.I miss Florida so badly..I am uo here in cold Pennsylvania..I remember swimming across the Manatee river to go mushroom hunting in these huge fields..We used to walk down the gator trails where the gators used to drag the cows down to the water ..My friend Leigh pulled a whole ribcage out of the water one time..I spent so much time going to school down there..-John
I would like to ride in the Pennsylvania snow, but I am sure I would freeze in a few minutes... Sounds like you need to pack up and head this way. Thanks for watching!!
Wow a 2006 craftsman ys4500 was what started me in the mud mowers. Miss that thing.
Very cool, I know I am enjoying mine... thanks for watching.
I love the longer build vids! keep it up!
So glad you like it and will do!!! Thanks for watching.
@@chud327 no problem is there anyway i can send you a bigger packadge?
@@chud327 where did you get the rims from
@@TTK-BM brand new, recycle place in town…
I definitely have to get some of those hubs, awesome build
Gopowersports.com, if you mention my name there might be a discount, or that may have expired. I really don't remember. Thanks for watching!!
Definitely one of the best builds you have, I can tell you’re going to ride it a lot
Thanks so much and I sure hope so. thanks for watching.
@@chud327 no problem, be safe on it!
Chud I love the build
The Mud Bugs on the rear are perfect
After the storm you must have serious sloppy mud in your back yard😮
Please bury the Mud. Bugs and make em spin !
Will see what I can do. Thanks for watching!!
This Craftsman is definitely one of the coolest mud mowers i've seen! I really like the awesome sound from the exaust that you made for it too. 👍 I really like your previous build too with the lifted John Deere! 😊
Thanks so much and me too. I am trying to decide which I like best. Maybe just call it a tie. thanks for watching.
@@chud327 Yes i would call it a tie because in my opinion both are great builds that it seems that you put many hours into while building them.
Thank u. Chud. For. The. Shoutout. Keep safe. From the Bad. Hurricane. Jeff walz. 😊
You are welcome and will do, worst part is supposed to be during the dark, I hope to sleep through it. Thanks for watching!!
Wow you build a real good lawn mower four-wheeler and I look like a lot of fun thank you for the video
It has been a blast so far and thanks so much for watching.
Thanks Chud For the shout out!
Anytime and thanks for watching.
dang the creativity is awesome probably your cleanest build yet keep up the good work
Thanks so much!! I think so too and thanks so much for watching!!
Love those wheels!
Thanks so much, me too, thanks for watching.
Love the vids love to see the next build maybe a rat rod mower... keep up the good work
Thanks so much, I hope to pick up a new mower project Wednesday !! Thanks for watching!!
I have always wanted to do something like that. I just don't have the time like I want. Maybe soon. Thanks for sharing.
No problem, maybe start small. This one and the john Deere took a lot of time to complete ... Or do a little at a time. Thanks for watching!!
Nice machine 👏 👌 💪
Thanks so much and thanks for watching!!
locker is amazing!
I makes a major difference in doing these and sand, need to go for deep mud next. Thanks for watching!!
We've all been patiently waiting buddy
I am so glad it is done and drivable. thanks for waiting and for watching.
@@chud327 buddy you've inspired me to build a mud mower keep up the good work
I have always wanted one of those vtwins but i cant find any here in Sweden. Awesome build i love it keep up the good work
I love the Vtwins, too bad there are not many in your area. thanks for watching.
that things neeeds to go in some crazy mud!!
IKR, I started to go to the swamp in search of some today, but found other things to do. Hopefully soon and thanks for watching.
@@chud327 we need to take it and my gt6000 in the swamp!
@@Lonniell95 ready when you are!!
Clifford should be the name!
Cool mower. Chud from Jeff walz 😊
Very cool, you reflectors came in very handy!! thanks again and thanks for watching!!
You should do a older Garden tractor amd make a crawler out of it lol
I have a couple older ones, maybe some day. thanks for watching.
mud bugs plus locker ...... oh my !!!!!!
IKR, probably my best mud mower ever... thanks for watching.
very nice work. Have you ever made a 4x4 mud mower ? I think it would be cool to have the front axle engage using the deck blade engagement lever.
I have not yet, but is one my todolist... thanks so much and thanks for watching.
Very informative great video
Glad it was helpful! And thanks so much for watching!!
Nice video I like the tractor. I’m working on an old cub cadet 108. Needs a carb.
Sounds good and good luck with it. thanks for watching.
"Not good, red craftsman is now squatted" haha
Funny and thanks for watching!!
we're all learning a lot from these videos. when im struggling with a narrow tire/wide rim stuff a car inner tube in just to inflate it walk away half hour then break 1 bead remove tube and air up again. ever have a mandela effect happen? 2007 i bought a bobcat skidloader worked great for years & years then last year developed a bad engine oil leak somewhere just found it yesterday it was hidden lower inside machined surface corner of aluminum oil filter housing block on back side of engine block took it off and found a big burr like someone smashed a hammer to it no way it could seal with that much gap thing is NO ONE has been in there since 2007
Good tip and weird on you leak... thanks so much for watching.
Always remember to put the transmission mounts back on because i bent my frame because of it!
yes, I don't want to bend or break anything. thanks for watching.
@@chud327 Yep i had to make a new frame because of it
@@smenginemech dang
You'd be a good auctioneer.
Thanks so much, just trying to keep the videos from being 2 hours or more... I talk faster when I am excited too. thanks for watching.
Cool ride ❤it
Thanks so much and thanks for watching.
Hey Mr Chud, I'm wondering if you could educate a beginner. Can you explain how to tell the difference between a hydro mower and a manual mower? Is there anything wrong with pulley swapping a hydro mower vs a manual mower?
Hydro usually have go pedals on the right side where manuals do not. Sometimes it is a shifter to n the fender that has no gear numbers... If you see numbers, it is probably a manual. Good luck and thanks for watching!!
👍👍
Thanks so much and thanks for watching.
where did you get the hubs for the rear wheels
Gopowersports.com and thanks for watching!!
You look nothing like I thought you sounded until I saw your face haha.
@@4X4ish funny and thanks for watching!!
Where did you get the hubs and what size are they
Wheels are 10's I think 7 inches wide with 4X4 lug pattern. Hubs came from gopowersports.com. thanks for watching!!
How do you push your self to build all of these mowers
It is partially for the viewers and partial for me. They are cheap and easy to do and fun to ride. Thanks for watching!!
@@chud327 me and my papaw are building a mud mower and I don't have the bogit to get mud tires so I am saving my money
@@chud327 how are you and your family doing after the hurricane
Hey chud I've went out and bought me one. My question is the front roller 4 lug hubs, what part number is it? And the bolt pattern is it the same as honda?
Part number is KD8LAH-3/4 for the hubs. I am not sure on the Honda patter, google that and see if they are 4X4 inch. Good luck and thanks for watching. Be sure to tell them Chud327 sent you...
I have a 2006 craftsman lt1000 with 20hp briggs. So, I just change the drive pully sizes to make it faster?
You can do smaller in the back, bigger in the front, or both... All should make it faster. Thanks for watching!!
@chud327 thanks. I'll do both. My neighbor just gave it to me free. It starts up runs fine, deck is just junk. So, u inspired me on what I'm gonna do with it. 😆
Defently sexy red
Thanks for the suggestion and looks like it is going to be Clifford... Update coming soon, thanks for watching!!
hey i have a question what size lug pattern are those go power sports hubs i’m looking for some for my mower
4 by 4 inch, thanks for watching!!
Man I want this what will you take for it??
Don't really want to sell it yet, but feel free to make an offer... thanks so much for watching.
i also have 17.5 hp poulan xt manual 20 mph with 4in in the back and a 3in in the front
Very nice, sounds cool, thanks for watching!!
Put them on
I think I will and thanks for watching!!
What speedometer app do you use
Found it for free in the Apple store, it is called "Speedometer". It works great and thanks for watching.
He sounds like Kip from Napoleon dynamite
@@mattgentry3826 i love that movie and thanks for watching!!
lol that is a funny movie and ur mower look good keep up the good work
will you make another stuck/spin vid after Milton passes ?
Will try to next week and thanks for watching!!
Hubs not gonna last long on the front like that ask me how I know. Need bearings
We will see and thanks so much for watching.
Are all of your mowers 6 speed?
Most are probably 6 speeds, some are 5 speeds, at least one is a 3 speed. I also have a couple that are 3 speeds, with hi and low range. thanks for watching.
I have a few mud mowers and i have 4 pulling tractor
Sounds like a great collection and thanks for watching.
When will silver bullet comeback
IDK, but I will try to bump it up on the list... thanks for asking and for watching.
Do you have any mower tires that can be shipped to my address and I'm just starting to build mine.
Possible, any idea what you are looking for and what size? thanks for watching. If so, are you paying shipping too?
I what to do this but I can't
Maybe some day... thanks for watching.
Don't scrap that mower you know why I used to do I used to turn them into little trailers and pulled them around the yard with the yard debris in them
That is a good idea and thanks for watching.
Can't wait to see the trailer @@chud327
#TRUEFAN
Thanks so much, I always loving hearing that and thanks for watching.
am i lucky or not i have 26hp v twin crafsman dys 4500 it is a hydro
I would say lucky, but I would try to swap the hydro for a manual, thanks for watching!
Hammes Lodge
That would be a different name for sure and thanks for watching.
sir, for me. just me. your font tires turn more then a drift car. i would put a stop on them a little sooner. there set up to turn real tight as a lawn tractor. but your that. i would put a stop in there.
just me.
Yeah, I did turn too far once in the sand. Might do some stops. Thanks so much for watching!!
Red Rider
There is a heracane coming your way stay safe
Thanks so much, we sure are going to try. thanks for watching!!
Here first
Very cool and thanks so much!!
I’m here first
Sweet and thanks for watching.
To much much coffe
That may be, thanks for watching!!
Is sound nasty
Thanks so much, just put it in a Christmas parade, there was a lot of revving... I love that sound. Thanks for watching!
all that just to go through some little puddles. lol hardly seems worth the effort. just get a quad, way more fun and capable.
So true, great point, used to have one and sold it. This one is most built mostly for deep sand, does pretty much as good as a 2WD atv. My biggest issue is those cost thousands, I bet I have less than $100 in this one... dollar to dollar, this one is so much better. thanks for the advice and for watching. Also, you probably know as good as I do, atv video just don't get as good in the views department.
Why is it more fun with a ATV than this mud mower? It's more fun riding a modified lawn tractor that you have built yourself than riding a ATV that is the same type and model as everyone else have.
Too slow lol
Maybe for some, but I have others that are too fast for me. This one is just about perfect for me. Thanks for watching!!
Its 16FairFax Court Dallas, GA
Just let me know and thanks for watching.
23724 Greenfelder Square
Might be too long for a name, but thanks for watching!!