Thank you, emoneyblue! I recently obtained this unit for a dollar from the local Goodwill. The unit turned on and the control functions worked but the attached outlet was wired wrong I discovered thanks to your video. The darn thing just would not turn on the outlet. Then I wired it like you did and now....JOY! Now my medical marijuana grow room can share the heat with the rest of the house this winter and stay cool during the summer months! My "buds" and I are grateful. A thousand thanks my friend!
Thank you. Very Helpful. I ordered one of these for a sump pump that is in a window well outside and I need a temperature controller to shut the power off when the ambient temperature drops below freezing. And I too forgot that this unit is not pre-wired so I appreciate this video tutorial.
People need to keep in mind that when you twist wires together that are made of two different metals that you will need to keep an eye out for corrosion between the contacts. So, if you can find a wire made of copper you should try to match that with all the wires in the device, it will save you a lot of headache in the long run.
Thank you! This video was exactly what I was looking for! This is the first video I've seen detailing how to actually wire up the temp controller. I'd read enough to know that I needed to rig it up with a cut extension chord but I couldn't find info anywhere as to which color wires needed to be put into which port. Great instruction.
Hey, thanks for doing this video. I set up my Ranco temp controller for my fermentation chamber using your video as a guide. Works like a charm. Thanks!
Excellent video, the attention to detail is quite appreciated. I would make a couple comments though. First of all, it's good practice when running any cables into an electrical box to use a romex connector at the opening. Also, using a simple grounded extension cord could be less expensive than dedicating an entire power strip. The circuit protection really shouldn't be needed, the controller is rated at an operating load of 16A, far more than any fridge or smoker will use.
Great video!! I have this same ranco. 2 questions. 1 How many watts can this model control? (or hold=.. don´t know the terminology...) and 2. do I need any adapter to plug it to a 220 V household electrical current?? Thanks you very much.
you are 100 percent correct I thought I made a suggestion in the video about that I have sense repaired that thank you for your comments they are much appreciated.
Great video and I really like your order of connections ..... Believe me it can get hairy if you do it out of that order. One suggestion though as I build these professional for both the refrigeration and home brewing world. I also am certified nec and by mainstream eng. you are missing one huge safety factor. Step one is missing........ Get a NM cable connector this will prevent the cords coming out if tugged on. Only .44 cents can save your life if you loose a connection and touch it.
@drinkechear Hello there and thanks for stopping by, to answer your question you will need to go to there website and get the wiring diagram Yes this model can do both 110/220 volts not sure off hand how many volts, but I do know of folks using this controller to run water heaters that are over 1500 watts and it depends on how you wire it up and if you have the same one I have you will wire it the way you require it for your particular application. Hope this helps... Google it
@Kimano Hello and thanks for stopping bye, 1st off the power strip was a left over part I had laying around I believe in using up old stuff and making them work again and as far as the romex connector your right but I thought I explained that I was going to add a rubber connector to seal it shut. Thanks for the comments.
@borizlat Really did not know that ... well thanks!!! I will be making more I found 100's of uses around here from smoking, cooling, heating, brewing etc... I just love these controllers. Thanks for commenting.
Yes there is but by another company just look around Ebay for the voltage your using. There getting cheaper and cheaper each day.. Good luck!! thanks for stopping by...
I understand it controls the AC power going to a heater or air conditioner, however how does this application bypass the internal thermostat of the air conditioner to keep it running?
Hey there, Most probes will be the sealed type and you can add any type you need I've seen these used in brewing beer (food safe) for years if its good enough for humans its good enough for the buds... LOL also check out Ebay these a large variety there.
Would this wiring set up allow me to plug in a retail cooler with a compressor that pulls 12 amps? I am a bit confused about the normally open normally closed amp ratings. i just want to know would it be plug and play. thanks
I use mine to control my pool heater. however about a week ago I have an EP error msg....Im going to check the connections in the box aswell as the temperature gauge cord. Any other ideas ? PS great video!
Thanks for creating this tutorial! However, I do have a question: I wired the controller step-by-step exactly how you did in the video. After putting it all together, I plugged the fridge into the controller's power strip and the controller directly into the wall. Both were working fine. About an hour later, the power strip is off and won't turn on. Granted, this power strip was bought used at a thrift store so it may be a dud. Is there anything I could have wired incorrectly to cause this?
Ok so I find it odd that you have to take a jumper and carry over the voltage from the power supply side, over to the load side. Wouldn't the power be supplied once the normally open contact closes from within the contact?
Hi, can I use it on my fish tank to lock it to 77f, 1 degree differential. I have a heater and a chiller I want to control with one thermostat. Thankfully me
Will that control multiple units because it’s wired to a power strip. My application would be used for my aquarium heater. Would i be able to use multiple aquarium heaters if i wired to a power strip?
I have this to keep my wine cooler COLD. Can you show how to set this up for COLD? F SET. 160 degrees SET. 4 degree differential. set. C1 ..... now what?
![เปิดคำทำนาย นอสตราดามุส - บาบา วานก้า ปี 2025 คนทั่วโลกต้องเจออะไรบ้าง? | แฉ 11 ธ.ค. 67 [2/3] |GMM25](http://i.ytimg.com/vi/xmTIKWJUMPM/mqdefault.jpg)
Thank you, emoneyblue! I recently obtained this unit for a dollar from the local Goodwill. The unit turned on and the control functions worked but the attached outlet was wired wrong I discovered thanks to your video. The darn thing just would not turn on the outlet. Then I wired it like you did and now....JOY!
Now my medical marijuana grow room can share the heat with the rest of the house this winter and stay cool during the summer months!
My "buds" and I are grateful. A thousand thanks my friend!
John Erickson
Your very welcome my friend...
Your welcome
Started on a SS Smoker, thanks for the info of the Ranco ETC-111000-000 Digital Temperature Controller I will use it on several of my projects.
Thanks. Just opened the box and didn't realize I had some wiring to do. Just needed to verify the diagram and this was very helpful.
Thank you. Very Helpful. I ordered one of these for a sump pump that is in a window well outside and I need a temperature controller to shut the power off when the ambient temperature drops below freezing. And I too forgot that this unit is not pre-wired so I appreciate this video tutorial.
People need to keep in mind that when you twist wires together that are made of two different metals that you will need to keep an eye out for corrosion between the contacts. So, if you can find a wire made of copper you should try to match that with all the wires in the device, it will save you a lot of headache in the long run.
Thanks for the info
Thank you! This video was exactly what I was looking for! This is the first video I've seen detailing how to actually wire up the temp controller. I'd read enough to know that I needed to rig it up with a cut extension chord but I couldn't find info anywhere as to which color wires needed to be put into which port. Great instruction.
Hey, thanks for doing this video. I set up my Ranco temp controller for my fermentation chamber using your video as a guide. Works like a charm. Thanks!
Excellent video, the attention to detail is quite appreciated. I would make a couple comments though. First of all, it's good practice when running any cables into an electrical box to use a romex connector at the opening. Also, using a simple grounded extension cord could be less expensive than dedicating an entire power strip. The circuit protection really shouldn't be needed, the controller is rated at an operating load of 16A, far more than any fridge or smoker will use.
Nice job man, my previous one blew out after about 9 years and need to buy a new one. They're selling them now for $44 on Amazon
nice
thanks buddy
Great video!! I have this same ranco. 2 questions.
1 How many watts can this model control? (or hold=.. don´t know the terminology...) and
2. do I need any adapter to plug it to a 220 V household electrical current??
Thanks you very much.
you are 100 percent correct I thought I made a suggestion in the video about that I have sense repaired that thank you for your comments they are much appreciated.
Not that I know of wait the is the PID 1000 controller from Ebay but this is the one I had. Glad I could help.. thanks for commenting..
Yeah!! that's what I'm talking about... great Job glad I was able to help. Thanks for your comments.
John, usually the neutral is ribbed where the hot is smooth.
Great video and I really like your order of connections ..... Believe me it can get hairy if you do it out of that order. One suggestion though as I build these professional for both the refrigeration and home brewing world. I also am certified nec and by mainstream eng. you are missing one huge safety factor. Step one is missing........ Get a NM cable connector this will prevent the cords coming out if tugged on. Only .44 cents can save your life if you loose a connection and touch it.
@drinkechear Hello there and thanks for stopping by, to answer your question you will need to go to there website and get the wiring diagram Yes this model can do both 110/220 volts not sure off hand how many volts, but I do know of folks using this controller to run water heaters that are over 1500 watts and it depends on how you wire it up and if you have the same one I have you will wire it the way you require it for your particular application. Hope this helps... Google it
Your welcome always glad to help, thanks for taking the time to comment.
@Kimano Hello and thanks for stopping bye, 1st off the power strip was a left over part I had laying around I believe in using up old stuff and making them work again and as far as the romex connector your right but I thought I explained that I was going to add a rubber connector to seal it shut. Thanks for the comments.
@borizlat Really did not know that ... well thanks!!! I will be making more I found 100's of uses around here from smoking, cooling, heating, brewing etc... I just love these controllers. Thanks for commenting.
This is awesome! Thank you. Using this set up for Sous Vide in crock pot.
Yes there is but by another company just look around Ebay for the voltage your using. There getting cheaper and cheaper each day.. Good luck!! thanks for stopping by...
Glad you enjoyed the video this was my intention to make it helpful to folks .... thanks for commenting..
Glad it helped.. thanks for commenting..
Glad I could help.. thanks for commenting..
It will override the temp and turn it on and off based on the temp you set... Period... it's really that simple.. .thanks for commenting...
@pookieninja Hey glad I could help.... Thanks for the comments :)
I understand it controls the AC power going to a heater or air conditioner, however how does this application bypass the internal thermostat of the air conditioner to keep it running?
@doktordrew Your welcome glad I could help. Thanks for commenting...
@jlaureanti - You are very welcome - thanks for the comment.
Very helpful video thanks for posting it. Is there a better version like smaller with illuminated read out?
Can I use both heater and a cooler on this device at the same time? To lock it to 77f degrees I need for my aquarium ?
Glad you enjoyed it.. .thanks for commenting...
Thanks for the easy instructions!
Your welcome Tony...
Thanks bro! Great instructional video!
Your welcome ... Thanks for commenting.
Nice wright up
Sorry to hear that mate, they had assured me the price would remain the same for awhile, I guess I should have brought more when I had the chance.
Just set mine up using this video, thanks!
Your welcome thanks for the comments...
Hey there,
Most probes will be the sealed type and you can add any type you need I've seen these used in brewing beer (food safe) for years if its good enough for humans its good enough for the buds... LOL also check out Ebay these a large variety there.
Would this wiring set up allow me to plug in a retail cooler with a compressor that pulls 12 amps? I am a bit confused about the normally open normally closed amp ratings. i just want to know would it be plug and play. thanks
I use mine to control my pool heater. however about a week ago I have an EP error msg....Im going to check the connections in the box aswell as the temperature gauge cord. Any other ideas ? PS great video!
Like the Video. Thanks for the info
Thanks for creating this tutorial! However, I do have a question:
I wired the controller step-by-step exactly how you did in the video. After putting it all together, I plugged the fridge into the controller's power strip and the controller directly into the wall. Both were working fine. About an hour later, the power strip is off and won't turn on. Granted, this power strip was bought used at a thrift store so it may be a dud. Is there anything I could have wired incorrectly to cause this?
Thanks for the guide
@doktordrew
Glad to know it helped you out, thanks for leaving your comments.
Your welcome ... thanks for commenting..
Great video!
@qweef69 Glad you enjoyed it, thanks for commenting.
Great video, thank you for posting !
Thanks for the update I just sent them a nasty email. Maybe I will get some special pricing for us!!
Damn this is awesome, thanks emoneyblue and TH-cam.
Your welcome good buddy
In this case,You don't have to cut the green wire.Anyway good video
the extension cord i bought doesn't specify which is hot and which is neutral -- how can i tell which is which?
Ok so I find it odd that you have to take a jumper and carry over the voltage from the power supply side, over to the load side.
Wouldn't the power be supplied once the normally open contact closes from within the contact?
Watch it again... It works... This is the correct way to hook up the unit and it still works today.
interesting video. :)
Awesome video, thanks!
Just out of curiosity, why are people using a surge protector with multiple female outlets vs one female outlet with the male outlet?
Dave Brown
I only used it because I had it already plus the fuse protection is a plus
Hi, can I use it on my fish tank to lock it to 77f, 1 degree differential. I have a heater and a chiller I want to control with one thermostat.
Thankfully me
Great video...Thanks!
Your welcome and thanks for commenting.
@jmoody27 I will have to check the out thanks for sharing.
Will that control multiple units because it’s wired to a power strip. My application would be used for my aquarium heater. Would i be able to use multiple aquarium heaters if i wired to a power strip?
Jap Pino
There is only One temperature probe. But it can control more than one item due to the power strip.
ty for the video.
Myfavsandlikes
Your very welcome my friend...
the way I have it set its heat or cooler, thanks for commenting.
Try Patriot-Supply they have the best price out there.
how can you wire the ETC 111000-000 INTO a airconditioner so it goes down to 30s for a cool room.
That I don’t know but with a freezer I wired it the same plugged the freezer into the unit and used it to keep my beer kegs at the correct temp
Thanks for getting back to me
Great video! This helped me so much and made the wiring easy as can be. Thanks for the solid information and great video.
I have this to keep my wine cooler COLD. Can you show how to set this up for COLD? F SET. 160 degrees SET. 4 degree differential. set. C1 ..... now what?
same way just adjust it to the desired temp and plug into your unit
Great...i thought this was pre-made when i ordered it...
Myfavsandlikes
Hope it helped, because I was so lost when I figured this out the first time...
Yeah man, i knew nothing before wiring this but thanks to ur video i've got it all wired up and working now plus i've learned a few things :)
Myfavsandlikes
Your welcome ...
Your welcome
Great news,
cool
Yes it will turn on or off heater or a cooler PERIOD!
@hsbc2468 Thanks
Maybe a bad power strip just use an extension cord...